Searching thousands of products...

  • Cutting thickness 1,5 mm
  • Cutting range 60°left 60°right
  • Adjustable stop for cuts of the same size
  • Blade cleaning device with brush

  • Maximum Vice Opening - 248mm (9.8")
  • This saw can run at 2 different speeds (33-66 R.P.M.)
  • Here are a few notable features of the SPECIAL 280 CSO:
  • Sawing machine with bow falling controlled by a hydraulic circuit upon cutting, bar feeding and vice closure manually operated, manual head return.

  • Appropriately dimensioned flywheels.
  • Strong band guides with tight stress-raiser bearings and adjustable widia tips.
  • Band stretching is obtained by elector-mechanical blade tensioner with microswitch.
  • Vice with a device for quick approach

  • Round Cutting Capacity: 10” at 90°
  • Flat Cutting Capacity: 11” at 90°
  • Motor: 1 HP 110V Single Phase
  • Vise: Quick Adjusting Camlock
$4,395.00
$4,175.00

  • Round Capacity: 11” at 90°
  • Flat Capacity: 14” at 90°
  • Motor: 1 HP 110 Volt Single Phase
  • Vise: Quick Adjusting Camlock
$4,995.00
$4,695.00

  • Round Cutting Capacity: 10” at 90°
  • Flat Cutting Capacity: 11” at 90°
  • Motor: 1 HP 220V Single Phase
  • Vise: Quick Adjusting Camlock
$4,395.00
$4,175.00

  • Round Capacity: 11” at 90°
  • Flat Capacity: 14” at 90°
  • Motor: 1 HP 220 Volt Single Phase
  • Vise: Quick Adjusting Camlock
$4,995.00
$4,695.00

  • Sawing machine with bow falling controlled by a hydraulic circuit upon cutting, bar feeding and vice closure manually operated, manual head return.
  • Vertical rotation on bolt with adjustable tapered bearings without backlash.
  • High-capacity band control by two-speed motor and special reducer with bronze gear tempered and ground worm screw
  • Appropriately dimensioned flywheels

  • Cutting Speeds: 114- 229 ft/min
  • Band Dims.: 8' 11" x 1" x 0.035”
  • Main Motor: 1.75 HP
  • Capacity: 0°, 45°, 60°, -45°

  • Cutting Speeds: 49-394 ft/min
  • Band Dims.: 226" x 1.6"
  • Chip Conveyer Motor: 0.34 HP
  • Servo Motor: 2 HP

  • Cutting Speeds: 65 – 328 ft/min
  • Band Dims.: 164” x 1.34”
  • Main Motor: 3 HP
  • Capacity: 0°, 30°, 45°

  • Cutting Speeds: 65- 328 ft/min
  • Band Dims.: 124" x 1" x 0.035”
  • Main Motor: 2 HP
  • Capacity: 0°, 45°, 60°, -45°

  • Main Motor: 3 HP
  • Hydraulic Motor: 0.5 HP
  • Coolant Pump: 0.2 HP
  • Capacity: 0°, 30°, 45°, -30°, -45°, -60°

  • Cutting Speeds: 65- 328 ft/min
  • Band Dims.: 331 x 1.61 x 0.051”
  • Main Motor: 10 HP
  • Capacity: 0°, 30°, 45°, 60°

  • Cutting Speeds: 65- 328 ft/min
  • Band Dims.: 236.2 x 1.61 x 0.051”
  • Main Motor: 7.5 HP
  • Capacity: 0°, 30°, 45°, 60°

  • Cutting Speeds: 65-500 ft/min (20-153 m/min)
  • Band Dims.: 291.3" x 2.12" (7400 x 54 mm)
  • Main Motor: 20 HP (15 kW)
  • Capacity: 0°

  • Cutting Speeds: 114- 229 ft/min
  • Band Dims.: 107.5" x 1" x 0.035"
  • Main Motor: 1.75 HP
  • Capacity: 0°, 45°, 60°, -45°

  • Table Tilt: 0-45°
  • Max Cutting Width: 345 mm
  • Rip Fence Height: 152 mm
  • Motor: 1 3/4 HP

  • Table Tilt: 45º
  • Max cutting Width: 15”
  • Table Length: 131"
  • Motor: 3 HP, 1 Phase

  • Table Tilt: 45º
  • Max cutting Width: 15”
  • Table Length: 165"
  • Motor: 5 HP, 1 Phase