Cantek

Cantek Three Phase 230V Automatic Edgebander with Premilling & Corner Rounding MX370P

Panel thickness: 0.315”~1.77” (8~45 mm)
Edge thickness: 0.0158”~0.118” (0.4 ~ 3 mm)
Working table height: 38” (960 mm)
Power: 10.9 HP 230V Three Phase

$37,485.00

As low as $741/mo

View Details

Cantek 230V 3-Sided Linear Brush Sander LBS-300-5S

Max. working width: 11″
Max. working height: 4″
Feed speed (Variable): 6.5 ~ 27 FPM
Speed of sanding wheel: 200 ~ 1200 RPM

$17,850.00

As low as $353/mo

View Details

Cantek 12” x 166” Oscillating Edge Sander OES-512D

Sanding motor: 10 HP
Sanding belt size: 12” x 166”
Front & Rear Table Size: 10.43” x 60.9”
Table: side: 13.8” x 17.7”

$11,550.00

As low as $375/mo

View Details

Cantek Single Phase Standard Automatic Edgebander MX340M

Feeding speed: 23 FPM
Panel thickness: 0.472~1.77”
Edge thickness: 0.0158”~0.118”
Power: 5 HP Single Phase

$17,325.00

As low as $342/mo

View Details

Cantek Standard Single Phase Automatic Edgebander with Pre-milling MX350M

Feeding speed: 23 FPM (7 m/min.)
Panel thickness: 0.472~1.77” (12~45 mm)
Edge thickness: 0.0158”~0.118” (0.4 ~ 3 mm)
Working table height: 33.7” (856mm)

$22,995.00

As low as $455/mo

View Details

Cantek Single Phase 230V High Frequency Automatic Edgebander MX340

Feeding speed: 29.5 FPM (9 m/min.)
Panel thickness: 0.315~1.77” (8~45 mm)
Edge thickness: 0.0158”~0.118” (0.4 ~ 3 mm)
Power: 7.4 HP Single Phase 230V

$22,365.00

As low as $442/mo

View Details

Cantek 230V Three Phase 43” Wide Belt Sander with 20HP Motor and 60” Belt C431

Abrasive belt size: 44” x 60”
Max width stock: 43”
Max thickness opening: 5.9”
Feed speed (variable): 13 to 52 FPM

$27,299.00

As low as $540/mo

View Details

Cantek 2HP 115V Single Phase 4,400 lb. Capacity 4ft x 8ft Scissor Lift PH48-2

Deck Size: 47” x 94”
Lowered Height: 14”
Raised Height: 71”
Travel: 58”

$7,980.00

As low as $259/mo

View Details

Cantek 230V Three Phase 37” Two Head Wide Belt Sander with Variable Feed Speed C372

Abrasive belt size: 37” x 60”
Main motor (First head): 20HP
Max thickness opening: 5”
Feed speed (variable): 13 to 52 FPM

$29,085.00

As low as $575/mo

View Details

Cantek 230V Single Phase 36” Wide Belt Sander with 60” Belt C371

Abrasive belt size: 37” x 60”
Main motor: 10HP
Feed speed (variable): 13 to 52 FPM
Max thickness opening: 5”

$20,895.00

As low as $413/mo

View Details

Cantek 230V Three Phase 36” Wide Belt Sander with 60” Belt C371

Abrasive belt size: 37” x 60”
Main motor: 20HP
Feed speed (variable): 13 to 52 FPM
Max thickness opening: 5”

$20,199.00

As low as $399/mo

View Details

Cantek 9” x 138” Oscillating Edge Sander PW-120E

Working Capacity (LxH) 47” x 8”
Belt Size (LxH) 138 ½” x 9”
Sanding Belt Speed 1080 m/min (3544 FPM)
Motor 3HP: 230-volt 3 phase

$7,875.00

As low as $255/mo

View Details

Cantek Three Phase 230V High Frequency Automatic Edgebander MX340

Feeding speed: 29.5 FPM (9 m/min.)
Panel thickness: 0.315~1.77” (8~45 mm)
Edge thickness: 0.0158”~0.118” (0.4 ~ 3 mm)
Power: 7.4 HP Three Phase 230V

$22,785.00

As low as $450/mo

View Details

Cantek Classic S Single Phase 24" x 60" Wide Belt Sander S251

Abrasive Belt Size: 25” x 60”
Working Width: 25″
Minimum Part Length: 13″
Minimum Thickness Opening: 5″

$13,860.00

As low as $450/mo

View Details

Cantek Three Phase 230V High Frequency Automatic Edgebander with Pre-Milling MX350

Feeding speed: 29.5 FPM
Panel thickness: 0.472″~1.77″
Edge thickness: 0.0158″~0.118″
Working table height: 33.47″

$30,975.00

As low as $612/mo

View Details

Cantek 230V Three Phase 25” Wide Belt Sander C251

Abrasive belt size: 25” x 60”
Maximum width stock: 24”
Maximum thickness opening: 4”
Infeed table: 11-1/2”

$11,865.00

As low as $385/mo

View Details

Cantek 6” x 108” 1.5 HP Single Phase Edge Sander CT-108

Sanding belt size: 6″ x 108″
Motor: 1.5 HP (1-Phase)
Front table: 37″ x 7 ¾”
Side table: 19″ x 12″

$3,150.00

As low as $102/mo

View Details

Cantek Three Phase Standard Automatic Edgebander MX340M

Feeding speed: 23 FPM
Panel thickness: 0.472~1.77”
Edge thickness: 0.0158”~0.118”
Power: 5 HP Three Phase

$17,325.00

As low as $342/mo

View Details

Cantek Classic S Single Phase 36” x 60” Wide Belt Sander S371

Main Motor: 15 HP
Working Width: 37″
Minimum Part Length: 12.5″
Maximum Thickness Opening: 5″

$18,795.00

As low as $371/mo

View Details

Cantek Professional SR 230V Three Phase 37” Two Head Wide Belt Sander with 75” Belt SR37DA

1st Main Motor: 20 HP
Working Width: 36″
Minimum Part Length: 16.9″
Maximum Thickness Opening: 4.7″

$43,260.00

As low as $856/mo

View Details

Cantek 9” x 165” Oscillating Edge Sander OES-509D

Sanding motor: 7.5 HP
Sanding belt size: 9” x 165”
Front & Rear Table Size: 10.43” x 60.9”
Table: side: 13.8” x 17.7”

$9,975.00

As low as $324/mo

View Details

Cantek 1HP Three Phase Automatic Edgebander MX370M (3PH)

Panel Thickness: 0.472 -1.77”
Edge Thickness: 0.0158”-0.118”
Feeding Speed: 23 FPM (7 m/min.)
Feed Motor: 1 HP

$27,615.00

As low as $546/mo

View Details

Cantek Portable Edge Bander Package MX550AU

Tape Thickness: (0.4 – 3 mm)
Width of Tape: (10 – 65 mm)
Feeding Speed: 0.1 ~ 6 M/mm
Glue Pot Capacity: 400 ml

$2,835.00

As low as $92/mo

View Details

Cantek Standard Three Phase Automatic Edgebander with Pre-milling MX350M

Feeding speed: 23 FPM (7 m/min.)
Panel thickness: 0.472~1.77” (12~45 mm)
Edge thickness: 0.0158”~0.118” (0.4 ~ 3 mm)
Working table height: 33.7” (856mm)

$22,995.00

As low as $455/mo

View Details

First opening in 1991 and since then have become an internationally acclaimed brand and a pioneer of the global market. They are located in Antalya, Turkey. Cantek is a big supplier of solid wood and panel machinery. They have made a big expansion in their company in the past 31 years in the woodworking machinery industry.

If you are interested in woodworking saws or anything else Cantek has to offer please contact us. Here at Elite Metal Tools we work our hardest to satisfy all questions and have low prices.