Table Saws

  • Motor: 3 HP, 220V, single-phase, 13A
  • Rip capacity: 36" right, 18" left of blade
  • Max. depth of cut @ 90°: 3-3/16"
  • Max. depth of cut @ 45°: 2-3/16"
  • Table size: 53" x 37"
  • Floor to table height: 32-1/4"
  • Maximum cutting width: 18"
  • Spindle speed: 4500 RPM
  • 7.5 hp three phase main motor with 1 hp scoring motor
  • Max rip cutting width: 51.2”
  • Sliding table dimension: 102.4″ x 14.9″
  • Blade tilting adjustment: 0°~45°
  • Motor: 3HP, 240V, Single-phase
  • Max Table size is 40" x 27"
  • Maximum depth of cut at 90° 3"
  • Maximum depth of cut at 45° 2-1/8"
  • Max. depth of cut at 90°: 4″
  • Max. depth of cut at 45°: 2 3/4″
  • Table size: 48″x30″
  • Table height: 34 1/4″
  • Programmable rip fence with maximum cutting width of 51”
  • Motorized blade rise/fall
  • Motorized blade tilting with electronic angle display on control panel
  • 7.5 HP main motor with 1HP scoring motor
  • Max. depth of cut at 90°: 4″
  • Max. depth of cut at 45°: 2 3/4″
  • Table size: 48″x30″
  • Electrics: 230/1/60
  • 5 hp three phase main motor with 1 hp scoring motor
  • Max rip cutting width: 51.2”
  • Sliding table dimension: 126″ x 14.9″
  • Blade tilting adjustment: 0°~45°
  • Motor: 3 HP, 240V, single-phase
  • Fully assembled table size: 48"W x 27"D
  • Maximum depth of cut @ 90° 3"
  • Maximum depth of cut @ 45° 2-1/8"
  • Max. depth of cut at 90°: 5″
  • Max. depth of cut at 45°: 3 1/2″
  • Table size: 48″x 38″
  • Table height: 34 1/4″
  • Max. depth of cut at 90°: 5″
  • Max. depth of cut at 45°: 3 1/2″
  • Table size: 48″x 38″
  • Table height: 34 1/4″
  • 5 hp single phase main motor with 1 hp scoring motor
  • Max rip cutting width: 51.2”
  • Sliding table dimension: 102.4″ x 14.9″
  • Blade tilting adjustment: 0°~45°
  • Motor: 5 HP, 240V, Single-phase
  • Fully assembled table size: 48"W x 27"D
  • Cutting capacity: 8" left & 32" right of blade
  • 4" dust port included
  • Motor: 3 HP, 220V, single-phase
  • Maximum rip capacity: 52" right, 18" left
  • Table height from floor: 34-7/8"
  • Table size with extension: 27" x 75-3/4"
  • Table size: 36″x27″
  • Max. rip to right of blade: 50″
  • Max. depth of cut at 90°: 3″
  • Max. depth of cut at 45°: 2″
  • Programmable rip fence with maximum cutting width of 51”
  • Motorized blade rise/fall
  • Motorized blade tilting with electronic angle display on control panel
  • 7.5 HP main motor with 1HP scoring motor
  • Sliding table dimension: 63” x 12.4”
  • 5 HP Three Phase main motor with ¾ HP scoring motor
  • Cutting width – ripping: 51” max
  • 0-45° Manual Tilting adjustment for main saw blade
  • Sliding table dimension: 63” x 12.4”
  • 5 HP Single Phase main motor with ¾ HP scoring motor
  • Cutting width – ripping: 51” max
  • 0-45° Manual Tilting adjustment for main saw blade
  • 5 HP single phase main motor with 1 HP scoring motor
  • 51″ rip capacity
  • Sliding table dimensions: 10 ft. x 14”
  • Blade tilt: 0 – 45°
  • Max. depth of cut at 90°: 5 1/2″
  • Max. depth of cut at 45°: 3 7/8″
  • Table size: 48″x 38″
  • Table height: 34 1/4″
  • 5 HP three phase main motor with 1 HP scoring motor
  • 51″ rip capacity
  • Sliding table dimensions: 10 ft. x 14”
  • Blade tilt: 0 – 45°
  • Motor: 3 HP, 240V, Single-phase
  • Extension table: 44" x 27"
  • Maximum depth of cut @ 90°: 3"
  • Maximum depth of cut @ 45°: 2-1/8"
  • Rip capacity: 52" right, 18" left of blade
  • Max. depth of cut @ 90°: 3-1/8"
  • Max. depth of cut @ 45°: 2-1/8"
  • Table size with extensions: 76" W x 65-5/8" D
  • 7.5 hp three phase main motor with 1 hp scoring motor
  • Max rip cutting width: 51.2”
  • Sliding table dimension: 126″ x 14.9″
  • Blade tilting adjustment: 0°~45°