Letter Brake

  • Combination shear, brake and roll in one compact machine (Shown with optional stand)
  • Right or left hand operation
  • Shear can be used for mild steel, aluminum, brass, copper, lead, plastic and zinc
  • Brake is equipped with easily removable fingers that permit angle, channel, box and other complex bending operations
  • Slip rolls are precision turned and ground with wire grooves
$1,241.43
$1,050
Save $191.43!

  • Wide Assortment of Finger widths allow greater versatilty in the shop
  • Black Ceramic Coated Fingers prevent rust and ensure longer finger life
  • All body sections are welded steel plate with heavy truss rods and braces designed to give greater strength and durability
  • Stop rod for repeatable bending
  • Material clamping is foot operated to save strain on back and arms
$3,230
$2,599
Save $631!

  • *HP-15A Shown in Image
  • For pressing, bending and straightening operations
  • Easy-to-use, hand-operated with pressure gauge for direct pressure readings
  • Tables raise and lower easily with use of hand crank on the 15- and 35on models
  • Side frames are open for inserting long material
$4,564.29
$3,699
Save $865.29!

  • Wide assortment of finger widths allow greater versatility in the shop
  • With fingers installed it can be used as a full-length nose bar, turning the machine into a straight bending brake
  • All body sections are welded steel plate with heavy truss rods and braces designed to give greater strength and durability
  • Both the bed and apron are bored in line to assure the utmost accuracy
  • Counter weights can be moved up or down to adjust desired leverage
$5,342.86
$4,299
Save $1,043.86!

  • Combination shear, brake and roll in one compact machine (Shown with optional stand)
  • Right or left hand operation
  • Shear can be used for mild steel, aluminum, brass, copper, lead, plastic and zinc
  • Brake is equipped with easily removable fingers that permit angle, channel, box and other complex bending operations
  • Slip rolls are precision turned and ground with wire grooves
$1,987.14
$1,607
Save $380.14!

  • ARBOR PRESSES
  • For all production and assembly applications
  • Precision cut steel rams and pinions for accurate operation
  • Tables and slotted table-plates are flat and parallel to provide accurate support
$264.29
$241

  • 22 Gauge Mild Steel Capacity
  • 30" Material Width
  • 1HP Motor
  • 110 Volt

  • Wide Assortment of Finger widths allow greater versatility in the shop
  • Black Ceramic Coated Fingers prevent rust and ensure longer finger life
  • All body sections are welded steel plate with heavy truss rods and braces designed to give greater strength and durability
  • Stop rod for repeatable bending
  • Material clamping is foot operated to save strain on back and arms
$3,354.29
$2,699
Save $655.29!

  • 20 Gauge Mild Steel x 60"
  • 24" Bend Length
  • 96 Lbs
  • 80" x 43" x 34"

  • Perfect Addition To Any Shop
  • Bending Slide Of The LB-8 is Fully Supported By Sealed Ball Bearings
  • Typically In Stock
  • Open Jaw Design

  • 20 Gauge Mild Steel
  • 48" x 48" x 46"
  • 190 Lbs.
  • Approx. Footprint 25" x 22" x 42"

  • *HP-15A Shown in Image
  • For pressing, bending and straightening operations
  • Easy-to-use, hand-operated with pressure gauge for direct pressure readings
  • Two bed plates and pump handles
  • Side frames are open for inserting long material
$1,478.57
$1,223
Save $255.57!

  • ARBOR PRESSES
  • For all production and assembly applications
  • Precision cut steel rams and pinions for accurate operation
  • Tables and slotted table-plates are flat and parallel to provide accurate support

  • ARBOR PRESSES
  • For all production and assembly applications
  • Precision cut steel rams and pinions for accurate operation
  • Tables and slotted table-plates are flat and parallel to provide accurate support

  • All body sections are welded steel plate with heavy truss rods and braces designed to give greater strength and durability
  • Hardened and ground fingers
  • Rubber stops on rear of lower arm to prevent contact with support frame
  • Non-skid foot pedal
  • Set lower beam parallelism more accurately with graduated scale on each side
$3,851.43
$3,099
Save $752.43!

  • All body sections are welded steel plate with heavy truss rods and braces designed to give greater strength and durability
  • Both the bed and apron are bored in line to assure the utmost accuracy
  • Soft grips on top of counter weight bar to prevent damaging the operator's hands
  • Tool less angle stop
  • Soft touch handle grips
$8,450
$6,799
Save $1,651!

  • Wide assortment of finger widths allow greater versatility in the shop
  • With fingers installed it can be used as a full-length nose bar, turning the machine into a straight bending brake
  • All body sections are welded steel plate with heavy truss rods and braces designed to give greater strength and durability
  • Both the bed and apron are bored in line to assure the utmost accuracy
  • Counter weights can be moved up or down to adjust desired leverage
$11,802.86
$9,164
Save $2,638.86!

  • Stand allows bench model brake to be elevated
  • Dimensions (LxWxH): 56-1/2" x 18-1/4" x 28"
  • Stand includes shelf for convenient storage of tools
  • Sturdy aluminum design
$478.57
$444

  • ARBOR PRESSES
  • For all production and assembly applications
  • Precision cut steel rams and pinions for accurate operation
  • Tables and slotted table-plates are flat and parallel to provide accurate support
$1,178.57
$1,004
Save $174.57!

  • Incorporates all the features of our standard hand brakes but with greater range of applications
  • With fingers installed it can be used as a full-length nose bar, turning the machine into a straight bending brake
  • Stop rod for repeatable bending
  • Sectioned fingers are easily removed for box bending and special forming operations
  • Total of 16 assorted size section fingers
$2,111.43
$1,699
Save $412.43!

  • ARBOR PRESSES
  • For all production and assembly applications
  • Precision cut steel rams and pinions for accurate operation
  • Tables and slotted table-plates are flat and parallel to provide accurate support

  • All body sections are welded steel plate with heavy truss rods and braces designed to give greater strength and durability
  • Both the bed and apron are bored in line to assure the utmost accuracy
  • Soft grips on top of counter weight bar to prevent damaging the operator's hands
  • Tool less angle stop
  • Soft touch handle grips
$6,958.57
$5,361
Save $1,597.57!

  • *HP-15A Shown in Image
  • For pressing, bending and straightening operations
  • Easy-to-use, hand-operated with pressure gauge for direct pressure readings
  • Tables raise and lower easily with use of hand crank on the 15- and 35- ton models
  • Side frames are open for inserting long material
$2,700
$2,199
Save $501!