Belt & Disc

  • 10" Disc Sander
  • Vacuum Included
  • 1/2 HP Motor
  • Made in the USA
$1,470
As low as $47.77/mo
  • 3" Belt Width
  • Adjustable Angle Floor Stand
  • Top Platen for Flat Work Grinding and Small Parts
  • Adjustable Work Rest with Face Shield
$1,835
As low as $59.63/mo
  • Fixed Speed: 6500 SFPM
  • Contact Wheel Size: 7 x 4"
  • Motor: 3 HP 440V Three Phase
  • Includes Magnetic Starter
MSRP: $5,295
$4,711.01
As low as $153.10/mo
  • Abrasive belt unit removes material and finishes at the same time, allowing the operator to get into small openings, plus handle odd shapes and angles
  • Adjustable dust deflector and dust chute
  • Cast iron construction
  • Deluxe miter gauge that turns and locks for common angles, 45° both left and right
  • Heavy-duty steel base and rubber feet
MSRP: $858.10
$771
As low as $25.05/mo
  • Adjustable Dust port with high dust collection efficiency and drive sparks away from the Operator
  • Aluminum casted drive wheel for years of use
  • Flat and Angular Stock: Platen setting is the perfect angle for high speed, precision flat and level grinding
  • Fully guarded on all grinding surfaces
  • Steel frame and platen provides heavy duty construction
MSRP: $3,540.67
$2,855
As low as $92.78/mo
  • Nameplate Output- .5
  • Number of Poles- 2
  • Voltage- 115 V
  • Factory connected for 115 volts, power cord supplied
MSRP: $3,294
$2,975.33
As low as $96.69/mo
  • CSA/CUS Certified
  • Heavy Cast Iron Bases
  • Oversized motor shafts, heavy retainer plates and massive lock nuts.
  • Safety switch with removable key
  • The wide range of spacer options allow you to run a huge variety of finishing wheels.
MSRP: $959.52
$863
As low as $28.04/mo
  • Motor: 3/4 HP
  • Belt Size: 2 x 48 in
  • Work Table Surface: 4-1/4 x 3 in
  • Full belt guard
  • Operate in a horizontal or vertical position
  • 1 HP 120v Motor
  • Comes with 8CW 2x48 attachment
  • Quick change belt system
$815
As low as $26.48/mo
  • Nameplate Output- 1
  • Number of Poles- 4
  • Voltage- 230 V or 115 V
  • Factory connected for 115 volts, no power cord
MSRP: $2,041
$1,845.46
As low as $59.97/mo
  • Frequency: 50.00 Hz/60.00 Hz
  • Shaft Diameter: 0.75”
  • Speed: 3000 rpm/3600 rpm
  • Wheel Bore Size: 1.25”
MSRP: $3,294
$2,975.33
As low as $96.69/mo
  • Shaft Diameter: 0.75”
  • Speed: 3000 rpm/3600 rpm
  • Wheel Diameter: 6”
  • Wheel Bore Size: 1.25”
MSRP: $2,928
$2,674.42
As low as $86.91/mo
  • Volts: 115/230V
  • Amps AC: 12.5/6.25
  • Disc Speed: 1720 RPM
  • Belt SFPM: 2258 SFPM
MSRP: $2,800
$2,649
As low as $86.09/mo
  • Fixed Speed: 7200 SFPM
  • Contact Wheel Size: 8” x 3"
  • Adjustable Work Rest
  • Motor: 3 HP 440V Three Phase
MSRP: $7,588
$6,916.41
As low as $224.78/mo
  • Volts: 115/230V
  • Amps AC: 12.6/6.3
  • Belt SFPM: 2258
  • Dust Chute Size: 4 in
$1,789
As low as $58.14/mo
  • Fixed Speed: 5500 SFPM
  • Contact Wheel Size: 1” x 2"
  • Manual Spring Tension Quick Change Assembly
  • Motor: 1.5 HP 120V Single Phase
MSRP: $4,132
$3,730.97
As low as $121.25/mo
  • 10″x90″ belt, 3400 SFPM
  • 10HP, 3phase, TEFC motor. Magnetic controls with jog switch
  • Table Tilt 45 deg. down, 15 deg. up
  • Dimensions: L46″ x W30″ x H35″
$12,194
As low as $396.30/mo
  • Fixed Speed: 4140 RPM
  • 5/8” Arbor Thread
  • Quick wheel change
  • Motor: 3/4 HP 120V Single Phase
MSRP: $1,375
$1,228.88
As low as $39.93/mo
  • Fixed Speed: 4140 RPM
  • 5/8” Arbor Thread
  • Quick wheel change
  • Motor: 1.5 HP 120V Single Phase
MSRP: $1,817
$1,675.15
As low as $54.44/mo
  • 10″ disc sander with 4″ x 36″ belt sander
  • With full boxed OSHA guard, Horizontal or vertical belt position
  • 1/2 HP 1PH TEFC motor , 115 volts, 1 ph, 7.4 amps, 230 volt, 1 ph, 3.7 amps
  • Factory wired at 115 volt, 1 phase, 8 ft. 3 prong plug standard
$1,449
As low as $47.09/mo
  • Grinder 3PH amps draws: 2.8 amps
  • Vacuum 3PH FLA: 2.8 amps
  • SFPM: 5400
  • 3″ and 1.5″ serrated contact wheels on rotating platen
MSRP: $4,450
$4,270
As low as $138.77/mo
  • CSA/CUS Certified
  • Heavy Cast Iron Bases
  • Oversized motor shafts, heavy retainer plates and massive lock nuts.
  • Safety switch with removable key
  • The wide range of spacer options allow you to run a huge variety of finishing wheels.
$537
As low as $17.45/mo
  • Shaft Diameter: 5/8"
  • Dust Collection: Integrated dust chute
  • Grit: 36 & 60
  • Wheel Size: 8" x 1" x 5/8" - Aluminum Oxide
MSRP: $743.26
$669
As low as $21.74/mo
  • Grinder amp draws: 3PH 230V 11.8 amps
  • Dust collector amp draws: 3PH 230V 2.8 amps
  • Belt speed: 6900 SFPM
  • Grinder switch: Magnetic on/off switch
MSRP: $6,700
$6,303
As low as $204.84/mo