Quantum Machinery Manual Band Saw with Hydraulic Auto-Head Descent S 411 CSO

Description 

The basic characteristics of the Special 411 CSO, such as rigidity of the blade support, flywheel dimensioning, band guides, and band stretching, have been thoroughly studied to avoid yielding of the band, increase its durability, and improve linearity and time of cutting.

Specifications 

Round Tube Cutting at 90° (Straight Cut) - 11.8"
Round Tube Cutting at 45° Right - 7"
Round Tube Cutting at 45° Left- 9.45"
Round Tube Cutting at 60° Left - 5.5"
Square Tube Cutting at 90° (Straight Cut) - 11"
Square Tube Cutting at 45° Left - 8.6"
Square Tube Cutting at 45° Right - 6.3"
Square Tube Cutting at 60° Left - 5.5"
Rectangular Tube Cutting at 90° (Straight Cut) - 7.8" Height x 15.7" Width
Rectangular Tube Cutting at 45° Left - 5.1" Height x 9.45" Width
Rectangular Tube Cutting at 45° Right - 4.3" Height x 7" Width
Rectangular Tube Cutting at 60° Left- 5.5" Height x 5.5" Width
Maximum Vice Opening - 400mm(15.7")
This saw can run at 2 different speeds (38-77 R.P.M.)

Here are a few notable features of the S 411 CSO:
Sawing machine with bow falling controlled by a hydraulic circuit upon cutting, bar feeding and vice closure manually operated, manual head return.
Vertical rotation on bolt with adjustable tapered bearings without backlash.
High-capacity band control by two-speed motor and special reducer with bronze gear tempered and ground worm screw
Appropriately dimensioned flywheels
Strong band guides with tight stress-raiser bearings and adjustable widia tips.
Band stretching is obtained by electro-mechanical blade tensioner with microswitch.
Vice with a device for quick approach
Accident-preventing devices on the flywheel casing, on the control handle and on the blade.
Hydraulic cylinder for controlled descent
Cutting thickness 1,2 mm
Cutting range 45° left 60° right
24 V low tension plant
Adjustable stop for cuts of the same size
Pedestal with chip collection tray and removable tank for coolant
Machine pre-arranged to be moved on transpallet
0,06 kW power-driven pump for band cooling
The basic characteristics of the machine, such as rigidity of the blade support, flywheel dimensioning, band guides, and band stretching, have been thoroughly studied to avoid yielding of the band, increase its durability, and improve linearity and time of cutting.