Cuttermasters 110V 1/16” – 1-1/4” Full Range Drill Grinder DS-232

Description

This is Cuttermasters’ largest capacity drill sharpener, grinding drill points up to 1-1/4" and as small as 0.080". It is essentially their two popular grinders: the DS213 (up to 1/2") and the DS1332 (1/16" to 1-1/4") in one machine. The grinder comes complete with a full 32pc collet set with collet storage. Their drill grinders all feature easy operation (go from never-seen-a-drill to expert in under an hour) with perfect back split, center cutting geometry every time.

The DS232 Large Drill Sharpener provides a valuable return on investment to any shop with dull drill bits. Adding this sharpener to your shop will immediately decrease your spending on new tools. The DS232 Drill Sharpener is easy to use, has a small foot print and a heavy-duty construction for industrial tool sharpening. It allows you to create center cutting end geometry so that a pilot hole is not needed. The machine comes with a 200 grit wheel and collet set.

These drill grinders are not the look-alike grinders that can be found on eBay and Alibaba. Cuttermasters' grinders are tested in North America, CE approved, and covered by their manufacturer’s warrantee. The wheels are the bottom line. If the wheels are no good, the machine is no good. Cuttermasters’ wheels are produced using General Electric abrasive media under strict conditions to ensure long life and, in some cases, are designed by Cuttermasters in North America. Color may vary as they stock both in red and yellow.

Features

• Precision assurance within 0.02mm
• Creates center cutting geometry
• High accuracy balance of tip geometry
• Easy to operate, grinding tools within 1 minute
• High accuracy steel alloy collets
• High efficiency DC motor
• Industrial quality GE grinding wheel
• Portable
• Sharpens drills 2mm to 32mm (0.08” to 1-1/4”) diameter
• Creates 60° to 140° point angle
• Creates variable split point geometries
• Adjustable depth-of-cut for split point geometry
• Includes 32pc collet set

Specifications

• Drill Diameter: 1/16” - 1-1/4” (2-32mm)
• Point Angle: 60 - 140°
• Power Supply: AC 110V 50/60Hz
• RPM of Motor: 5500 RPM
• Grinding Motor: DS13-200, DS-C100
• Grinding Wheel: 200 grit
• Weight: 64 lbs. (29 kg)
• Machine size (L x W x H): 20” x 11” x 12” (50 x 29 x 31 cm)
• Type of Thinning: X Thinning
• Standard Accessories: Er20 and ER40 chuck and 31pc collet set

Options

• Diamond Wheel DS13-200D for carbide or CBN Wheel for steel
• 220V Power Supply