Surface Grinders

  • Workpiece length (max.): 20”
  • Workpiece weight (max.): 22 lbs.
  • Grinding diameter: 7.9”
  • Grinding spindle speed: 2500 rpm
  • Air Bearing Stroke: 6.5”
  • Air Bearing Collet: Standard 5C
  • Cutting Tool Capacity: 2” shank, 9.8” O.D.
  • Flute Length: 10.5”
  • Type of Operation: Electric Reciprocation and Electric Crossfeed
  • Table/Cross Travel Max: 18” x 7”
  • Grinding Wheel Supplied: 7” x 1/2” x 1.25” hole
  • Spindle RPM: 3360
  • Center height: 5”
  • Workpiece length (max.): 26”
  • Grinding length: 20”
  • Grinding diameter: 0.3” - 7.9”
  • Air Bearing Stroke: 10.5”
  • Air Bearing Swing Over Table: 9.8”
  • Cutting Tool Capacity: 2” shank, 9.8” O.D.
  • Flute Length: 10.5”
  • Drill Diameter: 1/16” - 1-1/4”
  • Point Angle: 60 - 140°
  • Power Supply: AC 110V 50/60Hz
  • RPM of Motor: 5500 RPM
  • Grinding diameter: 1”
  • Speed: 5200 rpm
  • Collet chuck diameter: 0.7”
  • Travel tool holder: 6”
  • Type of Operation: Electric Reciprocation and Electric Crossfeed
  • Table/Cross Travel Max: 18” x 7”
  • Grinding Wheel Supplied: 7” x 1/2” x 1.25” hole
  • Spindle RPM: 3360
  • Center height: 5”
  • Grinding length: 31”
  • Grinding diameter: 0.3” - 7.9”
  • Inside grinding depth: 4.9”
  • Type of Operation: All Manual
  • Table/Cross Travel Max: 18” x 7”
  • Grinding Wheel Supplied: 7” x 1/2” – 1.25” hole
  • Spindle RPM: 3360
  • Type of Operation: Hydraulic Reciprocation, Electric Crossfeed
  • Table/Cross Travel Max: 24.8" x 12.6"
  • Grinding Wheel Supplied: 12" x 1-1/4" - 3" hole
  • Spindle RPM: 1680
  • Motor: ¾ HP Single Phase
  • RPM: 3600
  • Table Size: 6" x 12"
  • Wheel Size (Dia x W x Bore): 7" x 1/2" x 1-1/4"
  • Type of Operation: Hydraulic Reciprocation, Electric Crossfeed
  • Table/Cross Travel Max: 22" x 10.2"
  • Grinding Wheel Supplied: 8" x 3/4" -1.25" hole
  • Spindle RPM: 3360
  • Table dimensions: 8” x 18”
  • Spindle axis-to-table surface distance: 17.72”
  • Travel X-axis: 18.9”
  • Travel Y-axis: 9”
  • Air Bearing Stroke: 6.5”
  • Air Bearing Collet: Standard 5C
  • Cutting Tool Capacity: 2” shank, 9.8” O.D.
  • Flute Length: 10.5”
  • Swing Over Table: 10"
  • Distance Between Center: 27 1/2"
  • Grinding Wheel Spindle RPM: 2600, 3700, 6200 RPM
  • Voltage: 220/440V AC / 3PH
  • Type of Operation: Hydraulic Reciprocation, Electric Cross and Downfeed
  • Table/Cross Travel Max: 24.8" x 12.6"
  • Grinding Wheel Supplied: 12" x 1-1/4" - 3" hole
  • Spindle RPM: 1680
$33,990.00
$32,995.00
  • Drill Diameter: 1/16” – 3/4”
  • Point Angle: 60 °- 170°
  • Power Supply: AC 110V 50/60Hz
  • RPM of Motor: 5300 RPM
  • Center height: 7”
  • Grinding length: 39”
  • Grinding diameter: 0.3” - 12.6”
  • Motor rating - grinding spindle / hydraulic pump: 7.4 / 1 Hp
  • Workpiece weight (max.): 396 lbs.
  • Spindle nose-to-table surface distance: 18”
  • Travel X-axis: 22”
  • Travel Y-axis: 11”
  • Type of Operation: Hydraulic Reciprocation, Electric Crossfeed
  • Table/Cross Travel Max: 22" x 10.2"
  • Grinding Wheel Supplied: 8" x 3/4" -1.25" hole
  • Spindle RPM: 3360
  • Speed RPM: 1680 - 9120
  • Self-trimming cup wheel
  • Prismatic vise for centering and safe fixturing
  • Depth of the Cup Wheel: 22mm /.866"
$1,629.00
$1,585.00
  • Wheel Dia.: 14” x 1.5” x 5”
  • Wheel Speed: 1,620 rpm
  • Max Grinding: 8” Dia., 20” Length
  • Motor: 220V, 3 HP
  • Wheel Dia.: 14” x 1.5” x 5”
  • Wheel Speed: 1,620 rpm
  • Max Grinding: 8” Dia., 20” Length
  • Motor: 220V, 3 HP