Cantek

  • Layout
Cantek 2 HP Three Phase Automatic Dovetailer JDT-75 at Elite Metal Tools
Cantek 2 HP Three Phase Automatic Dovetailer JDT-75
  • Fixed pitch: 1” (25mm)
  • Spindle diameter shank: 0.472” (12mm)
  • Spindle motor: 2 HP
  • Feed speeds: (3) 16, 22, 31 cycles/min
$13,125
As low as $426.56/mo
View Details
Cantek Single Phase Manual Dovetail Machine JDT-65 at Elite Metal Tools
Cantek Single Phase Manual Dovetail Machine JDT-65
  • Min. workpiece size: 7.9″ x 2.4″
  • Max. workpiece size: 59″ x 16.5″
  • Dovetail spacing: 1″, 1.5″, 2″, 2.5″
  • Table height from floor: 46.5″
$7,455
As low as $242.28/mo
View Details
Cantek 7.5HP Pneumatic Overarm Pin Router SR750 at Elite Metal Tools
Cantek 7.5HP Pneumatic Overarm Pin Router SR750
  • Chuck to Table Top Maximum: 11″
  • Throat Clearance: 29.5″
  • Spindle Speeds (2 Speeds): 10,000 / 20,000 RPM
  • Spindle Travel: 3.75″
$15,120
As low as $299.22/mo
View Details
Cantek Classic S Single Phase 37” x 60” Wide Belt Sander S371 at Elite Metal Tools
Cantek Classic S Single Phase 37” x 60” Wide Belt Sander S371
  • Main Motor: 10 HP
  • Working Width: 36″
  • Minimum Part Length: 12.5″
  • Maximum Thickness Opening: 5.9″
$20,895
As low as $413.51/mo
View Details
Cantek 230V Three Phase 43” Wide Belt Sander with 20HP Motor and 60” Belt C431 at Elite Metal Tools
Cantek 230V Three Phase 43” Wide Belt Sander with 20HP Motor and 60” Belt C431
  • Abrasive belt size: 44” x 60”
  • Max width stock: 43”
  • Max thickness opening: 5.9”
  • Feed speed (variable): 13 to 52 FPM
$28,980
As low as $573.51/mo
View Details
Cantek 230V Single Phase 36” Wide Belt Sander with 60” Belt C371 at Elite Metal Tools
Cantek 230V Single Phase 36” Wide Belt Sander with 60” Belt C371
  • Abrasive belt size: 37” x 60” 
  • Main motor: 10HP 
  • Feed speed (variable): 13 to 52 FPM
  • Max thickness opening: 5”
$22,995
As low as $455.07/mo
View Details
Cantek 230V Three Phase 36” Wide Belt Sander with 60” Belt C371 at Elite Metal Tools
Cantek 230V Three Phase 36” Wide Belt Sander with 60” Belt C371
  • Abrasive belt size: 37” x 60” 
  • Main motor: 20HP 
  • Feed speed (variable): 13 to 52 FPM
  • Max thickness opening: 5”
$22,050
As low as $436.36/mo
View Details
Cantek SRN-Series 230V Three Phase Heavy-Duty 53”x75” Widebelt Planer-Sander with Variable Feed Speed SR1300NDA at Elite Metal Tools
Cantek SRN-Series 230V Three Phase Heavy-Duty 53”x75” Widebelt Planer-Sander with Variable Feed Speed SR1300NDA
  • 1st main motor (planer): 40 HP 
  • Min part length: 16.9”
  • Feed speed (variable): 13 to 59 FPM
  • Pass line height: 37” 
$107,730
As low as $2,131.97/mo
View Details
Cantek SRN-Series 460V Three Phase Heavy-Duty 53”x75” Widebelt Planer-Sander with Variable Feed Speed SR1300NDA at Elite Metal Tools
Cantek SRN-Series 460V Three Phase Heavy-Duty 53”x75” Widebelt Planer-Sander with Variable Feed Speed SR1300NDA
  • 1st main motor (planer): 40 HP 
  • Min part length: 16.9”
  • Feed speed (variable): 13 to 59 FPM
  • Pass line height: 37” 
$107,730
As low as $2,131.97/mo
View Details
Cantek 230V Three Phase 25” Wide Belt Sander C251 at Elite Metal Tools
Cantek 230V Three Phase 25” Wide Belt Sander C251
  • Abrasive belt size: 25” x 60”
  • Maximum width stock: 24”
  • Maximum thickness opening: 4”
  • Minimum part length: 13”
$12,915
As low as $419.73/mo
View Details
Cantek Planer Sander Series 230V Three Phase 36” Wide Belt Sander SPL900NDA at Elite Metal Tools
Cantek Planer Sander Series 230V Three Phase 36” Wide Belt Sander SPL900NDA
  • Abrasive belt size: 36” x 75” 
  • Min part length: 16.9”
  • Max thickness opening: 4.7”
  • Feed speed (variable): 31 to 59 FPM 
$52,710
As low as $1,043.13/mo
View Details
Cantek Classic S Single Phase 25" x 60" Wide Belt Sander S251 at Elite Metal Tools
Cantek Classic S Single Phase 25" x 60" Wide Belt Sander S251
  • Abrasive Belt Size: 25” x 60”
  • Working Width: 24″
  • Minimum Part Length: 13″
  • Minimum Thickness Opening: 5.9″
$15,330
As low as $303.38/mo
View Details
Cantek 230V Three Phase 37” Two Head Wide Belt Sander with Variable Feed Speed C372 at Elite Metal Tools
Cantek 230V Three Phase 37” Two Head Wide Belt Sander with Variable Feed Speed C372
  • Abrasive belt size: 37” x 60”
  • Main motor (First head): 20HP 
  • Max thickness opening: 5”
  • Feed speed (variable): 13 to 52 FPM 
$32,025
As low as $633.77/mo
View Details
Cantek SR-Series 230V Three Phase 37”x75” Variable-Speed Two-Head Wide Belt Sander with Steel Contact Drum SR37DA at Elite Metal Tools
Cantek SR-Series 230V Three Phase 37”x75” Variable-Speed Two-Head Wide Belt Sander with Steel Contact Drum SR37DA
  • Working width: 36”
  • Max thickness opening: 4.7”
  • Feed speed (variable): 13 to 59 FPM
  • Pass line height: 37”
$50,190
As low as $993.26/mo
View Details
Cantek SR-Series 230V Three Phase 37”x75” Variable-Speed Two-Head Wide Belt Sander with Rubber Contact Drum SR37DA at Elite Metal Tools
Cantek SR-Series 230V Three Phase 37”x75” Variable-Speed Two-Head Wide Belt Sander with Rubber Contact Drum SR37DA
  • Working width: 36”
  • Max thickness opening: 4.7”
  • Feed speed (variable): 13 to 59 FPM
  • Pass line height: 37”
$48,090
As low as $951.70/mo
View Details
Cantek SR-Series 230V Three Phase Two-Head 53”x75” Widebelt Sander with Variable Feed Speed SR52DA at Elite Metal Tools
Cantek SR-Series 230V Three Phase Two-Head 53”x75” Widebelt Sander with Variable Feed Speed SR52DA
  • Abrasive Belt Size: 53” x 75”
  • Max thickness opening: 4.7”
  • Feed speed (variable): 13 to 59 FPM
  • Pass line height: 37”
$69,195
As low as $1,369.36/mo
View Details
Cantek Classic S 20HP 230V Three Phase 37" x 60" Two Head Wide Belt Sander S372 at Elite Metal Tools
Cantek Classic S 20HP 230V Three Phase 37" x 60" Two Head Wide Belt Sander S372
  • Feed Motor: 1 HP
  • Working Width: 36″
  • Minimum Part Length: 12.5″
  • Maximum Thickness Opening: 5.9″
$27,405
As low as $542.34/mo
View Details
Cantek 230V Three Phase 43” Shared Motor Two Head Wide Belt Sander S432 at Elite Metal Tools
Cantek 230V Three Phase 43” Shared Motor Two Head Wide Belt Sander S432
  • Abrasive belt size: 43” x 60”
  • First main motor: 25HP
  • Feed speed (variable): 15 to 49 FPM
  • Max thickness opening: 5.9” 
$34,230
As low as $677.41/mo
View Details
Cantek C-Series 230V Three Phase Two-Head 43” Widebelt Sander C432 at Elite Metal Tools
Cantek C-Series 230V Three Phase Two-Head 43” Widebelt Sander C432
  • Max width stock: 43”
  • Abrasive Belt Size: 44” x 60”
  • Feed speed (variable): 13 to 52 FPM
  • Max thickness opening: 5”
$40,950
As low as $810.40/mo
View Details
Cantek 230V Single Phase 25” Wide Belt Sander C251 at Elite Metal Tools
Cantek 230V Single Phase 25” Wide Belt Sander C251
  • Abrasive belt size: 25” x 60”
  • Maximum width stock: 24”
  • Maximum thickness opening: 4”
  • Minimum part length: 13”


 

$13,755
As low as $447.03/mo
View Details
Cantek 230V Three Phase 43” Combination Head Wide Belt Sander S431 at Elite Metal Tools
Cantek 230V Three Phase 43” Combination Head Wide Belt Sander S431
  • Abrasive Belt Size: 43” x 60”
  • Main Motor: 20HP
  • Feed Speed (Variable): 15 to 60 FPM
  • Maximum Thickness Opening: 5.9”
$29,995
As low as $593.60/mo
View Details
Cantek Classic S Three Phase 25" x 60" Wide Belt Sander S251 at Elite Metal Tools
Cantek Classic S Three Phase 25" x 60" Wide Belt Sander S251
  • Abrasive Belt Size: 25” x 60”
  • Working Width: 24″
  • Minimum Part Length: 13″
  • Minimum Thickness Opening: 5.9″
$14,910
As low as $484.57/mo
View Details
Cantek Classic S Three Phase 37” x 60” Wide Belt Sander S371 at Elite Metal Tools
Cantek Classic S Three Phase 37” x 60” Wide Belt Sander S371
  • Main Motor: 15 HP
  • Working Width: 36″
  • Minimum Part Length: 12.5″
  • Maximum Thickness Opening: 5.9″
$20,895
As low as $413.51/mo
View Details
Cantek SRN-Series 460V Three Phase Heavy-Duty 43”x75” Widebelt Planer-Sander with Variable Feed Speed SR1100NDA at Elite Metal Tools
Cantek SRN-Series 460V Three Phase Heavy-Duty 43”x75” Widebelt Planer-Sander with Variable Feed Speed SR1100NDA
  • 1st main motor (planer): 40 HP 
  • Min part length: 16.9”
  • Max thickness opening: 4.7”
  • Feed speed (variable): 13 to 59 FPM 
$81,690
As low as $1,616.64/mo
View Details

First opening in 1991 and since then have become an internationally acclaimed brand and a pioneer of the global market. They are located in Antalya, Turkey. Cantek is a big supplier of solid wood and panel machinery. They have made a big expansion in their company in the past 31 years in the woodworking machinery industry. 

If you are interested in woodworking saws or anything else Cantek has to offer please contact us. Here at Elite Metal Tools we work our hardest to satisfy all questions and have low prices.