BendPak 220V Single Phase 27,000 lbs. Extended Heavy Duty 4-Post Lift BEN HDS-27X

Description

With 317.5" runways, the HDS-27X is the first extended-length model in BendPak's super-duty four-post series. As a super-long lift that holds up to 27,000 lbs., this incredibly versatile lift accommodates massive Class 7 semi-trucks. There isn't much this lift can't handle.

Commercial lifting solutions for semi-trucks and other municipal vehicles fall into a category all their own. That's because vehicles reaching the 27,000-lb. lift capacity begin to develop monstrous proportions. The super-long HDS-27X handles stretch limos, semi-trucks, city buses and other super-duty vehicles. In fact, 27,000 lbs. should handle a typical garbage truck without a hitch. The best part of being in the heavy-duty maintenance industry is that your competition is relatively low. Most auto shops veer away from servicing commercial fleets. They require specialized equipment (which BendPak makes easy to obtain) and more shop space, which you probably already have covered! If you want to dominate your industry with a reliable commercial fleet of lifts, you'll absolutely need the incredible HDS-27X.

• Extended Runways
  • BendPak’s 317.5" runways are absolutely massive. To put it in perspective, that's nearly 27 feet long. Runways are made wide and rise 58.25" in the air, so operators can work on virtually anything in a comfortable standing position.
• Dual-Hub Cable Sheaves
  • To protect your investment, each sheave is a massive 12” in diameter. The equally impressive 4" sheave axles greatly extend the lifespan of your car lift by reducing the overall wear on the critical lifting components (cables, sheaves, axles, etc.).
• Large Base Plates
  • A super-duty lift requires extreme supports. Substantial 12" x 12" base plates hold up the massive columns on this lift for maximum structural integrity.
• Spring-Loaded Safety Locks
  • Multiple lock positions engage as the lift rises and instantly release upon descent. Operators need not maneuver around the lift, as is the case with other brands' manual release systems. The runway movement is kept level at all times by a built-in flow divider, so operations in fast-paced shops can go on unimpeded by worry about the lifting equipment.
• Secondary Lock System
  • With two safety lock systems built into the lift, it's virtually impossible for a well-maintained and properly used BendPak to fail. In the extremely rare and unlikely event that excess cable slack develops, the runways will be caught by the secondary system, the vehicle will remain level, and you will be able to safely fix the problem.
• Rolling Bridge Jacks
  • Bridge jacks raise the wheels above the runways. Be sure to explore heavy-duty models, such as the RJ15000, a 15,000-lb. jack that's ideal for super-duty vehicles. Two jacks will raise all four vehicles off the runways for full access to the wheels. For many vehicles of this size, two-post lifts are not ideal for efficient and/or safe lifting. Four-post lifts and rolling bridge jacks are often the best way to perform wheel service. The jacks also prevent the need for additional space-consuming machinery.

Features

• 27,000-lb. lifting capacity
• CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN-1493
• Supersized 12" diameter cable sheaves
• Galvanized lifting cables
• Grease nipples
• Single hydraulic under-runway cylinder
• Integrated flow restrictor
• Durable powder coat
• Spring-loaded safety locks
• Second lock system on constant guard
• Fully enclosed lifting cables
• Multiple adjustable height locking positions
• Maintenance-free electric hydraulic power system
• Conveniently positioned operator controls
• 12" x 12" base plates
• Optional rolling jacks
• Warranty
  • 5 Years on Lift Structure
  • 2 Years on Hydraulic Cylinder(s) and Power Unit
  • 1 Year on Operating Components
  • 1 Year on Electrical Components (Excluding Power Unit)
  • 1 Year on Labor

Specifications

• Capacity
  • Lifting Capacity: 27,000 lbs. (12,247 kg)
  • Max Capacity / Front Axle: 13,500 lbs. (6,123 kg)
  • Max Capacity / Rear Axle: 13,500 lbs. (6,123 kg)
• Rise
  • Min. Runway Height: 9.5" (241 mm)
  • Max. Rise: 61.25" (1,556 mm)
  • Max. Lifting Height: 69.5" (1,765 mm)
  • Time to Full Rise: 75 seconds
• Dimensions
  • Overall Width: 153.5" (3,899 mm)
  • Outside Length: 317.5" (8,065 mm)
  • Overall Length: 372.75" (9,468 mm)
  • Height of Columns: 91.25" (2,318 mm)
  • Width Between Columns: 133.5" (3,391 mm)
  • Drive-Thru Clearance: 109" (2,769 mm)
• Runways
  • Runway Width: 22" (559 mm)
  • Length of Runways: 372.75" (9,468 mm)
  • Width Between Runways: 40" (1,016 mm) or 45.25" (1,149 mm)
  • Runway Centerline: 67.25" (1,708 mm) or 72.5" (1,842 mm)
  • Outside Edge of Runways: 89.25" (2,267 mm) or 94.5" (2,400 mm)
• Minimum Wheelbase
  • Rated Capacity: 230" (5,842 mm)
  • 75% Capacity: 195" (4,953 mm)
  • 50% Capacity: 165" (4,191 mm)
  • 25% Capacity: 130" (3,302 mm)
• Locking
  • Locking Positions: 13
  • Lock Spacing: Every 4" / 100 mm
• Power Unit
  • Motor: 220 VAC / 60 Hz. 1Ph.
  • Noise: 45 dB
• Shipping
  • Weight: 6,944 lbs. (3,149 kg)
  • Dimensions: 265'' x 27'' x 36'' (6,731 mm x 685 mm x 914 mm)

Options

• 5150029 – LITESTIX™ LS36SMD: Lithium Rechargeable Underhood Work Light / 1,200 Lumens
• 5210438 – WSA-100: Air-Electric Workstation / Fits BendPak 2-Post & 4-Post Lifts
• 5150509 – Rolling Oil Drain Pan: 15 Gallon Rolling Drain Pan For 4-Post Lifts
• 5175349 – JP-6: 6,000-lb. Capacity / Telescoping Sliding Jack Platform
• 5175801 – Boat Trailer Platform: 3,000-lb. Capacity / Telescoping Boat Trailer Tongue Platform
• Rolling jacks