Weldsale

  • Layout
Weldsale 9" Envelope Vertical Clamp WSC-16134 at Elite Metal Tools
Weldsale 9" Envelope Vertical Clamp WSC-16134
  • Vertical Clamp with 0 – 9 inch clamping envelope and 4-1/2 inch throat. Simply drop the Round Knurled boot into a Weldsale 1-3/4″ square hole, tilt the clamp back, slide the arm down until the swivel pads contacts your work piece, and turn the screw.
$189
View Details
Weldsale Magnetic V-Block WSC-223 at Elite Metal Tools
Weldsale Magnetic V-Block WSC-223
  • Magnetic holding device with On/Off Switch and V-Groove on top surface. Magnetic force works on all 6 sides. Excellent for holding Pipe, Angle, Tube, and Plate. Precision machined surfaces.
$408.83
View Details
Weldsale Horizontal Clamp WSC-18134 at Elite Metal Tools
Weldsale Horizontal Clamp WSC-18134
  • Horizontal Clamp. Round Knurled boot fits typical Weldsale 1-3/4″ square hole. Clamping HEIGHT of 2 inch (with sliding arm reversed) to 15 inch. Throw of screw: 3-1/2 inch.
$249
View Details
Weldsale Adjustable Angle Magnet WSC-22 at Elite Metal Tools
Weldsale Adjustable Angle Magnet WSC-22
  • Magnetic holding device that is adjustable from 45 degree to 90 degree. Built in scale. Can function as a “third hand” so Weldor can work alone. Magnet has approximately 100 lbs of holding force. NOT FOR LIFTING!
$570.77
As low as $18.55/mo
View Details
Weldsale 90 Degree Inside Angle Magnet WSC-20 at Elite Metal Tools
Weldsale 90 Degree Inside Angle Magnet WSC-20
  • Magnetic holding device with fixed 90 degree Inside Corner. Clamp and align in one step.
  • Can function as “third hand” so Welder can work alone.
$459.78
View Details
Weldsale 20" Long Reach Vertical Clamp WSC-1613420LR at Elite Metal Tools
Weldsale 20" Long Reach Vertical Clamp WSC-1613420LR
  • Vertical Clamp with 0 – 20 inch clamping envelope and “long Reach” 7-3/4 inch throat. Fast acting 20 Inch vertical clamp with a long reach
$271.99
View Details
Weldsale 90 Degree Outside Angle Magnet WSC-21 at Elite Metal Tools
Weldsale 90 Degree Outside Angle Magnet WSC-21
  • Magnetic holding device with fixed 90 degree Outside Corner. Clamp and align in one step. Can function as a “third hand” so Weldor can work alone.
$453.75
View Details
Weldsale Vise WSC-38 at Elite Metal Tools
Weldsale Vise WSC-38
  • Bench Vise for use on all Weldsale Platens. Includes our WSPLATE, Connector Plate, and all hardware needed to attach Vise to Weldsale Platen.
$449
View Details
Weldsale Long Reach Vertical Pipe Clamp WSC-26134LR at Elite Metal Tools
Weldsale Long Reach Vertical Pipe Clamp WSC-26134LR
  • Vertical Pipe Clamp, fast action, with V-Groove Swivel Pad. Will securely hold pipe, curved, narrow or flat items. Clamping envelope 0 – 20 inches, 4-1/2 inch throat. Clamp fits Weldsale Platens with typical 1-3/4 in. square holes.
$226.70
View Details
Weldsale Long Reach Vertical Clamp WSC-16134LR at Elite Metal Tools
Weldsale Long Reach Vertical Clamp WSC-16134LR
  • Vertical Clamp with 0 – 9 inch clamping envelope and “Long Reach” 7-3/4 inch throat. Simply drop the Round Knurled boot into a Weldsale 1-3/4″ square hole, tilt it back, slide the arm down until swivel pad contacts your work piece, and turn the screw.
$204.70
View Details
Weldsale 20" Vertical Pipe Clamp WSC-2613420 at Elite Metal Tools
Weldsale 20" Vertical Pipe Clamp WSC-2613420
  • Vertical Pipe Clamp, fast action, with V-Groove Swivel Pad. Will securely hold pipe, curved, narrow, or flat items.
  • This clamp has 0 – 20 inch clamping envelope and 4-1/2 inch throat.
$252.66
View Details
Weldsale Horizontal Bolt Down Clamp with 360 Degree Clamping Radius WSC-5BD at Elite Metal Tools
Weldsale Horizontal Bolt Down Clamp with 360 Degree Clamping Radius WSC-5BD
  • BOLT Down Horizontal Clamp, 360 degree clamping radius. Simply bolt this down, turn it to the desired radius or direction for clamping and tighten nut. Clamp has a 4-1/2 inch throw.
$159.75
View Details
Weldsale Horizontal Pipe Clamp WSC-28134 at Elite Metal Tools
Weldsale Horizontal Pipe Clamp WSC-28134
  • Horizontal Pipe Clamp, fast action, with V-Groove Pad. In HORIZONTAL position, will securely hold pipe, curved, narrow, or flat items. Clamping height 2 inch (with arm reversed) to 13″. Throw of screw: 3-1/2 inches.
$279
View Details
Weldsale 20" Long Reach Vertical Pipe Clamp WSC-2613420LR at Elite Metal Tools
Weldsale 20" Long Reach Vertical Pipe Clamp WSC-2613420LR
  • Vertical Pipe Clamp, fast action, with V-Groove Swivel Pad. Will securely hold pipe, curved, narrow or flat items. Clamping envelope 0 – 20 inches with “Long Reach” 7-3/4 inch throat. Clamp fits Weldsale Platens with typical 1-3/4 in. square holes.
$263.66
View Details
Weldsale 20" Vertical Clamp WSC-1613420 at Elite Metal Tools
Weldsale 20" Vertical Clamp WSC-1613420
  • Vertical Clamp with 0 – 20 inch clamping envelope and 4-1/2 inch throat. Simply drop the Round Knurled boot into a Weldsale 1-3/4″ square hole, tilt the clamp back, slide the arm down until the swivel pads contacts your work piece, and turn the screw.
$230.66
View Details
Weldsale Fixed Magnetic Angle On/Off Switch WSC-214 at Elite Metal Tools
Weldsale Fixed Magnetic Angle On/Off Switch WSC-214
  • Magnetic Square with On/Off Switch. A heavy duty Inside Angle magnet with two independent On/Off Switches to control the magnetic power. Holding force of approximately 50 lbs on each face.
$283.80
View Details
Weldsale 90 Degree Horizontal Clamp WSC-5A at Elite Metal Tools
Weldsale 90 Degree Horizontal Clamp WSC-5A
  • The WSC-5A is a Clamp created to clamp horizontally across the Platen Surface.
  • This will clamp at a 90˚ angle relative to the sides, and rows, of square holes.
$156.75
View Details
Weldsale 28" Envelope Long Reach Bolt Down Vertical Clamp WSC-1713428LR at Elite Metal Tools
Weldsale 28" Envelope Long Reach Bolt Down Vertical Clamp WSC-1713428LR
  • BOLT Down Vertical Clamp with 0 – 28 inch clamping envelope and “Long Reach” 7-3/4″ throat. Bolt Down Boot securely bolts this clamp to a Weldsale Platen. (will ONLY bolt to used WELDSALE Platens, NOT Generic Used Platens.)
$316.69
View Details
Weldsale Adjust-O Angle Magnet On/Off Switch WSC-215 at Elite Metal Tools
Weldsale Adjust-O Angle Magnet On/Off Switch WSC-215
  • Magnetic Square with On/Off Switch. A heavy duty Inside Angle ADJUSTABLE magnet with two independent On/Off Switches to control the magnetic power. Holding force of approximately 50 lbs on each face.
$319.77
View Details
Weldsale Vertical Pipe Clamp WSC-26134 at Elite Metal Tools
Weldsale Vertical Pipe Clamp WSC-26134
  • Vertical Pipe Clamp, fast action, with V-Groove Swivel Pad. Will securely hold pipe, curved, narrow or flat items. Clamping envelope 0 – 9 inches, 4-1/2 inch throat. Clamp fits Weldsale Platens with typical 1-3/4 in. square holes.
$215.70
View Details
Weldsale 28" Envelope Bolt Down Vertical Clamp WSC-1713428 at Elite Metal Tools
Weldsale 28" Envelope Bolt Down Vertical Clamp WSC-1713428
  • BOLT Down Vertical Clamp with 0 – 28 inch clamping envelope and 4-1/2″ throat. Bolt Down Boot securely bolts this clamp to a Weldsale Platen. (will ONLY bolt to used WELDSALE Platens, NOT Generic Used Platens.)
$305.69
View Details
Weldsale 16" Envelope Long Reach Bolt Down Vertical Clamp WSC-1713416LR at Elite Metal Tools
Weldsale 16" Envelope Long Reach Bolt Down Vertical Clamp WSC-1713416LR
  • BOLT Down Vertical Clamp with 0 – 16 inch clamping envelope and “Long Reach” 7-3/4 inch throat. Bolt Down Boot securely bolts this clamp to a Weldsale Platen. (will ONLY bolt to used WELDSALE Platens, NOT Generic Used Platens.)
$305.69
View Details
Weldsale Long Reach Bolt Down Vertical Clamp WSC-17134LR at Elite Metal Tools
Weldsale Long Reach Bolt Down Vertical Clamp WSC-17134LR
  • BOLT Down Vertical Clamp with 0 – 5 inch clamping envelope and “Long Reach” 7-3/4″ throat. Bolt Down Boot securely bolts this clamp to a Weldsale Platen. (will ONLY bolt to used WELDSALE Platens, NOT Generic Used Platens.)
$276.76
View Details
Weldsale 16" Envelope Bolt Down Vertical Clamp WS1713416 at Elite Metal Tools
Weldsale 16" Envelope Bolt Down Vertical Clamp WS1713416
  • BOLT Down Vertical Clamp with 0 – 16 inch clamping envelope and 4-1/2″ throat. Bolt Down Boot securely bolts this clamp to a Weldsale Platen. (will ONLY bolt to used WELDSALE Platens, NOT Generic Used Platens.)
$294.69
View Details

Founded in 1962 and since then has been a family owned and operated company. Weldsale is located in Philadelphia, PA. They made their designs in order to help their customers get their work done more efficiently and quicker. They offer a wide variety of products for your welding needs such as welding platons, layout tables, and welding benches. 

If you are interested in welding tables or anything else Weldsale has to offer, please contact us. Elite Metal Tools offers low prices and high quality customer service.