Metal Forming & Shaping

  • Capacity 16 GA. MAX. Mild Steel
  • MIN. Slit Width 3/4"
  • MAX. Slit Width 24-3/8"
  • Approx. Speed 65 FPM
  • Mild Steel Capacity 16 ga.
  • Throat Depth 7"
  • Working Height 37.5"
  • Stand Included
$6,179.50
$5,089.00
  • Mild Steel Capacity: 16 ga.
  • Throat Depth: 6"
  • Stand: Included
  • Aluminum Capacity: 14 ga.
$2,305.93
$1,899.00
  • 33" Throat Depth
  • 3-1/2" Diameter Locknig Urethane Casters
  • 12" Leather Shot bag on it' own beating station
  • 8" Diameter Top Wheel for Easy Rolling
$4,795.00
$4,675.00
  • Capacity: 20 Ga Mild Steel (Galvanized) x 60"
  • Bend Length: 24"
  • Dimensions: 40" x 12" x 10"
  • Adjusts for 1/4" to 7/8" Bends
  • Capacity in mild steel: 14 gauge
  • Maximum notch in one cut: 6” x 6”
  • Throat depth: 6-3/4 inches
  • Gage size: 6-1/4” x 2”
  • Capacity 16 GA. MAX. Mild Steel
  • MIN. Slit Width 3/4"
  • MAX. Slit Width 24-3/8"
  • Approx. Speed 65 FPM
  • Blades are guarded to protect the operator
  • Blades can be resharpened for prolonged life
  • CSA/CUS Certified
  • Emergency stop on both the machine and the foot pedal for quick stoppage of the machine
  • Enclosed cabinet with storage shelf
$10,696.64
$8,809.00
  • Mild Steel Capacity: 16 ga.
  • Aluminum Capacity: 14 ga.
  • Tooling Height Adjustment: 11"
  • Throat Depth: 24" adjustable
$2,524.50
$2,079.00
  • Monster 43" Throat Depth
  • Variable Speed
  • Forward/Reverse Foot Control
  • Includes Floor Stand/Tooling
  • Maximum Capacity: 7 ton
  • Mild Steel Capacity: 16 ga.
  • Aluminum Capacity: 14 ga.
  • Throat Depth: 48"
$11,898.79
$9,799.00
On Sale
Jet Pittsburgh Type Lockformer 756090 at Elite Metal Tools
  • All steel forming head with hardened and ground shafts
  • Case hardened steel forming rolls, machine cut gear for long use
  • CSA/CUS Certified
  • Magnetic Switch for motor protection
  • Needle nose roller bearings for years of precision use
$6,167.36
$5,079.00
  • Throat Depth 36"
  • Capacity (Mild Steel) 16 ga.
  • Aluminum Capacity 14 ga.
  • Power 110V
$9,069.50
$7,469.00
  • Perfect Addition To Any Shop
  • Bending Slide Of The LB-8 is Fully Supported By Sealed Ball Bearings
  • Typically In Stock
  • Open Jaw Design
$1,443.79
$1,199.00
  • Operater Controls Beats Per Minute From 0 - 1700
  • It has the ability to shrink, stretch, dome, edge turn, bead, and offset
  • 19" Deep Throat
  • Quick Release Bottom Tooling Holder
$14,582.36
$12,009.00
On Sale
JET 110V Single Phase 24" Planishing Hammer PH-24T JT9-756121 at Elite Metal Tools
  • Workpiece Maximum Gauge (Mild Sheet Steel): 16 ga.
  • Workpiece Maximum Thickness (Aluminum, copper): 1/8”
  • Air Intake Connector: 1/4” NPT
  • Air Regulator: 3-position (3 speed ranges)
$2,852.36
$2,349.00
  • Throat Depth: 45”
  • Capacity: 1/16” (16 Ga) mild steel
  • Height: 63”
  • Top Wheel: 8”
  • Capacity: 20-24 Gauge Mild Steel
  • Flange Right Angle: 7/32”
  • Heavy Duty Cabinet
  • Illuminated Power Switch
On Sale
Baileigh Industrial 3HP 220V Single Phase Power Hammer PH-28HD-VS 1021656 at Elite Metal Tools
  • Mild Steel Capacity: 14 ga.
  • Aluminum Capacity: 10 ga.
  • Tooling Height Adjustment: 2"
  • Throat Depth: 28"
$25,207.36
$20,759.00
  • 18" Throat Depth
  • 18 Gauge Mild Steel Capacity
  • Strengthens Metal
  • Most Popular Bead Roller!!!
$295.00
  • Throat Depth 36"
  • Capacity (Mild Steel) 16 ga.
  • Aluminum Capacity 14 ga.
  • Power 110V
$7,369.50
$6,069.00
  • 37-3/4" Throat Depth
  • Extra High Throat
  • Works up to 1/16" Mild Steel
  • 6" Top Wheel for Easy Operation
  • Capacity: 20 Ga. Maximum
  • Flange Height: approx 7/32" for open-end fittings, straight, and irregular curves
  • Motor: 1/3 HP, 115V, Single Phase 
  • Dimensions: 25" x 25" x 41"
  • 7” OD x 2” Wide Upper Wheel
  • 50” Overall Depth
  • 36-1/2” Deep Throat
  • 30” Throat Height