Cantek

  • Layout
Cantek Three Phase 230V Automatic Edgebander with Premilling & Corner Rounding MX370P at Elite Metal Tools
Cantek Three Phase 230V Automatic Edgebander with Premilling & Corner Rounding MX370P
  • Panel thickness: 0.315”~1.77” (8~45 mm)
  • Edge thickness: 0.0158”~0.118” (0.4 ~ 3 mm)
  • Working table height: 38” (960 mm)
  • Power: 10.9 HP 230V Three Phase
$40,215
As low as $795.85/mo
View Details
Cantek 12” x 166” Oscillating Edge Sander OES-512D at Elite Metal Tools
Cantek 12” x 166” Oscillating Edge Sander OES-512D
  • Sanding motor: 10 HP
  • Sanding belt size: 12” x 166”
  • Front & Rear Table Size: 10.43” x 60.9”
  • Table: side: 13.8” x 17.7”
$12,075
As low as $392.43/mo
View Details
Cantek Single Phase Standard Automatic Edgebander MX340M at Elite Metal Tools
Cantek Single Phase Standard Automatic Edgebander MX340M
  • Feeding speed: 23 FPM
  • Panel thickness: 0.472~1.77”
  • Edge thickness: 0.0158”~0.118”
  • Power: 5 HP Single Phase
$18,585
As low as $367.79/mo
View Details
Cantek 230V 3-Sided Linear Brush Sander LBS-300-5S at Elite Metal Tools
Cantek 230V 3-Sided Linear Brush Sander LBS-300-5S
  • Max. working width: 11″
  • Max. working height: 4″
  • Feed speed (Variable): 6.5 ~ 27 FPM
  • Speed of sanding wheel: 200 ~ 1200 RPM            
$18,690
As low as $369.87/mo
View Details
Cantek 6” Single End Tenoner ST152C at Elite Metal Tools
Cantek 6” Single End Tenoner ST152C
  • Spindle Diameter: 1.25”
  • Sliding Table Area: 50.4” x 17.7”
  • Maximum Sawblade Diameter: Ø 12”
  • Maximum Tenon Cut Length: 6”
$17,535
As low as $347.01/mo
View Details
Cantek Standard Single Phase Automatic Edgebander with Pre-milling MX350M at Elite Metal Tools
Cantek Standard Single Phase Automatic Edgebander with Pre-milling MX350M
  • Feeding speed: 23 FPM (7 m/min.)
  • Panel thickness: 0.472~1.77” (12~45 mm)
  • Edge thickness: 0.0158”~0.118”  (0.4 ~ 3 mm)
  • Working table height: 33.7” (856mm)
$24,675
As low as $488.31/mo
View Details
Cantek 230V Single Phase 29FPM Automatic Compact Edgebander with Quick-Change Glue Pot MX340 at Elite Metal Tools
Cantek 230V Single Phase 29FPM Automatic Compact Edgebander with Quick-Change Glue Pot MX340
  • Panel thickness: 0.315” - 1.77”
  • Min panel length: 6.7”
  • Working table height: 33.5”
  • Dust collection outlet: Ø 5” x 2 = 1200 CFM 
$24,045
As low as $475.85/mo
View Details
Cantek Classic S Single Phase 36” x 60” Wide Belt Sander S371 at Elite Metal Tools
Cantek Classic S Single Phase 36” x 60” Wide Belt Sander S371
  • Main Motor: 10 HP
  • Working Width: 37″
  • Minimum Part Length: 12.5″
  • Maximum Thickness Opening: 5″
$19,740
As low as $390.65/mo
View Details
Cantek 230V Three Phase 43” Wide Belt Sander with 20HP Motor and 60” Belt C431 at Elite Metal Tools
Cantek 230V Three Phase 43” Wide Belt Sander with 20HP Motor and 60” Belt C431
  • Abrasive belt size: 44” x 60”
  • Max width stock: 43”
  • Max thickness opening: 5.9”
  • Feed speed (variable): 13 to 52 FPM
$27,825
As low as $550.65/mo
View Details
Cantek 9” x 138” Oscillating Edge Sander PW-120E at Elite Metal Tools
Cantek 9” x 138” Oscillating Edge Sander PW-120E
  • Working Capacity (LxH) 47” x 8”
  • Belt Size (LxH) 138 ½” x 9”
  • Sanding Belt Speed 1080 m/min (3544 FPM)
  • Motor 3HP: 230-volt 3 phase
$8,190
As low as $266.17/mo
View Details
Cantek 230V Three Phase 36” Wide Belt Sander with 60” Belt C371 at Elite Metal Tools
Cantek 230V Three Phase 36” Wide Belt Sander with 60” Belt C371
  • Abrasive belt size: 37” x 60” 
  • Main motor: 20HP 
  • Feed speed (variable): 13 to 52 FPM
  • Max thickness opening: 5”
$21,000
As low as $415.59/mo
View Details
Cantek 230V Single Phase 36” Wide Belt Sander with 60” Belt C371 at Elite Metal Tools
Cantek 230V Single Phase 36” Wide Belt Sander with 60” Belt C371
  • Abrasive belt size: 37” x 60” 
  • Main motor: 10HP 
  • Feed speed (variable): 13 to 52 FPM
  • Max thickness opening: 5”
$21,840
As low as $432.21/mo
View Details
Cantek 1HP Three Phase Automatic Edgebander MX370M (3PH) at Elite Metal Tools
Cantek 1HP Three Phase Automatic Edgebander MX370M (3PH)
  • Panel Thickness: 0.472 -1.77”
  • Edge Thickness: 0.0158”-0.118”
  • Feeding Speed: 23 FPM (7 m/min.)
  • Feed Motor: 1 HP
$29,610
As low as $585.98/mo
View Details
Cantek 230V Three Phase 29FPM Automatic Pre-Milling Compact Edgebander with Quick-Change Glue Pot MX350 at Elite Metal Tools
Cantek 230V Three Phase 29FPM Automatic Pre-Milling Compact Edgebander with Quick-Change Glue Pot MX350
  • Panel thickness: 0.315” - 1.77”
  • Max pre-milling thickness: 1.77”
  • Working table height: 33.5”
  • Dust collection outlet: Ø 5” x 3 = 1800 CFM 
$33,285
As low as $658.71/mo
View Details
Cantek 230V Three Phase 25” Wide Belt Sander C251 at Elite Metal Tools
Cantek 230V Three Phase 25” Wide Belt Sander C251
  • Abrasive belt size: 25” x 60”
  • Maximum width stock: 24”
  • Maximum thickness opening: 4”
  • Infeed table: 11-1/2”
$12,390
As low as $402.67/mo
View Details
Cantek 230V Three Phase 37” Two Head Wide Belt Sander with Variable Feed Speed C372 at Elite Metal Tools
Cantek 230V Three Phase 37” Two Head Wide Belt Sander with Variable Feed Speed C372
  • Abrasive belt size: 37” x 60”
  • Main motor (First head): 20HP 
  • Max thickness opening: 5”
  • Feed speed (variable): 13 to 52 FPM 
$30,450
As low as $602.60/mo
View Details
Cantek Classic S Single Phase 24" x 60" Wide Belt Sander S251 at Elite Metal Tools
Cantek Classic S Single Phase 24" x 60" Wide Belt Sander S251
  • Abrasive Belt Size: 25” x 60”
  • Working Width: 25″
  • Minimum Part Length: 13″
  • Minimum Thickness Opening: 5″
$14,490
As low as $470.92/mo
View Details
Cantek Professional SR 230V Three Phase 37” Two Head Wide Belt Sander with 75” Belt SR37DA at Elite Metal Tools
Cantek Professional SR 230V Three Phase 37” Two Head Wide Belt Sander with 75” Belt SR37DA
  • 1st Main Motor: 20 HP
  • Working Width: 36″
  • Minimum Part Length: 16.9″
  • Maximum Thickness Opening: 4.7″
$45,465
As low as $899.75/mo
View Details
Cantek Planer Sander Series 230V Three Phase 36” Wide Belt Sander SPL900NDA at Elite Metal Tools
Cantek Planer Sander Series 230V Three Phase 36” Wide Belt Sander SPL900NDA
  • Abrasive belt size: 36” x 75” 
  • Min part length: 16.9”
  • Max thickness opening: 4.7”
  • Feed speed (variable): 31 to 59 FPM 
$49,560
As low as $980.79/mo
View Details
Cantek 230V Three Phase 29FPM Automatic Compact Edgebander with Quick-Change Glue Pot MX340 at Elite Metal Tools
Cantek 230V Three Phase 29FPM Automatic Compact Edgebander with Quick-Change Glue Pot MX340
  • Panel thickness: 0.315” - 1.77”
  • Min panel length: 6.7”
  • Working table height: 33.5”
  • Dust collection outlet: Ø 5” x 2 = 1200 CFM 
$24,465
As low as $484.16/mo
View Details
Cantek Three Phase Standard Automatic Edgebander MX340M at Elite Metal Tools
Cantek Three Phase Standard Automatic Edgebander MX340M
  • Feeding speed: 23 FPM
  • Panel thickness: 0.472~1.77”
  • Edge thickness: 0.0158”~0.118”
  • Power: 5 HP Three Phase
$18,585
As low as $367.79/mo
View Details
Cantek 9” x 165” Oscillating Edge Sander OES-509D at Elite Metal Tools
Cantek 9” x 165” Oscillating Edge Sander OES-509D
  • Sanding motor: 7.5 HP
  • Sanding belt size: 9” x 165”
  • Front & Rear Table Size: 10.43” x 60.9”
  • Table: side: 13.8” x 17.7”
$10,500
As low as $341.25/mo
View Details
Cantek Standard Three Phase Automatic Edgebander with Pre-milling MX350M at Elite Metal Tools
Cantek Standard Three Phase Automatic Edgebander with Pre-milling MX350M
  • Feeding speed: 23 FPM (7 m/min.)
  • Panel thickness: 0.472~1.77” (12~45 mm)
  • Edge thickness: 0.0158”~0.118”  (0.4 ~ 3 mm)
  • Working table height: 33.7” (856mm)
$24,675
As low as $488.31/mo
View Details
Cantek 6” x 108” 1.5 HP Single Phase Edge Sander CT-108 at Elite Metal Tools
Cantek 6” x 108” 1.5 HP Single Phase Edge Sander CT-108
  • Sanding belt size: 6″ x 108″
  • Motor: 1.5 HP (1-Phase)
  • Front table: 37″ x 7 ¾”
  • Side table: 19″ x 12″
$3,360
As low as $109.20/mo
View Details

First opening in 1991 and since then have become an internationally acclaimed brand and a pioneer of the global market. They are located in Antalya, Turkey. Cantek is a big supplier of solid wood and panel machinery. They have made a big expansion in their company in the past 31 years in the woodworking machinery industry. 

If you are interested in woodworking saws or anything else Cantek has to offer please contact us. Here at Elite Metal Tools we work our hardest to satisfy all questions and have low prices.