Grinding & Sanding

  • Nameplate Output- .5
  • Number of Poles- 2
  • Voltage- 115 V
  • Factory connected for 115 volts, power cord supplied
$2,928.00
$2,298.57
  • Speed RPM: 1680 - 9120
  • Self-trimming cup wheel
  • Prismatic vise for centering and safe fixturing
  • Depth of the Cup Wheel: 22mm /.866"
  • Adjustable Tool Rest
  • Cast iron wheel guard
  • Cast iron wheel guards and dust vents
  • Fine and coarse vitrified grinding wheels
  • Fine and coarse vitrified grinding wheels included
$321.43
$280.00
  • Fixed Speed: 5000 SFPM
  • Contact Wheel Size: 7 x 2.5"
  • Pedestal Included
  • Motor: 1 HP 120V Single Phase
$4,498.00
$4,021.91
  • 2 x 2"x48" Belt Sanders
  • Combination Sander
  • Vertical or Horizontal Position
  • 1/2 HP
  • Frequency: 60 Hz
  • Nameplate Output: 0.33/0.17
  • Shaft Diameter/Taper: 0.375”/0.25”
  • Speed: 1725 rpm/3450 rpm
$2,570.00
$1,892.86
  • 1/3 HP motor
  • 1" x 42" belt 
  • Tilt table - vertical sander only 
  • 35 lbs
  • Favorite among knife makers and blade sharpeners
  • Allows for additional belt cooling over traditional machines
  • Quick change belt system
  • Fits almost any bench grinder with a 1/2 or 5/8 shaft
$387.00
  • Nameplate Output- 1.5
  • Number of Poles- 2
  • Voltage- 230 V or 115 V
  • Factory connected for 115 volts, power cord supplied
$3,539.00
$2,652.28
  • Frequency: 50.00 Hz/60.00 Hz
  • Shaft Diameter: 0.75”
  • Speed: 3000 rpm/3600 rpm
  • Wheel Bore Size: 1.25”
$3,294.00
$2,557.18
  • Fixed Speed: 8000 SFPM
  • Contact Wheel Size: 7 x 2.5"
  • Quick belt change
  • Motor: 1.5 HP 120V Single Phase
$3,059.00
$2,809.27
  • All-purpose- for wood, metal and plastics
  • Vertical or Horizontal position, 4″ x6″ cast iron platen
  • pre-set spring belt tension
  • Dimensions: W18″ x H17″ x D 7″
  • Adjustable Tool Rest
  • Cast iron wheel guard
  • Cast iron wheel guards and dust vents
  • Fine and coarse vitrified grinding wheels
  • Fine and coarse vitrified grinding wheels included
  • Nameplate Output- .75
  • Number of Poles- 2
  • Voltage- 230 V or 115 V
  • Comes with 36 and 0.014 wire wheel, connected for 115 volts power cord included
$2,156.00
$1,684.95
  • 4HP Motor 
  • 6691 fpm Belt Speed
  • Pneumatic / Manual Power 
  • Contact Wheel DiaxWidth 7.87"x3"
$3,500.00
$2,849.00
  • Comes with 100 grit belt and 120 grit disc
  • Fits almost any bench grinder with a 1/2 or 5/8 shaft
  • Extra-long and wide precision top platen
  • Increased belt wrap on the underside slack belt surface
$397.00
  • CSA/CUS Certified
  • Industrial strength construction for demanding usage
  • Innovative safety guarding surrounding the sanding belt
  • Large Eye Safety Shields
  • Rubber sealed bearings for years of maintenance free sanding on idle wheel
  • Adjustable Tool Rest
  • Cast iron wheel guard
  • Cast iron wheel guards and dust vents
  • Fine and coarse vitrified grinding wheels
  • Fine and coarse vitrified grinding wheels included
$432.00
  • Type of Operation: All Manual
  • Table/Cross Travel Max: 18” x 7”
  • Grinding Wheel Supplied: 7” x 1/2” – 1.25” hole
  • Spindle RPM: 3360
  • Center height: 7”
  • Grinding length: 59”
  • Grinding diameter: 0.3” - 12.6”
  • Motor rating - grinding spindle / hydraulic pump: 4 / 0.6 Hp
  • Stand Not Included 
  • 3hp, 1 phase, 220 volt
  • Reversible platen 6 1/2″ x 14″
  • 3 HP motor 3450 RPM, 1 phase, manual switch, 3500 SFPM
$2,395.00
$2,253.00
  • Adjustable Dust port with high dust collection efficiency and drive sparks away from the Operator
  • Aluminum casted drive wheel for years of use
  • Flat and Angular Stock: Platen setting is the perfect angle for high speed, precision flat and level grinding
  • Fully guarded on all grinding surfaces
  • Steel frame and platen provides heavy duty construction
$2,947.14
$2,399.00
  • Wheel Center Height: 5.5"
  • Wheel Guard: 6"
  • Wheel Speed: 600-5000 RPM
  • Shaft: Single
  • 2.5 Cubic Feet Capacity
  • Motor: 1-1/2 HP 120V Single Phase
  • Max Length Part: 19”
  • Quiet performance
$7,090.00
$6,533.15