GMC Machinery Finish Pro 25” x 60” 10HP Heavy-Duty Dry Line Graining Deburring & Finishing Machine FP-2560T

Features

• Computerized programmable material thickness control
• Motorized table lift with digital readout
• Variable speed conveyor
• Conveyor forward & reverse
• Belt safety overtravel switches
• Electronic eye belt tracking, belt tracking adjusting lever (belt trimmer) to re-adjust the tracking system when running extremely out of parallel belts
• 4-Jackscrew Table Support
• Double infeed & outfeed pinch rolls with protective guards
• Conveyor Belt Tracking System
• Safety system with disc brake. Air operated disc brakes to stop sanding head in 3-5 seconds in the event of loss of air pressure or activation of any emergency stop device
• Table Height Digital Readout
• Load meter indicates percentage of full motor loads
• Belt change door electrically interlocked for safety purpose
• Air tensioning of belt for accurate tensioning & compensation of belt stretch
• Quick release sanding head support for fast belt change
• Dust collection hood with 4” outlet is located adjacent to abrasive head in sanding area
• Emergency stops from almost any point
• Noise level bellows 80 dba
• Operation manual, control tags, danger signs, and warning labels in English on machine 

Specifications

• Max Part Width: 24”
• Abrasive Belt Size: 25” x 60”
• Contact Roller Size: 5” diameter
• Passline Height: 31” - 37”
• Thickness Capacity: 20Ga to max 5-1/8”
• Min Workpiece Length: 12” (smaller parts require a fixture)
• Max Workpiece Weight: 275 lbs
• Conveyor Drive Speeds: 16 - 66 fpm
• Infeed Conveyor Length: 20”
• Dust Collector Capacity: 1,100 CFM
• Outlet of Dust Hood: 6”
• Compressed Air Required: 2 CFM @ 90 PSI
• Conveyor Motor: 230V Three Phase 1HP
• Table Lifting Motor: 230V Three Phase ¼HP  
• Electrical Requirements: 230V Three Phase 10HP 45A
• Machine Dims: 51” x 46” x 70”
• Approx Weight: 2,050 lbs 

We strongly recommend using a good dust collector for the GMC Finish Pro, otherwise, the warranty will be void

Optional Add-Ons

• Other voltages available (please contact a sales rep for more info)
• Wet Dust Collector (WDC-2100)
• Heavy Duty Ducting Package (HDDP-2560)

CAUTION: If fire hazardous materials, such as aluminum, titanium, magnesium, etc, are to be processed, a dust collection system that conforms to National Fire Protection Association (NFPA) should be used.

OPTIONAL: WET DUST COLLECTROS use a water filled tank through which all grinding dust is pulled by a motor driven impeller fan. Particles sink to the base of the tank where they can easily be removed by ranking into a provided container. Normal tap water is used, there are not filter bags to be changed. Water level is automatically controlled when unit is connected to a water supply. All units are equipped with explosion relief door and sound silencer.