Category
Country of Origin

Cantek

Cantek 10HP 460V 18” Pneumatic Cut-Off Saw with Foot Pedal Control (LH or RH) PCS18 at Elite Metal Tools
Cantek 10HP 460V 18” Pneumatic Cut-Off Saw with Foot Pedal Control (LH or RH) PCS18
  • Cutting Capacity (Thickness x Width): 2″ x 12″, 3″ x 11″, 4″ x 10″
  • Cycle Speed: 45 strokes/min
  • Cycle Operation: Air
  • Saw Blade Size (Optional): 18″
$8,610
As low as $279.82/mo
View Details
Cantek 12” 230V Glue Line Ripsaw C12RSH at Elite Metal Tools
Cantek 12” 230V Glue Line Ripsaw C12RSH
  • Feed speeds variable: 50 to 120 FPM
  • Maximum workpiece thickness: 3.35″
  • Minimum workpiece length: 8″
  • Table size: 39″ x 57″
$22,050
As low as $436.36/mo
View Details
Cantek 9” x 138” Oscillating Edge Sander PW-120E at Elite Metal Tools
Cantek 9” x 138” Oscillating Edge Sander PW-120E
  • Working Capacity (LxH) 47” x 8”
  • Belt Size (LxH) 138 ½” x 9”
  • Sanding Belt Speed 1080 m/min (3544 FPM)
  • Motor 3HP: 230-volt 3 phase
$8,610
As low as $279.82/mo
View Details
Cantek 15HP 460V 24” Pneumatic Cut-Off Saw with Foot Pedal Control (LH or RH) PCS24 at Elite Metal Tools
Cantek 15HP 460V 24” Pneumatic Cut-Off Saw with Foot Pedal Control (LH or RH) PCS24
  • Cutting Capacity (Thickness x Width): 2″x21″, 4″x19″, 6″x15″, 7″x8″
  • Cycle Speed: 40 strokes/min
  • Cycle Operation: Air / mechanical
  • Saw Blade Size: 24″ max. (20″ min.)
$15,645
As low as $309.61/mo
View Details
Cantek 37” Bandsaw Resaw 10 HP Three Phase Motor HB-950A at Elite Metal Tools
Cantek 37” Bandsaw Resaw 10 HP Three Phase Motor HB-950A
  • Saw Wheel Diameter: 37″
  • Table size: 45-1/4” x 31-1/2″
  • Throat Capacity: 36-1/2″
  • Motor: 10 HP
$16,380
As low as $324.16/mo
View Details
Cantek 5 HP Three Phase 20” Planer with Spiral Cutterhead P20HV at Elite Metal Tools
Cantek 5 HP Three Phase 20” Planer with Spiral Cutterhead P20HV
  • Max. width: 20"
  • Max. thickness: 8-5/8"
  • Feed speed: 20 & 30 FPM
  • Main motor: 5 HP
$9,135
As low as $296.88/mo
View Details
Cantek 230V Three Phase 43” Wide Belt Sander with 20HP Motor and 60” Belt C431 at Elite Metal Tools
Cantek 230V Three Phase 43” Wide Belt Sander with 20HP Motor and 60” Belt C431
  • Abrasive belt size: 44” x 60”
  • Max width stock: 43”
  • Max thickness opening: 5.9”
  • Feed speed (variable): 13 to 52 FPM
$27,930
As low as $552.73/mo
View Details
Cantek 60 HP 230V Multi Ripsaw MRS-12 at Elite Metal Tools
Cantek 60 HP 230V Multi Ripsaw MRS-12
  • Saw Motor: 60 HP 230 volt
  • Feed Speeds: 25 – 100 FPM
  • Table Size: 30” x 60″
  • Table Height from floor: 33.5″
$49,770
As low as $984.94/mo
View Details
Cantek 5HP 230V Single Phase 12” Tilt Arbor Table Saw TA12 at Elite Metal Tools
Cantek 5HP 230V Single Phase 12” Tilt Arbor Table Saw TA12
  • Max. depth of cut at 90°: 4″
  • Max. depth of cut at 45°: 2 3/4″
  • Table size: 48″x30″
  • Electrics: 230/1/60
$4,095
As low as $133.08/mo
View Details
Cantek 10HP Three Phase 14” Tilt Arbor Table Saw TA1214 at Elite Metal Tools
Cantek 10HP Three Phase 14” Tilt Arbor Table Saw TA1214
  • Max. depth of cut at 90°: 5″
  • Max. depth of cut at 45°: 3 1/2″
  • Table size: 48″x 38″
  • Table height: 34 1/4″
$5,880
As low as $191.10/mo
View Details
Cantek Pneumatic 21 Spindle Line Boring Machine JB-21P at Elite Metal Tools
Cantek Pneumatic 21 Spindle Line Boring Machine JB-21P
  • 21 spindles driven by steel gears
  • Table size: 43 5/16” x 15 ¾”
  • Motor: 2 HP
  • Distance between spindles: 32mm
$7,875
As low as $255.93/mo
View Details
Cantek 1HP Three Phase Automatic Edgebander MX370M (3PH) at Elite Metal Tools
Cantek 1HP Three Phase Automatic Edgebander MX370M (3PH)
  • Panel Thickness: 0.472 -1.77”
  • Edge Thickness: 0.0158”-0.118”
  • Feeding Speed: 23 FPM (7 m/min.)
  • Feed Motor: 1 HP
$32,655
As low as $646.24/mo
View Details
Cantek 7.5HP Spindle Shaper with Sliding Table SS512CSB at Elite Metal Tools
Cantek 7.5HP Spindle Shaper with Sliding Table SS512CSB
  • Table Size: 31.5” x 39.4″
  • Spindle Speeds (5): 3000/4000/6000/8000/10000 RPM
  • Spindle Taper: 5 MT
  • Spindle Diameter: 1.25”
$11,970
As low as $389.02/mo
View Details
Cantek 20HP 230V 36” Pneumatic Cut-Off Saw with Foot Pedal (LH or RH) PCS36 at Elite Metal Tools
Cantek 20HP 230V 36” Pneumatic Cut-Off Saw with Foot Pedal (LH or RH) PCS36
  • Cutting Capacity (Thickness x Width): 2″x33″, 4″x31″, 6″x29″, 8”x25”, 10”x20”, 12”x12”
  • Cycle Speed: 10-15 strokes/min
  • Cycle Operation: Pneumatic
  • Saw Blade Size: 36”
$30,240
As low as $598.44/mo
View Details
Cantek 3HP 230V 2.25” Drawer Notcher JEN60 at Elite Metal Tools
Cantek 3HP 230V 2.25” Drawer Notcher JEN60
  • Notch Dimensions: 2.25” x 0.5” high
  • Cutter Diameter: 10”
  • Drill Diameter: 0.25”
  • Table Size: 49” x 22”
$10,395
As low as $337.83/mo
View Details
Cantek 15HP 230V 24” Pneumatic Cut-Off Saw with Foot Pedal Control (LH or RH) PCS24 at Elite Metal Tools
Cantek 15HP 230V 24” Pneumatic Cut-Off Saw with Foot Pedal Control (LH or RH) PCS24
  • Cutting Capacity (Thickness x Width): 2″x21″, 4″x19″, 6″x15″, 7″x8″
  • Cycle Speed: 40 strokes/min
  • Cycle Operation: Air / mechanical
  • Saw Blade Size: 24″ max. (20″ min.)
$15,120
As low as $299.22/mo
View Details
Cantek 230V Three Phase 25” Wide Belt Sander C251 at Elite Metal Tools
Cantek 230V Three Phase 25” Wide Belt Sander C251
  • Abrasive belt size: 25” x 60”
  • Maximum width stock: 24”
  • Maximum thickness opening: 4”
  • Minimum part length: 13”
$12,915
As low as $419.73/mo
View Details
Cantek 230V Three Phase 29FPM Automatic Pre-Milling Compact Edgebander with Quick-Change Glue Pot MX350 at Elite Metal Tools
Cantek 230V Three Phase 29FPM Automatic Pre-Milling Compact Edgebander with Quick-Change Glue Pot MX350
  • Panel thickness: 0.315” - 1.77”
  • Max pre-milling thickness: 1.77”
  • Working table height: 33.5”
  • Dust collection outlet: Ø 5” x 3 = 1800 CFM 
$35,385
As low as $700.26/mo
View Details
Cantek 10’ Sliding Table Saw with Programmable Rip Fence D405ANC at Elite Metal Tools
Cantek 10’ Sliding Table Saw with Programmable Rip Fence D405ANC
  • Programmable rip fence with maximum cutting width of 51”
  • Motorized blade rise/fall
  • Motorized blade tilting with electronic angle display on control panel
  • 7.5 HP main motor with 1HP scoring motor
$20,265
As low as $401.04/mo
View Details
Cantek Planer Sander Series 230V Three Phase 36” Wide Belt Sander SPL900NDA at Elite Metal Tools
Cantek Planer Sander Series 230V Three Phase 36” Wide Belt Sander SPL900NDA
  • Abrasive belt size: 36” x 75” 
  • Min part length: 16.9”
  • Max thickness opening: 4.7”
  • Feed speed (variable): 31 to 59 FPM 
$52,920
As low as $1,047.28/mo
View Details
Cantek 11” Hydraulic Single Head Horizontal Band Resaw HR11-P at Elite Metal Tools
Cantek 11” Hydraulic Single Head Horizontal Band Resaw HR11-P
  • Max. Input Board size: 11.8” (Wide) x 9.8” (Thick)
  • Conveyor belt size: 11.2” x 215.3”
  • Main Motor: 20 HP – Voltage 230/3/60
  • Max. infeed speed: 52.5 FPM (16 M/min)
$20,895
As low as $413.51/mo
View Details
Cantek 10HP 460V Semi-Optimizing Automatic Defect Cut-Off Saw CFS100 at Elite Metal Tools
Cantek 10HP 460V Semi-Optimizing Automatic Defect Cut-Off Saw CFS100
  • Max. Cutting Range (W x H) – 11.8” x 2.75” OR 5.9” x 3.9” with 18” Blade
  • Saw Spindle Speed: 3200 RPM
  • Feed Motor (Servo Motor): 2.7HP
  • Max. Feed Speed: Variable to 262 ft/min
$61,320
As low as $1,213.52/mo
View Details
Cantek 10HP 24” Miter Cut-Off Saw PCM610 at Elite Metal Tools
Cantek 10HP 24” Miter Cut-Off Saw PCM610
  • Cutting Angles: +60° ~ 0° ~ -60°
  • Cycle Speed: 35-40 cuts/min
  • Saw Blade Size: 24″
  • Saw Arbor Diameter: 1″
$29,820
As low as $590.13/mo
View Details
Cantek 2HP 115V Single Phase 4,400 lb. Capacity 3ft x 6ft Scissor Lift PH36-2 at Elite Metal Tools
Cantek 2HP 115V Single Phase 4,400 lb. Capacity 3ft x 6ft Scissor Lift PH36-2
  • Deck Size: 35” x 71”
  • Lowered Height: 12”
  • Raised Height: 59”
  • Travel: 47”
$7,295
As low as $237.08/mo
View Details

First opening in 1991 and since then have become an internationally acclaimed brand and a pioneer of the global market. They are located in Antalya, Turkey. Cantek is a big supplier of solid wood and panel machinery. They have made a big expansion in their company in the past 31 years in the woodworking machinery industry. 

If you are interested in woodworking saws or anything else Cantek has to offer please contact us. Here at Elite Metal Tools we work our hardest to satisfy all questions and have low prices.