GMC Machinery Finish Pro 51” x 60” 30HP Heavy-Duty Dry Line Graining Deburring & Finishing Machine FP-5160T

Features

• Computerized programmable thickness control
• Abrasive belt size: 51” x 60”
• 10” diameter heavy-duty drum for perfect graining
• 5-1/8” wide opening for max workpiece thickness 5”
• Motorized table lift with LED display
• Variable Speed Conveyor
• Conveyor forward & reverse
• Belt Safety Overtravel Switches
• Electronic eye belt tracking. Belt tracking adjusting lever (belt trimmer) to re-adjust the tracking system when running extremely out of parallel belts
• 4-Jackscrew Table Support
• Double infeed & outfeed pinch rolls with protective guards
• Conveyor Belt Tracking System
• Safety system with disc brake. Air operated disc brakes to stop sanding head in 3-5 seconds in the event of loss of air pressure or activation of any emergency stop device
• Table Height Digital Readout
• Load meter indicates percentage of full motor loads
• Belt change door electrically interlocked for safety purpose 

Specifications

• Max Part Width: 51”
• Abrasive Belt Size: 51” x 60”
• Contact Roller Size: 8” diameter
• Passline Height: 31” - 37”
• Thickness Capacity: 20Ga to max 5-1/8”
• Conveyor Drive Speeds: 15 - 56 fpm
• Infeed Conveyor Length: 20”
• Dust Collector Capacity: 2,800 CFM
• Outlet Dust Hood: Diameter 6” x 2 outlets
• Conveyor Motor: 230V Three Phase 2HP
• Table Lifting Motor: 230V Three Phase 2HP
• Electrical Requirements: 230V Three Phase 30HP 120A
• Machine Dims: 82” x 68” x 73”
• Approx Weight: 4,190 lbs 

We strongly recommend using a good dust collector for the GMC Finish Pro, otherwise, the warranty will be void 

Optional Add-Ons

• Other voltages available (please contact a sales rep for more info)
• Wet Dust Collector (WDC-2100)
• Heavy Duty Ducting Package (HDDP-FP40)

**This machine requires two Wet Dust Collectors & 2 sets of ducting packages**

CAUTION: If fire hazardous materials, such as aluminum, titanium, magnesium, etc, are to be processed, a dust collection system that conforms to National Fire Protection Association (NFPA) should be used.

OPTIONAL: WET DUST COLLECTROS use a water filled tank through which all grinding dust is pulled by a motor driven impeller fan. Particles sink to the base of the tank where they can easily be removed by ranking into a provided container. Normal tap water is used, there are not filter bags to be changed. Water level is automatically controlled when unit is connected to a water supply. All units are equipped with explosion relief door and sound silencer.

**This model does not work with a phase converter**