Shop Fox 5HP 220V Single Phase 20” Planer with Helical Cutterhead W1865
Manufacturer Part: | EMT ID: |
W1865
|
17681
|
- Max cutting width: 20 in.
- Max cutting height: 8 in.
- Cutter Head Type: Spiral
- Cutter Head Diameter: 3 in.
Description
If quality, dependability, and performance are important to you in a planer, then look no further. The Shop Fox W1865 5 HP Planer features a 20” planing capacity and a 3-1/4” cutterhead with 92 indexable carbide inserts. The inserts can each be rotated three times to expose new, sharp cutting edges. The 4-row helical cutterhead produces ultra-smooth finishes and greatly reduces tearout in figured woods. The feed rate control knob allows the feed rate to be 28 FPM when pushed in and 16 FPM when pulled out. The easy access pedestal-mounted controls include a magnetic switch with thermal overload protection. The 5" dust port connects to your dust-collection system to extract shavings and dust during operation. This master of hardwood has all the features anyone could want, and it’s produced in an ISO 9001 certified factory to assure tight adherence to quality production standards.
This top-of-the-line 20" planer with helical cutterhead is second-to-none and the value for the money is unmatched anywhere! Like all Shop Fox planers, the W1865 comes with a 2-year warranty which covers parts and assures the unit is free from factory defects. (Consumables are not covered by the warranty.) The W1865 manual was written by Shop Fox’s U.S. based Technical Documentation Department and is packed with useful information. The complete and easy-to-read manual makes it easier to assemble and maintain your planer. The Woodstock Customer Service and Technical Support Teams are U.S. based. Parts and accessories for the planer may be available online and shipped from the Woodstock parts warehouse in Springfield, MO.
Features
- Extra‐Large Ball‐Bearing Return Rollers
- Large Side‐Mounted Handwheel
- Cabinet Style Stand
- Internally Mounted 5HP Motor
- Triple V‐Belt Drive
- Pedestal‐Mounted Control Panel with E‐Stop & Magnetic Switch Protection
- 4 Heavy‐Duty Headstock Support Columns
- Anti‐Kickback Fingers
- Oil‐Bath Style Gearbox for Drive System
- Triple Belt Drive Inside Housing
- Heavy‐Duty Cast‐Iron Extension Wings
- Helical Cutterhead with Indexable Carbide Inserts
- Powder‐Coated Finish
Specifications
- Product Dimensions
- Weight: 772 lbs.
- Width (side‐to‐side) x Depth (front‐to‐back) x Height: 44 x 56 x 45 in.
- Footprint (Length x Width): 27‐1/2 x 23 in.
- Electrical
- Power Requirement: 220V, Single‐Phase, 60 Hz
- Prewired Voltage: 220V
- Full‐Load Current Rating: 23A
- Minimum Circuit Size: 30A
- Connection Type: Cord & Plug
- Power Cord Included: Yes
- Power Cord Length: 10 ft.
- Power Cord Gauge: 12 AWG
- Plug Included: Yes
- Included Plug Type: L6‐30
- Switch Type: Button Controls w/Magnetic Switch Protection
- Main Motor
- Horsepower: 5 HP
- Phase: Single‐Phase
- Amps: 23A
- Speed: 3450 RPM
- Type: TEFC Capacitor‐Start Induction
- Power Transfer: Triple V‐Belt Drive
- Bearings: Shielded & Permanently Lubricated
- Centrifugal Switch/Contacts Type: External
- Planer Size: 20 in.
- Max. Cut Width: 20 in.
- Min. Stock Length: 7 in.
- Min. Stock Thickness: 1/4 in.
- Max. Stock Thickness: 8 in.
- Number of Cuts Per Inch: 83, 104
- Number of Cuts Per Minute: 20,000
- Cutterhead Speed: 5000 RPM
- Planing Feed Rate: 16, 28 FPM
- Max. Cut Depth Planing Full Width: 5/64 in.
- Max. Cut Depth Planing 6‐Inch Wide Board: 1/8 in.
- Cutterhead
- Cutterhead Type: Helical
- Cutterhead Diameter: 3‐1/4 in.
- Number of Cutter Rows: 4
- Number of Indexable Cutters: 92
- Cutter Insert Size Length: 15 mm
- Cutter Insert Size Width: 15 mm
- Cutter Insert Size Thickness: 2.5 mm
- Table
- Table/Headstock Movement: 8 in.
- Table Bed Size Length: 56 in.
- Table Bed Size Width: 20 in.
- Table Bed Size Thickness: 2‐1/4 in.
- Number of Bed Rollers: 2
- Floor‐to‐Table Height: 28 ‐ 36 in.
- Construction
- Table: Precision‐Ground Cast Iron
- Body: Cast Iron
- Stand: Steel
- Cutterhead Assembly: Steel
- Infeed Roller: Serrated Steel
- Outfeed Roller: Smooth Steel
- Paint Type/Finish: Powder Coated
Manufacturer | |
SKU |
W1865
|
UPC |
754001004023
|
Shipping Method |
LTL Freight
|
Weight |
804 lb
|
Dimensions |
45 × 30 × 46 in
|
Country of Origin |
Taiwan
|
Warranty |
2 Years
|