Searching thousands of products...

  • Variable Blade Speeds Settings 82 to 3,280ft/Min
  • Digital Readout for Viewing Blade Speed
  • Resaw Capacity 13”
  • Spring Loaded Tool-Less Guide System
  • Horsepower: 3 HP TEFC
  • Ram Travel: 4-11/16” (120mm)
  • Working Distance Between Centers: 20” to 40”
  • Swing Over Bed: 23-7/32” to 31-1/4”
  • Dual table ‘T’ slots for use with miter gauges and jigs
  • Table Size: 27” x 40”
  • Maximum Depth of Cut at 90°: 3-1/8”
  • Maximum Depth of Cut at 45°: 2-3/16”
  • Resaw Capacity 13″
  • Dual blade speed ranges – 1445 / 2950 FPM
  • Quick-release blade tension system
  • Dependable 1.50HP 60Hz motor
  • 14″ Cutting Capacity
  • 3 HP 220v 1PH Motor
  • Blade Speed: 4,300 FT/MIN
  • Size: 21-1/2” x 15-3/4”
  • 13″ Cutting Capacity
  • Spring Loaded Tool-less Guide System
  • Adjust 6″ Tall Fence System
  • Quick Adjust Trunnion System
  • Table Size: 31-1/2″ x 51″
  • Mark Speed: 200 – 1400 RPM
  • Vacuum Size: 10″ x 14″ Vacuum Hold-Down Area (Center)
  • Motor: 1HP, 220V, Three Phase
  • 12″ Resaw
  • Blade Length: 115″
  • Table Tilt: Right 45°, Left 7°
  • Motor: 1 3/4 HP, 110 Volt, Single Phase
  • Table Size: 25” x 19”
  • 4 HP 220V, 1Ph Motor
  • Quick Adjust 6″ Tall Rip Fence System
  • Spring-Loaded Tool-less Guide System
  • Distance Between Centers: 36″
  • Swing Over Bed: 24″
  • Max Outboard Swing with optional accessory: 38″
  • Motor: 3HP, 220V, Single Phase
  • Powerful 1.5 HP Motor
  • Variable Speeds
  • Clutch Depth Stop
  • Cast Iron Table
  • Air Flow: 2450 CFM
  • Max Static Pressure: 12.1″ of Water
  • Collection Capacity: 54 Gal
  • Motor: 5 HP, 220 Volt, Single Phase
  • Maximum Work-Piece: 59″ x 16″
  • Spindle Speed: 21,500 RPM
  • Pneumatic Clamps: 4 With Individual Controls
  • Motor: 2HP, 220V, Three Phase
  • Spindle Travel: 4″
  • Fence Size: 4 13/16″ x 16″
  • Capacity Under Nut: 4″ (1 1/4″ Spindle)
  • Motor: 3HP, 220V, Single Phase
  • Air Flow: 4030 CFM
  • Max Static Pressure: 16.8″ of Water
  • Collection Capacity: 54 Gal x 2 sets
  • Motor: 10 HP, 220 Volt, Three Phase
  • Rip Capacity: 36”
  • Arbor Size: 5/8″
  • Max. Depth of Cut At 45°: 2 1/8″
  • Motor: 1.75HP, 110V, Single Phase
  • Sliding Table: 63″
  • Rip Fence: 51″
  • Main Blade Speed: 4000 RPM
  • Motor: 5HP, 220V, Single Phase
  • Belt Size: 25″ x 60″
  • Max Capacity: 5.9″
  • Max Width Capacity: 24 3/8″
  • Motor: 7.5HP, 220V, Single Phase
  • Sanding Belt Size: 37″ x 60″
  • Max Sanding Height: 5 9/10″
  • Max Sanding Width: 36 1/2″
  • Motor: 10HP, 220V, Single Phase
  • Sanding Belt Size: 43″ x 75″
  • Max Sanding Width: 43″
  • Sanding Drum: 1725 RPM
  • Motor: 25HP, 220V, Three Phase
  • Sanding Belt Size: 51″ x 75″
  • Max Sanding Width: 51″
  • Sanding Drum: 1725 RPM
  • Motor: 30HP, 220V, Three Phase
  • Diffusion filter disperses exhausted air
  • Disperses exhausted air
  • Filter guards install and remove easily without tools for quick access to filters
  • Four eye bolts allow suspension from shop ceiling
  • Indicator lights up after 200 hours to remind user to replace filters
  • Cycles air 5X per hour and proven to reduce airborne particles in a 680 sq. ft. area similar to an oversized 2 car garage
  • Easy portability with a convenient carrying handle and includes multiple mounting positions for maximum versatility in the shop
  • Electrostatic filter has a 3000-hour life and easy cleaning accessibility
  • Energy star rated and certified to California Air Resource Board (CARB) and Ozone emission standards
  • Filter cleans easily with vacuum
  • Work Table Length: 79”
  • Panel Thickness (Min – Max): .47″ – 1.77″
  • Glue Tank Capacity: 30 oz Teflon Coated
  • Motor: 220V, Single Phase