Machine

  • Table set up area: 83” x 20”
  • Number of T-slots: 4 positions
  • T-slots, spacing: 0.8”
  • Table load capacity (max.): 4,400 lbs.
$137,166.02
As low as $2,714.51/mo

  • Table Size: 29.5” x 106.3”
  • X & Y Axis Travel: 78.74” x 31.5”
  • Spindle Taper: NST #50
  • Spindle Motor: 220V, 17.5 HP
$169,142
As low as $3,347.32/mo

  • 1/2” Drill chuck, chuck arbor
  • 360° head swivel
  • Adjustable carbide facemill
  • Base taper allows for easier clean up
  • Easy to read internal depth gauge
MSRP: $7,531.09
$5,799
As low as $188.46/mo

  • Spindle Nose-to-Table Surface Distance: 6”-41”
  • Table Dimensions: 118” x 59”
  • Table Load Capacity (max.): 19,800 lbs.
  • Travel X-Axis: 122”
$437,177.40
As low as $8,651.74/mo

  • Table set up area: 54” x 12”
  • Number of T-slots: 3 positions
  • Table load capacity (max.): 660 lbs.
  • T-slot (width x spacing): 0.55” x 3.15”
$33,823.89
As low as $669.37/mo

  • Table Size: 10” x 54”
  • X, Y, Z Axis Travel: 31”, 15.5”, 5”
  • Spindle: 60 - 4500 rpm  
  • Motor: 220V, 3 HP
$49,550
As low as $980.59/mo

  • Table Size: 10” x 54”
  • X, Y, Z Axis Travel: 31”, 15.5”, 5”
  • Spindle: 60 - 4500 rpm  
  • Motor: 440V, 3 HP
$49,550
As low as $980.59/mo

  • Table Size: 10” x 50”
  • X, Y, Z Axis Travel: 31”, 15.5”, 5”
  • Spindle: 60 - 4500 rpm
  • Motor: 220V, 3 HP
$56,499
As low as $1,118.11/mo

  • Table Size: 10” x 50”
  • X, Y, Z Axis Travel: 31”, 15.5”, 5”
  • Spindle: 60 - 4500 rpm
  • Motor: 440V, 3 HP
$56,499
As low as $1,118.11/mo

  • Heavy duty splined motor drive
  • Internal coolant tank built into base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
  • Precision bored and honed milling head
MSRP: $14,865.69
$11,449
As low as $372.09/mo

  • Calibrated fine down feed built in
  • CSA/CUS Certified
  • Easy to read internal depth gauge
  • Full power to the cutting tools through 6 speed geared head
  • Heavy-duty design allows for a variety of precision drilling applications
MSRP: $12,285.69
$9,550
As low as $310.37/mo

  • Table Size: 10” x 50”
  • X, Y, Z Axis Travel: 31”, 15.5”, 5”
  • Spindle: 60 - 4500 rpm
  • Motor: 220V, 5 HP
$60,335
As low as $1,194.02/mo

  • Table Size: 10” x 50”
  • X, Y, Z Axis Travel: 31”, 15.5”, 5”
  • Spindle: 60 - 4500 rpm
  • Motor: 440V, 5 HP
$60,335
As low as $1,194.02/mo

  • Certified Meehanite® castings
  • Heavy duty splined motor drive
  • Internal coolant tank built into base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $14,742.79
$11,345
As low as $368.71/mo

  • Table Size: 9” x 49”
  • X, Y, Z Axis Travel: 31”, 11”, 5”
  • Spindle: 60 - 4500 rpm  
  • Motor: 220V, 3 HP
$46,550
As low as $921.22/mo

  • Automatic oiler releases 3 to 6 cc/cy of lubrication every 30 minutes
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $21,991.39
$16,875
As low as $333.95/mo

  • Table Size: 19.68” x 86.62”
  • X & Y Axis Travel: 59” x 23.62”
  • Spindle Taper: NST #50
  • Spindle Motor: 220V, 20HP
$108,184
As low as $2,140.96/mo

  • Calibrated fine down feed built in
  • CSA/CUS Certified
  • Easy to read internal depth gauge
  • Full power to the cutting tools through 6 speed geared head
  • Heavy-duty design allows for a variety of precision drilling applications
MSRP: $7,899.69
$6,275
As low as $203.93/mo

  • Table Size: 10” x 54”
  • X, Y, Z Axis Travel: 39” x 16.3” x 5”
  • Spindle Nose Taper: R-8
  • Spindle Motor: 220V, 3HP
$20,058
As low as $396.94/mo

  • 1/2” Drill chuck, chuck arbor
  • 360° head swivel
  • Adjustable carbide facemill
  • Base taper allows for easier clean up
  • Easy to read internal depth gauge
MSRP: $5,651.39
$4,465
As low as $145.11/mo

$849
As low as $27.59/mo

  • Number of T-slots: 6 positions
  • Table dimensions: 16” x 31”
  • Table load capacity (max.): 440 lbs.
  • T-slot (width x spacing): 0.55” x 2.48”
$68,107.50
As low as $1,347.84/mo

  • 12.1" High resolution display (1024 x 768) with 3D graphics
  • Available offline software
  • Built-in calculator: Performs standard, trig, and geometry calculations and transfers them directly into part programs
  • Closed loop feedback using Acu-Rite precision linear encoders with 0.00005" resolution
  • Estimated run time feature
MSRP: $62,657.09
$48,495
As low as $959.71/mo

  • Spindle Nose-to-Table Surface Distance: 6”-41”
  • Table Dimensions: 98” x 59”
  • Table Load Capacity (max.): 15,400 lbs.
  • Travel X-Axis: 102.4”
$413,732.61
As low as $8,187.76/mo