Grinding & Sanding

  • Max. Width: 36”
  • Max. Thickness: 9”, varies with brush style
  • Brush: 9”-12” typical diameter
  • Motor: 7 1/2 HP, 220 Volt, Three Phase
  • Table Adjustments Downward 45°
  • Table Adjustments Upward 30°
  • Disc Diameter 20"
  • Disc Speed 1,100 rpm
$3,607.31
$2,969.00
  • Fixed Speed: 6000 SFPM
  • Contact Wheel Size: 5” x 2"
  • Throat Clearance: 7-1/2”
  • Motor: 1 HP 120V Single Phase
$2,451.00
$2,275.00
  • Swing Over Table: 10"
  • Distance Between Center: 27 1/2"
  • Grinding Wheel Spindle RPM: 2600, 3700, 6200 RPM
  • Voltage: 220/440V AC / 3PH
  • 4.5 Cubic Feet capacity
  • Motor: 1-1/2 HP 120V Single Phase
  • Max Length Part: 34”
  • Quiet performance
$8,206.00
$7,534.27
  • Type of Operation: Hydraulic Reciprocation, Electric Cross and Downfeed
  • Table/Cross Travel Max: 24.8" x 12.6"
  • Grinding Wheel Supplied: 12" x 1-1/4" - 3" hole
  • Spindle RPM: 1680
$33,990.00
$32,995.00
  • 10″ x 90″ sanding belt and will also accept woven conditioning belts for polishing!
  • Large 10″ x 28″ platen work area for sanding large surface areas.  Get parts FLAT!
  • 10 hp motor for great power, no stalling!  Replaceable platen!
  • This unit is designed and MADE IN THE USA SINCE 1960!
  • For grinding and refinishing cylindrical shapes
  • Grind difficult to reach areas with the 3" X 2" or 1-1/2" X 2" diameter contact wheels
  • MADE IN THE U.S.A.
  • Performs intricate contouring or internal finishing on uniquely shaped parts
  • Puts a satin finish on steel, iron or aluminum
$3,131.40
$2,549.00
  • Adjustable Dust port with high dust collection efficiency and drive sparks away from the Operator
  • Aluminum casted drive wheel for years of use
  • Flat and Angular Stock: Platen setting is the perfect angle for high speed, precision flat and level grinding
  • Fully guarded on all grinding surfaces
  • Steel frame and platen provides heavy duty construction
$2,550.49
$2,079.00
  • Drill Diameter: 1/16” – 3/4”
  • Point Angle: 60 °- 170°
  • Power Supply: AC 110V 50/60Hz
  • RPM of Motor: 5300 RPM
  • Contact Wheel Size: 7" x 2"
  • Fixed Speed: 8000 SFPM
  • Adjustable Work Rest Included
  • Motor: 1 HP, 120V Single Phase
$1,957.00
$1,803.09
  • Constructed of metal for years of use
  • Helps to extended the service life of the air conditioning equipment in the shop
  • Filters dust, smoke and oil mist in a closed or air conditioned workshop
  • Fully enclosed ball bearing motor with overload protection for long, dependable service
  • Adjustable Exhaust directs the air where you want it for optimal circulation
$1,696.69
$1,429.00
  • Variable Speed: 250-2500 SFPM
  • Accepts up to 10" diameter wheels, 2" wide
  • 3/4” Arbor
  • Motor: 1.5 HP 120V Single Phase
$4,211.00
$3,780.06
  • CSA/CUS Certified
  • Industrial strength construction for demanding usage
  • Innovative safety guarding surrounding the sanding belt
  • Large Eye Safety Shields
  • Rubber sealed bearings for years of maintenance free sanding on idle wheel
  • Nameplate Output- 3
  • Number of Poles- 4
  • Voltage- 460 V or 230 V or 208 V
  • Factory connected for 230, manual starter, specify voltage when ordering
$6,397.00
$4,839.85
  • Variable Speed: 600-6000 SFPM
  • Contact Wheel Size: 5” x 2"
  • Throat Clearance: 7-1/2”
  • Motor: 1 HP 120V Single Phase
$3,308.00
$3,019.10
  • Center height: 7”
  • Grinding length: 39”
  • Grinding diameter: 0.3” - 12.6”
  • Motor rating - grinding spindle / hydraulic pump: 7.4 / 1 Hp
  • 40 Qt / 10 Gal / 1.3 cu ft Capacity
  • Variable Speed
  • Free Standing Floor Model with integrated timer
  • Motor: 1/2 HP 120V Single Phase
$4,258.00
$3,878.09
  • All-purpose- for wood, metal and plastics
  • 3450 RPM  motor, 3600 SFPM
  • 4″ x 36″ belt with full OSHA guard
  • Preset spring belt tension
  • Variable Speed: 800-8000 SFPM
  • Contact Wheel Size: 7" x 2.5"
  • Quick belt change
  • Motor: 1.5 HP 120V Single Phase
$3,915.00
$3,530.62
  • Variable Speed: 500-5300 SFPM
  • Contact Wheel Size: 7 x 2.5"
  • Pedestal Included
  • Motor: 1 HP 120V Single Phase
$5,355.00
$4,802.53
  • Includes 100 grit belt and 120 grit disc
  • Fits almost any bench grinder with a 1/2 or 5/8 shaft
  • Additional length with the 2x48 attachment
  • Offers increased belt wrap on the underside slack belt surface
$305.00
  • Fixed Speed: 6500 SFPM
  • Contact Wheel Size: 7 x 4"
  • Quick belt change
  • Motor: 2 HP 220V Single Phase
$4,276.00
$3,834.83
  • Abrasive belt unit removes material and finishes at the same time, allowing the operator to get into small openings, plus handle odd shapes and angles
  • Adjustable dust deflector and dust chute
  • Allows for sanding, grinding, or finishing of outside, curves or odd shaped work pieces on the belt
  • Cast iron construction
  • Deluxe miter gauge that turns and locks for common angles, 45° both left and right