Auxiliary Machine

  • Capacity: 24 GA. MAX. Mild Steel
  • Capacity: 28 GA. MIN. Mild Steel
  • Approx. Speed: 35 FPM
  • 1/2 H.P. electric motor, single phase

  • All steel forming head with hardened and ground shafts
  • Case hardened steel forming rolls, machine cut gear for long use
  • Needle nose roller bearings for years of precision use
  • Reinforced undercarrige for damage free lifting with a fork lift
  • CSA/US: Folloing strict guidelines and electrical requirements, this JET Lockformer is CSA/US certified
$4,570.00
$3,699.00
Save $871!

  • A perfect partner for the TK 16-gauge Pittsburg Roll Former
  • Puts a 3/8″ outside flange on straight or curved sheet metal edges
  • Puts a flange on material with a diameter of as little as 2″
  • Motor: 0.75 HP, 110V, Single Phase

  • Weight: 35 lbs
  • Dimensions: 26 x 16 x 12 in
  • Capacity: 24 Ga Mild Steel
  • UPS: UPS Capable
$665.00

  • Max Capacity: 20 Gauge
  • Min Capacity: 24 Gauge
  • Dimensions: 36" x 17.5" x 34"
  • Weight: 204 lbs

  • Capacity: T-D-P 18-24 ga
  • Forming Sections: 14
  • Shaft Diameter: 1.25″
  • Forming Speed: 50fpm

  • Dimensions: 40″L x 24″W x 44″H
  • Motor: 1 HP, 115/230 Volt, 1800 RPM
  • Capacity: 20-26 Gauge Mild Steel
  • Depth of Pocket: 5/16″ (7.9mm)

  • Drive Cleats 20-26 Ga.
  • Standing Seam 22-26 Ga
  • Male & Female Button Lock 20-24 Ga.
  • Slits & Feeds S & Drive Rolls

  • Capacity: 24-30 Gauge 
  • Speed:  30ft./minute
  • Uses either 3″ or 6″ width blanks 
  • 3″ to 14″ in diameter out of 24 to 30 gauge galvanized

  • 20 Ga Capacity
  • 60 FPM
  • 9 Station button lock rollformer

  • Optional case hardened Drive Cleat roller for Jet's 20 ga Lockformer
  • Creates accurate 1-1/8" drive cleats fast and with ease
  • 20 gauge capacity
  • Case Hardened Steel for durability and accuracy
$707.14
$581.90

  • Capacity: 22-28 Ga
  • Motor: 5 H.P. motor 230/3/60
  • Speed: 90 FPM
  • Dimensions: 69 x 29 x 49 in

  • Dimensions: 41 x 25 x 30 in
  • Speed: Approx. 35 FPM
  • Weight: 305 lbs
  • lange Height: 3/16″

  • Weight: 35 lbs
  • Dimensions: 26 x 16 x 12 in
  • Capacity: 20 Ga x 7/32″
  • Minimum Radius: 1 3/4″
$610.00

  • Tin Knocker
  • 20 Gauge and Lighter Capacity
  • 25" x 25" x 41"
  • 207 Lbs.

  • Optional case hardened Double Seam roller for Jet's 20 ga Lockformer
  • Creats accurate 3/8" double seams with ease
  • 20 gauge capacity
  • Case Hardened Steel for durability and accuracy
$707.14
$581.90

  • Capacity 20ga. Max–28ga Min. Mild Steel
  • Approx. Speed 40 FPM
  • Dimensions 63" x 26" x 34"
  • Approx. Weight 600 LBS

  • 24 Gauge Mild Steel Capacity
  • 1/2 HP, 1700 RPM Motor, 115V, 1Phase 
  • 3/16" Flange Height
  • Approx. 35 FPM Speed

  • Capacity: 20 GA. MAX. Mild Steel
  • Capacity: 26 GA. MIN. Mild Steel
  • Approx. Speed: 25 FPM
  • 1 HP electric motor, 110-115V single phase

  • Capacity: 20 GA. MAX. Mild Steel
  • Capacity: 26 GA. MIN. Mild Steel
  • Approx. Speed: 50 FPM
  • 3 HP electric motor, 208-230V single phase

  • Capacity: 16-20 Ga. uses approx. 1-3/8” of material
  • Motor: 3HP, 230/3/60, 1PH Optional
  • Depth of pocket size: ½” width of hammer-over edge adjustable up to 3/8
  • Speed: 40-45 ft per minute