Grinding & Sanding

  • Belt Size: 25″ x 60″
  • Max Sanding Width: 24 3/4″
  • Max Sanding Height: 6”
  • Motor: 7.5HP, 220V, Single Phase
  • Center height: 5”
  • Grinding length: 31”
  • Grinding diameter: 0.3” - 7.9”
  • Inside grinding depth: 4.9”
  • Nameplate Output- 7.5
  • Number of Poles- 4
  • Voltage- 460 V or 230 V or 208 V
  • Factory connected for 230, magnetic starter must be changed for other voltages
$8,646.00
$6,628.99
  • 59" x 22" Downdraft Table
  • Dual Motors
  • 1790 CFM Per Motor
  • 110V
$4,542.86
$3,749.00
  • Contact Wheel Size: 7" x 2"
  • Fixed Speed: 8000 SFPM
  • Adjustable Work Rest Included
  • Motor: 1 HP, 120V Single Phase
$2,118.00
$1,937.08
  • Type of Operation: Hydraulic Reciprocation, Electric Cross and Downfeed
  • Table/Cross Travel Max: 24.8" x 12.6"
  • Grinding Wheel Supplied: 12" x 1-1/4" - 3" hole
  • Spindle RPM: 1680
$33,990.00
$32,995.00
  • Variable Speed: 600-6000 SFPM
  • Contact Wheel Size: 5” x 2"
  • Throat Clearance: 7-1/2”
  • Motor: 1 HP 120V Single Phase
$3,815.00
$3,451.97
  • Constructed of metal for years of use
  • Helps to extended the service life of the air conditioning equipment in the shop
  • Filters dust, smoke and oil mist in a closed or air conditioned workshop
  • Fully enclosed ball bearing motor with overload protection for long, dependable service
  • Adjustable Exhaust directs the air where you want it for optimal circulation
$2,248.57
$1,849.00
  • Variable Speed: 500-5300 SFPM
  • Contact Wheel Size: 7 x 4"
  • Pedestal Included
  • Motor: 1 HP 120V Single Phase
$6,698.00
$5,939.89
  • Type of Operation: Hydraulic Reciprocation, Electric Crossfeed
  • Table/Cross Travel Max: 22" x 10.2"
  • Grinding Wheel Supplied: 8" x 3/4" -1.25" hole
  • Spindle RPM: 3360
  • CSA/CUS Certified
  • Industrial strength construction for demanding usage
  • Innovative safety guarding surrounding the sanding belt
  • Large Eye Safety Shields
  • Rubber sealed bearings for years of maintenance free sanding on idle wheel
$1,141.03
$965.00
  • Air Bearing Stroke: 6.5”
  • Air Bearing Collet: Standard 5C
  • Cutting Tool Capacity: 2” shank, 9.8” O.D.
  • Flute Length: 10.5”
  • Swing Over Table: 10"
  • Distance Between Center: 27 1/2"
  • Grinding Wheel Spindle RPM: 2600, 3700, 6200 RPM
  • Voltage: 220/440V AC / 3PH
  • Type of Operation: Hydraulic Reciprocation, Electric Crossfeed
  • Table/Cross Travel Max: 24.8" x 12.6"
  • Grinding Wheel Supplied: 12" x 1-1/4" - 3" hole
  • Spindle RPM: 1680
  • Maximum Width: 36”
  • Brush: 9"-11" Typical Diameter
  • Speed: Ranged Variable, 400-1200 rpm Brush
  • Motor: 5 HP, 220 Volt, Single Phase
  • Fixed Speed: 8000 SFPM
  • Contact Wheel Size: 7” x 2"
  • Throat Clearance: 8-7/8”
  • Motor: 1.5 HP 120V Single Phase
$3,032.00
$2,792.13
  • Mount to your bench, fixture
  • One knob tracking, sanding belt is spring tensioned
  • V belt drive
  • Wt: 115 lbs
$1,190.00
$1,150.00
  • 9" aluminum disc reduces heat buildup and prolongs abrasive life
  • Cast iron work rests with tool-less adjustments
  • Contact wheel grinding with toolless access
  • Easy-to-use belt tracking.
  • Full guarding of all non-work contact points
$1,276.23
$1,099.00
  • Variable Speed: 220-2200 RPM
  • Accepts up to 12" diameter wheels, 2" wide
  • 3/4” Arbor
  • Motor: 2 HP 220V Single Phase
$5,398.00
$4,876.40
  • 9" aluminum disc reduces heat buildup and prolongs abrasive life
  • Cast iron work rests with tool-less adjustments
  • Contact wheel grinding with toolless access
  • Easy-to-use belt tracking.
  • Full guarding of all non-work contact points
$1,124.69
$960.00
  • Type of Operation: Hydraulic Reciprocation, Electric Crossfeed
  • Table/Cross Travel Max: 24.8" x 12.6"
  • Grinding Wheel Supplied: 12" x 1-1/4" - 3" hole
  • Spindle RPM: 1680
  • This model includes the vacuum base dust collector
  • Quick change belt, pre-tensioned one lever belt change
  • 100% Made in USA!
  • Multi-position horizontal/vertical
  • Nameplate Output- 3
  • Number of Poles- 4
  • Voltage- 460 V or 230 V or 208 V
  • Factory connected for 230, manual starter, specify voltage when ordering
$6,397.00
$4,839.86
  • Variable Speed: 550-5500 SFPM
  • Contact Wheel Size: 1” x 2"
  • Manual Spring Tension Quick Change Assembly
  • Motor: 1.5 HP 120V Single Phase
$4,528.00
$4,052.81