Cantek

  • Max. working capacity (W x H): 15 3/4″ x 9.8″     
  • Saw wheel diameter: 28″             
  • Feed speed: variable: 13~90 FPM             
  • Conveyor belt size: 15.16″ x 215.4″              
$32,970
As low as $652.47/mo

  • Sanding motor: 10 HP
  • Sanding belt size: 12” x 166”
  • Front & Rear Table Size: 10.43” x 60.9”
  • Table: side: 13.8” x 17.7”
$12,705
As low as $412.91/mo

  • Max. working width: 11″
  • Max. working height: 4″
  • Feed speed (Variable): 6.5 ~ 27 FPM
  • Speed of sanding wheel: 200 ~ 1200 RPM            
$19,635
As low as $388.57/mo

  • Max. Input Board Size: 11.8” (Wide) x 9.8” (Thick) (300 x 250mm)
  • Conveyor belt size: 11.2” x 215.3” (285 x 5470mm)
  • Diameter of saw wheel: 28” Dia. x 1” Wide
  • Main Motor: 20 HP
$15,855
As low as $313.77/mo

  • Main Motor: 10 HP
  • Working Width: 36″
  • Minimum Part Length: 12.5″
  • Maximum Thickness Opening: 5.9″
$20,895
As low as $413.51/mo

  • Deck Size: 47” x 94”
  • Lowered Height: 14”
  • Raised Height: 71”
  • Travel: 58”
$8,820
As low as $286.65/mo

  • Abrasive belt size: 44” x 60”
  • Max width stock: 43”
  • Max thickness opening: 5.9”
  • Feed speed (variable): 13 to 52 FPM
$28,980
As low as $573.51/mo

  • Working Capacity (LxH) 47” x 8”
  • Belt Size (LxH) 138 ½” x 9”
  • Sanding Belt Speed 1080 m/min (3544 FPM)
  • Motor 3HP: 230-volt 3 phase
$8,610
As low as $279.82/mo

  • Abrasive belt size: 37” x 60” 
  • Main motor: 10HP 
  • Feed speed (variable): 13 to 52 FPM
  • Max thickness opening: 5”
$22,995
As low as $455.07/mo

  • Abrasive belt size: 37” x 60” 
  • Main motor: 20HP 
  • Feed speed (variable): 13 to 52 FPM
  • Max thickness opening: 5”
$22,050
As low as $436.36/mo

  • Saw Wheel Diameter: 37″
  • Table size: 45-1/4” x 31-1/2″
  • Throat Capacity: 36-1/2″
  • Motor: 10 HP
$15,855
As low as $313.77/mo

  • Max. Input Board size: 11.8” (Wide) x 9.8” (Thick)
  • Conveyor belt size: 11.2” x 215.3”
  • Main Motor: 20 HP – Voltage 230/3/60
  • Max. infeed speed: 52.5 FPM (16 M/min)
$21,210
As low as $419.74/mo

  • Deck Size: 35” x 71”
  • Lowered Height: 12”
  • Raised Height: 59”
  • Travel: 47”
$7,245
As low as $235.46/mo

  • 1st main motor (planer): 40 HP 
  • Min part length: 16.9”
  • Feed speed (variable): 13 to 59 FPM
  • Pass line height: 37” 
$107,730
As low as $2,131.97/mo

  • 1st main motor (planer): 40 HP 
  • Min part length: 16.9”
  • Feed speed (variable): 13 to 59 FPM
  • Pass line height: 37” 
$107,730
As low as $2,131.97/mo

  • Saw wheel diameter: 20″
  • Motor: 3HP
  • Table Size: 26-3/4″ x 20-1/2″
  • Throat Capacity: 18-3/4″
$5,145
As low as $167.21/mo

  • Abrasive belt size: 25” x 60”
  • Maximum width stock: 24”
  • Maximum thickness opening: 4”
  • Minimum part length: 13”
$12,915
As low as $419.73/mo

  • Abrasive belt size: 36” x 75” 
  • Min part length: 16.9”
  • Max thickness opening: 4.7”
  • Feed speed (variable): 31 to 59 FPM 
$52,710
As low as $1,043.13/mo

  • Abrasive Belt Size: 25” x 60”
  • Working Width: 24″
  • Minimum Part Length: 13″
  • Minimum Thickness Opening: 5.9″
$15,330
As low as $303.38/mo

  • Abrasive belt size: 37” x 60”
  • Main motor (First head): 20HP 
  • Max thickness opening: 5”
  • Feed speed (variable): 13 to 52 FPM 
$32,025
As low as $633.77/mo

  • Table size: 45-1/4″ x 31-1/2″
  • Throat capacity: 30-5/8″
  • Height capacity: 15-3/8″
  • Comes with a feeder
$19,110
As low as $378.18/mo

  • Working width: 36”
  • Max thickness opening: 4.7”
  • Feed speed (variable): 13 to 59 FPM
  • Pass line height: 37”
$50,190
As low as $993.26/mo

  • Working width: 36”
  • Max thickness opening: 4.7”
  • Feed speed (variable): 13 to 59 FPM
  • Pass line height: 37”
$48,090
As low as $951.70/mo

  • Sanding motor: 7.5 HP
  • Sanding belt size: 9” x 165”
  • Front & Rear Table Size: 10.43” x 60.9”
  • Table: side: 13.8” x 17.7”
$11,025
As low as $358.31/mo

First opening in 1991 and since then have become an internationally acclaimed brand and a pioneer of the global market. They are located in Antalya, Turkey. Cantek is a big supplier of solid wood and panel machinery. They have made a big expansion in their company in the past 31 years in the woodworking machinery industry. 

If you are interested in woodworking saws or anything else Cantek has to offer please contact us. Here at Elite Metal Tools we work our hardest to satisfy all questions and have low prices.