Cantek

Cantek 16” Single Head Horizontal Band Resaw HR400PB

Max. working capacity (W x H): 15 3/4″ x 9.8″
Saw wheel diameter: 28″
Feed speed: variable: 13~90 FPM
Conveyor belt size: 15.16″ x 215.4″

$30,975.00

As low as $612/mo

View Details

Cantek 230V 3-Sided Linear Brush Sander LBS-300-5S

Max. working width: 11″
Max. working height: 4″
Feed speed (Variable): 6.5 ~ 27 FPM
Speed of sanding wheel: 200 ~ 1200 RPM

$17,850.00

As low as $353/mo

View Details

Cantek 2HP Pneumatic Hollow Chisel Mortiser PCM120

Max. Stock Width: 12”
Max. Mortising Depth: 4”
Chisel Range: 1/4″-3/4″
Spindle Speed: 3400 RPM

$6,720.00

As low as $218/mo

View Details

Cantek 20 HP Single Head Economical Horizontal Resaw HR12E

Max. Input Board Size: 11.8” (Wide) x 9.8” (Thick) (300 x 250mm)
Conveyor belt size: 11.2” x 215.3” (285 x 5470mm)
Diameter of saw wheel: 28” Dia. x 1” Wide
Main Motor: 20 HP

$14,595.00

As low as $474/mo

View Details

Cantek 12” x 166” Oscillating Edge Sander OES-512D

Sanding motor: 10 HP
Sanding belt size: 12” x 166”
Front & Rear Table Size: 10.43” x 60.9”
Table: side: 13.8” x 17.7”

$11,550.00

As low as $375/mo

View Details

Cantek 230V Three Phase 43” Wide Belt Sander with 20HP Motor and 60” Belt C431

Abrasive belt size: 44” x 60”
Max width stock: 43”
Max thickness opening: 5.9”
Feed speed (variable): 13 to 52 FPM

$27,299.00

As low as $540/mo

View Details

Cantek 11” Hydraulic Single Head Horizontal Band Resaw HR11-P

Max. Input Board size: 11.8” (Wide) x 9.8” (Thick)
Conveyor belt size: 11.2” x 215.3”
Main Motor: 20 HP – Voltage 230/3/60
Max. infeed speed: 52.5 FPM (16 M/min)

$19,320.00

As low as $382/mo

View Details

Cantek 230V Three Phase 37” Two Head Wide Belt Sander with Variable Feed Speed C372

Abrasive belt size: 37” x 60”
Main motor (First head): 20HP
Max thickness opening: 5”
Feed speed (variable): 13 to 52 FPM

$29,085.00

As low as $575/mo

View Details

Cantek 230V Single Phase 36” Wide Belt Sander with 60” Belt C371

Abrasive belt size: 37” x 60”
Main motor: 10HP
Feed speed (variable): 13 to 52 FPM
Max thickness opening: 5”

$20,895.00

As low as $413/mo

View Details

Cantek 230V Three Phase 36” Wide Belt Sander with 60” Belt C371

Abrasive belt size: 37” x 60”
Main motor: 20HP
Feed speed (variable): 13 to 52 FPM
Max thickness opening: 5”

$20,199.00

As low as $399/mo

View Details

Cantek 9” x 138” Oscillating Edge Sander PW-120E

Working Capacity (LxH) 47” x 8”
Belt Size (LxH) 138 ½” x 9”
Sanding Belt Speed 1080 m/min (3544 FPM)
Motor 3HP: 230-volt 3 phase

$7,875.00

As low as $255/mo

View Details

Cantek 37” Bandsaw Resaw 10 HP Three Phase Motor HB-950A

Saw Wheel Diameter: 37″
Table size: 45-1/4” x 31-1/2″
Throat Capacity: 36-1/2″
Motor: 10 HP

$14,490.00

As low as $470/mo

View Details

Cantek Classic S Single Phase 24" x 60" Wide Belt Sander S251

Abrasive Belt Size: 25” x 60”
Working Width: 25″
Minimum Part Length: 13″
Minimum Thickness Opening: 5″

$13,860.00

As low as $450/mo

View Details

Cantek 24” Bandsaw 3 HP Single Phase Motor HB-600R

Saw wheel diameter: 24″
Motor: 3 HP
Table Size: 31 ½" x 23 7/8"
Throat Capacity: 22 7/8"

$5,565.00

As low as $180/mo

View Details

Cantek 230V Three Phase 25” Wide Belt Sander C251

Abrasive belt size: 25” x 60”
Maximum width stock: 24”
Maximum thickness opening: 4”
Infeed table: 11-1/2”

$11,865.00

As low as $385/mo

View Details

Cantek 6” x 108” 1.5 HP Single Phase Edge Sander CT-108

Sanding belt size: 6″ x 108″
Motor: 1.5 HP (1-Phase)
Front table: 37″ x 7 ¾”
Side table: 19″ x 12″

$3,150.00

As low as $102/mo

View Details

Cantek 20” Bandsaw 3 HP Single Phase Motor HB-500R

Saw wheel diameter: 20″
Motor: 3HP
Table Size: 26-3/4″ x 20-1/2″
Throat Capacity: 18-3/4″

$4,725.00

As low as $153/mo

View Details

Cantek Classic S Single Phase 36” x 60” Wide Belt Sander S371

Main Motor: 15 HP
Working Width: 37″
Minimum Part Length: 12.5″
Maximum Thickness Opening: 5″

$18,795.00

As low as $371/mo

View Details

Cantek Professional SR 230V Three Phase 37” Two Head Wide Belt Sander with 75” Belt SR37DA

1st Main Motor: 20 HP
Working Width: 36″
Minimum Part Length: 16.9″
Maximum Thickness Opening: 4.7″

$43,260.00

As low as $856/mo

View Details

Cantek 32" Three Phase 20 HP Band Resaw with HF150A Feeder HB800

Table size: 45-1/4″ x 31-1/2″
Throat capacity: 30-5/8″
Height capacity: 15-3/8″
Comes with HF-150 Feeder

$17,115.00

As low as $338/mo

View Details

Cantek 9” x 165” Oscillating Edge Sander OES-509D

Sanding motor: 7.5 HP
Sanding belt size: 9” x 165”
Front & Rear Table Size: 10.43” x 60.9”
Table: side: 13.8” x 17.7”

$9,975.00

As low as $324/mo

View Details

Cantek 12” Tilting Bed Horizontal Resaw HR300PBX

Conveyor belt size: 11.2” x 215”
Machine wheel dimensions: 28” Dia. x 2” Wide
Main motor (Resaw wheels): 30 HP
Variable feed speeds: 0~120 FPM (0~37 m/min)

$32,445.00

As low as $642/mo

View Details

Cantek Classic S 20HP 230V Three Phase 36" x 60" Two Head Wide Belt Sander S372

Feed Motor: 1 HP
Working Width: 37″
Minimum Part Length: 12.5″
Maximum Thickness Opening: 5″

$24,675.00

As low as $488/mo

View Details

Cantek 24” Bandsaw Resaw 5 HP Three Phase Motor HB-600A

2 in 1 machine for rip and curve band sawing
Saw Wheel Diameter: 24″
Table Size: 31-1/2″ x 23-3/4″
Throat Capacity: 22-7/8″

$6,195.00

As low as $201/mo

View Details

First opening in 1991 and since then have become an internationally acclaimed brand and a pioneer of the global market. They are located in Antalya, Turkey. Cantek is a big supplier of solid wood and panel machinery. They have made a big expansion in their company in the past 31 years in the woodworking machinery industry.

If you are interested in woodworking saws or anything else Cantek has to offer please contact us. Here at Elite Metal Tools we work our hardest to satisfy all questions and have low prices.