Baileigh Industrial

• Rated Input Current: 20A
• Power Factor: 0.8
• Insulation Class: F
• Enclosure Protection: IP21S

• Miters left and right 
• Centering vise 
• Cuts non-ferrous metals 
• Blade turns at 3200 rpm

• Cooling System: Fan Cooled
• Rated Input Current: 20A
• Power Factor: 0.75
• Insulation Class: F

• Speed 0 – 6 rpm (Variable)
• Thru Hole OD 2-3/8"
• Chuck Capacity 1/4" OD/10-3/4" ID
• Chuck Size Three Jaw 8"

• 41/4" Capacity
• Pneumatic centering vise, hydraulic blade descent
• Automatic shut-off and vise release
• 220V, 3PH

• Pneumatic centering vise w/ Stock stop mechanism
• 41/4" Capacity
• 220V, 3PH
• 14" Blade

• Efficiency: 85%
• Power Factor: 0.75
• Insulation Class: H
• Enclosure Protection: IP21S

The CS-C485SA is a 16-1/2" vertical column cold saw and is a semi automatic machine that uses a Yaskawa® inverter drive to control the saw blade speed up to 120 rpm's. This cold saw comes standard with an industrial grade coolant system, drive motor and hydraulic feeding system that will provide decades of profitable use to any demanding fabrication or machine shop.

• 3.5HP Motor 
• 1.5" Drill Capacity 
• 108-1800rpm Spindle Speed
• 7.48" Spindle Travel 

• Spindle Taper MT3
• Table Slot .625"
• Tapping Capacity 1/2"
• Main Motor 2 hp

• 1/8HP Coolant Motor 
• 1.5" Drill Capacity 
• 85-4000rpm Spindle Speed
• Tapping Capacity 3/4" 

• Spindle Travel: 5.9"
• Quill Diameter: 2.44”
• Tapping Capacity: 5/8"
• Drill Capacity: 1.25"

• 11" Blade
• Miter both ways, Stop Mechanism
• 23/4" Capacity
• Self centering vice

• 10.2" Minimum Height 
• 660lbs Capacity 
• Manual 
• Table Size 32"x20"

• Cuts Non-ferrous metals - Blade turns at 3200 rpm
• 41/4" Capacity
• Miters left and right
• 220V, 3PH

• Filter Type 99% 5 Micron – 91% 1 Micron
• Number of Filters 2
• Filter Size 20" x 24"
• CFM 1,575 Max – 1370 Filtered Air

• Spindle Speeds: 5
• Spindle Taper: B16
• Rpm: 250, 700, 1150, 1900, & 2900
• Drill Capacity Steel: 5/8"

• 11" Blade
• Semi-Automatic operation - manual feed also available
• Self centering vice
• 2.75" Tube Capacity 

• Drill Capacity Steel: 1"
• Spindle Travel: 3"
• Base Size: 23" x 16"
• Rpm: 250, 700, 1150, 1900, & 2900

• 110V
• Table Capacity 484lbs
• Foot Pedal Operated 
• 13" Turn Table 

• Table Capacity 1100lbs
• Variable Speed
• 19.5" Turn Table 
• 135 Degree of Tilt 

• Table capacity 770Ibs
• 13" turn table
• Easy to use manual tilt
• 110V, 1PH

• 5.5 ton capacity (RWP-55)
• Perfect for welding, polishing, glue-lining, and assembling
• Dual drive wheelsu Dual idler wheels
• AC inverter drivenu Self-aligning

• Cooling System: Fan Cooled
• Power: Dual Voltage - 120V/230V Single Phase
• Efficiency: 85%
• Power Factor: 0.75