Table Saws

• Max Tilt: 45º
• Max Cutting Length: 120"
• Main Motor: 5HP, 4000 RPM, 3.7 Kw      
• Electrical Specs: 1 PH, 220V, 30 Amps, 60 Hz       

• Max Tilt: 45º
• Max Cutting Length: 120"
• Main Motor: 5HP, 4000 RPM, 3.7 Kw      
• Electrical Specs: 3 PH, 220V, 30 Amps, 60 Hz       

• Max tilt: 45°
• Crosscut Capacity: 126"
• Electrical Specs: 1 PH, 220V, 30 Amps, 60 Hz       
• Main Motor: 5HP, 4000 RPM 3.7 KW

• Motor: Single Phase, 5 HP
• Max. Cutting Length: 120”
• Digital Display for Rip Fence
• Max depth cut: 3″

• 7.5 hp motor with 4 speeds: 3,000, 4,000, 5,000, and 6,000 rpm.
• Set the RPM by manually moving the belts to different gears.
• Digital readout (DRO) shows the blade speed to help with repeatability.
• Comes standard with a 12” blade, but accepts up to a huge 16” blade.

• Max Tilt: 45º
• Max Cutting Length: 120"
• Main Motor: 7.5 HP, 4000 RPM, 5.5 Kw
• Electrical Specs: 3 PH, 220V, 30 Amps, 60 Hz

• Max Blade Diameter: 10
• Main Blade Arbor: 5/8"
• Max Rip Capacity (Right/Left): 29 1/2", 14 1/2"
• Motor: 1 Phase, 220V

• Max Blade Diameter: 10
• Main Blade Arbor: 5/8"
• Max Rip Capacity (Right/Left): 29 1/2", 14 1/2"
• Motor: 1 Phase, 110V

3 HP
4300 RPM
220 V 1PH
5/8" Saw Harbo

• 5 hp three phase main motor with 1 hp scoring motor
• Max rip cutting width: 51.2”
• Sliding table dimension: 126″ x 14.9″
• Blade tilting adjustment: 0°~45°

• 5 hp single phase main motor with 1 hp scoring motor
• Max rip cutting width: 51.2”
• Sliding table dimension: 102.4″ x 14.9″
• Blade tilting adjustment: 0°~45°

• Programmable rip fence with maximum cutting width of 51”
• Motorized blade rise/fall
• Motorized blade tilting with electronic angle display on control panel
• 7.5 HP main motor with 1HP scoring motor

• 5 HP single phase main motor with 1 HP scoring motor
• 51″ rip capacity
• Sliding table dimensions: 10 ft. x 14”
• Blade tilt: 0 – 45°

• Sliding table dimension: 63” x 12.4”
• 5 HP Single Phase main motor with ¾ HP scoring motor
• Cutting width – ripping: 51” max
• 0-45° Manual Tilting adjustment for main saw blade

• 7.5 hp three phase main motor with 1 hp scoring motor
• Max rip cutting width: 51.2”
• Sliding table dimension: 126″ x 14.9″
• Blade tilting adjustment: 0°~45°

• Max. depth of cut at 90°: 5 1/2″
• Max. depth of cut at 45°: 3 7/8″
• Table size: 48″x 38″
• Table height: 34 1/4″

• 110/220V 1 PH (Prewired 110V)
• 1.75 Horse Power
• Maximum Rip Cut (Right) 36"
• 4000 RPM

• 220V, 1PH Motor
• 4300 RPM
• 3HP
• 10" Blade

• Max. depth of cut at 90°: 5″
• Max. depth of cut at 45°: 3 1/2″
• Table size: 48″x 38″
• Table height: 34 1/4″

• Blade diameter: 10”
• Max. working height 90º: 3-1/8
• Table dimensions: 32-1/2”
• Motor: 1 phase, 110 V – 11.8 A or 220 V – 6.8 A

• 220V 1 PH
• Table Saw 3850
• Table Size 20"
• Blade Diameter 10"

• Programmable rip fence with maximum cutting width of 51”
• Motorized blade rise/fall
• Motorized blade tilting with electronic angle display on control panel
• 7.5 HP main motor with 1HP scoring motor

• Max. depth of cut at 90°: 4″
• Max. depth of cut at 45°: 2 3/4″
• Table size: 48″x30″
• Electrics: 230/1/60

• 7.5 hp three phase main motor with 1 hp scoring motor
• Max rip cutting width: 51.2”
• Sliding table dimension: 102.4″ x 14.9″
• Blade tilting adjustment: 0°~45°