GMC Machinery Finish Pro 52” x 85” Heavy Duty 30 HP Metal Wide Belt Sander Deburring & Finishing Machine FP-5285
Manufacturer Part: | EMT ID: |
FP-5285
|
13505
|
- Max Part Width: 51”
- Main Motor: 30 HP 230V 3PH
- Passline Height: 31” – 37”
- Max Thickness Capacity: 3-1/2”
Features
- Motorized Table Lift, with digital readout
- Variable Speed Conveyor
- Conveyor Forward & Reverse
- Belt Safety Over Travel Switches
- Electronic Eye Belt Tracking. Belt tracking adjusting lever (Belt Trimmer) to re-adjust the tracking system when running extremely out of parallel belts
- 4-Jackscrew Table Support
- Double Infeed & Outfeed Pinch Rolls with protective guards
- Conveyor Belt Tracking System
- Safety System with Disc Brake. Air operated disc brakes to stop sanding head in 3-5 seconds in the event of loss of air pressure or activation of any emergency stop device
- Table Height Digital Readout
- Load Meter indicates percentage of full motor loads
- Belt change door electrically interlocked for safety purpose
- Air tensioning of belt for accurate tensioning & compensation of belt stretch
- Quick release sanding head support for fast belt change
- Dust collection hood with 4” outlet is located adjacent to abrasive head in sanding area
- Emergency stops from almost any point
- Noise level bellows 80 dba
Specifications
- Max Part Width: 51” x 3-1/2”
- Abrasive Belt Size: 52” x 85”
- Contact Roller Size: 10” Dia
- Passline Height: 31” – 37”
- Max Thickness Capacity: 3-1/2”
- Conveyor Drive Speeds: 8-40 FPM
- Infeed Conveyor Length: 20”
- Dust Collector Capacity: 2,800 CFM
- Electrics: 208/230, 3-Phase
- Main Motor: 30 HP 230V 3PH
- Conveyor Motor: 3 HP 230V 3PH
- Table Lifting Motor: 3 HP 230V 3PH
- Net Weight (Approx.): 6,650 lbs
- Main Dimensions LxWxH: 89” x 98” x 93”
We strongly recommend to use a good dust collector for our Finish Pro, otherwise, the warranty will be void.
COMPRESSED AIR REQUIRED:
CAUTION: If fire hazardous materials, such as aluminum, titanium, magnesium, etc., are to be processed, a dust collection system that conforms to National Fire Protection Association (NFPA) should be used.
OPTIONAL: WET DUST COLLECTORS use a water filled tank through which all grinding dust is pulled by a motor driven impeller fan. Particles sink to the base of the tank where they can easily be removed by raking into a provided container. Normal tap water is used, there are not filter bags to be changed. Water level is automatically controlled when unit is connected to a water supply. All units are equipped with explosion relief door and sound silencer.
Manufacturer | |
SKU |
FP-5285
|
Shipping Method |
LTL Freight
|
Weight |
6,650 lb
|
Dimensions |
89 × 98 × 93 in
|
Country of Origin |
Taiwan
|
Warranty |
1 Year
|