Belt & Disc

  • Fixed Speed: 2200 RPM
  • Accepts up to 12" diameter wheels, 2" wide
  • 3/4” Arbor
  • Motor: 1.5 HP 120V Single Phase
MSRP: $4,532
$4,129.39
As low as $134.20/mo

  • Adjustable dust collector and dust chute
  • Belt head adjusts vertically and horizontally
  • Belt operates at any angle
  • Completely enclosed drums and guarded sanding belt
  • Fully machined, balanced disc
MSRP: $3,128.50
$2,545
As low as $82.71/mo

  • Abrasive belt unit removes material and finishes at the same time, allowing the operator to get into small openings, plus handle odd shapes and angles
  • Adjustable dust deflector and dust chute
  • Allows for sanding, grinding, or finishing of outside, curves or odd shaped work pieces on the belt
  • Cast iron construction
  • Deluxe miter gauge that turns and locks for common angles, 45° both left and right
MSRP: $905.40
$819.50
As low as $26.63/mo

  • 2" x 72" Belt
  • USA Made
  • Easy Belt Tracking
  • Open area design for easy access
MSRP: $2,250
$2,142
As low as $69.61/mo

  • Wire Wheel: 10" Diameter, 1.75" Wide
  • Two Speed Motor: 4HP, 2800/3300 RPM
  • Wiring: 3 Phase, 400V, 50hz
  • Outlet to capture dust and debris
$2,950
As low as $95.87/mo

  • CSA/CUS Certified
  • Industrial strength construction for demanding usage
  • Innovative safety guarding surrounding the sanding belt
  • Large Eye Safety Shields
  • Rubber sealed bearings for years of maintenance free sanding on idle wheel
MSRP: $1,527.12
$1,291
As low as $41.95/mo

  • 3"x132" Dual Wheel Grinder
  • 10HP 3Phase 220 or 440Volt
  • Made in USA
  • Parts Table Included
MSRP: $21,000
$20,557
As low as $406.82/mo

  • 3 extra 80 grit Silicon Carbide belts included
  • 3" Round connector and hose clamp for ease of mounting to a metalworking dust collection system
  • Advanced belt tracking with vented front wheel fixed in place for rigidity when grinding on the wheel radius
  • Fully assembled for immediate use
  • Hinged top cover opens for access to grind large pieces using the entire length of the belt
MSRP: $3,621.85
$2,915
As low as $94.73/mo

  • 4HP Motor 
  • 6691 fpm Belt Speed
  • Pneumatic / Manual Power 
  • Contact Wheel DiaxWidth 7.87"x3"
MSRP: $4,270.52
$3,475
As low as $112.93/mo

  • Contact Wheel Size: 3” x 8”
  • Belt Speed: 6000 fpm
  • Grinding Plate: 3” x 21”
  • Work Height: 22”-48”
$2,007.50
As low as $65.24/mo

  • Motor: 3 HP, 220V, 3 Phase
  • Surface Belt Speed: 7000 ft/min
  • Adjustable Grind Height
  • Grinds Off Bolts and Rivets
$2,480
As low as $80.60/mo

  • Nameplate Output- 1.5
  • Number of Poles- 2
  • Voltage- 230 V or 115 V
  • Factory connected for 115 volts, power cord supplied
MSRP: $3,539
$3,085.97
As low as $100.29/mo

  • Grinder 1PH amp draws: 5.9 amps
  • Vacuum 1PH FLA: 5.9 amps
  • SFPM: 5400
  • 3″ and 1.5″ serrated contact wheels on rotating platen
MSRP: $4,450
$4,270
As low as $138.77/mo

  • Fixed Speed: 8000 SFPM
  • Contact Wheel Size: 7 x 2.5"
  • Quick belt change
  • Motor: 3 HP 440V Three Phase
MSRP: $4,777
$4,274.47
As low as $138.92/mo

  • Variable Speed: 800-8000 SFPM
  • Contact Wheel Size: 7” x 1.5"
  • Throat Clearance: 8-7/8”
  • Motor: 1.5 HP 120V Single Phase
MSRP: $4,049
$3,665.09
As low as $119.11/mo

  • Frequency: 60 Hz
  • Nameplate Output: 0.33/0.17
  • Shaft Diameter/Taper: 0.375”/0.25”
  • Speed: 1725 rpm/3450 rpm
MSRP: $2,570
$2,202.38
As low as $71.57/mo

  • Variable Speed: 410-4140 RPM
  • 5/8” Arbor Thread
  • Quick wheel change
  • Motor: 1.5 HP 120V Single Phase
MSRP: $2,967
$2,660.19
As low as $86.45/mo

  • Variable Speed: 530-5300 SFPM
  • Contact Wheel Size: 4-3/4” x 1"
  • Throat Clearance: 5-1/2”
  • Motor: 3/4 HP 120V Single Phase
MSRP: $3,510
$3,106.56
As low as $100.96/mo

  • Operate in a horizontal or vertical position
  • 1 HP 120v Motor
  • Comes with MT362 2x36 attachment
  • Quick change belt system
$645
As low as $20.96/mo

  • 3 extra 80 grit Silicon Carbide belts included
  • 3" Round connector and hose clamp for ease of mounting to a metalworking dust collection system
  • Advanced belt tracking with vented front wheel fixed in place for rigidity when grinding on the wheel radius
  • Fully assembled for immediate use
  • Hinged top cover opens for access to grind large pieces using the entire length of the belt
MSRP: $3,621.85
$2,925
As low as $95.06/mo

  • Nameplate Output- 2
  • Number of Poles- 4
  • Voltage- 230 V or 115 V
  • Factory connected for 115 volts, no power cord 
MSRP: $6,543
$5,790.91
As low as $188.20/mo

  • Variable Speed: 410-4140 RPM
  • 5/8” Arbor Thread
  • Quick wheel change
  • Motor: 3/4 HP 120V Single Phase
MSRP: $2,210
$2,006.34
As low as $65.20/mo

  • Voltage: 220V 60hz 1PH
  • Belt Size: 3” x 79”
  • Wheel Diameter: 7” Drive Wheel, 4” Contact Wheel
  • Belt Speed: 5018 fpm
$1,175
As low as $38.18/mo