Machine

  • Mitutoyo 2 axis DRO - standard 
  • Power feed on X, Y, and Z axis 
  • Standard table and knee locks
  • Way covers and chip tray included 
MSRP: $34,731.72
$27,825
As low as $550.65/mo
  • Table set up area: 50” x 11”
  • Table load capacity (max.): 330 lbs.
  • Motor rating horizontal spindle: 3 Hp
  • Motor rating vertical spindle: 1.1 Hp - 2 Hp
$23,995
As low as $474.86/mo
  • Table Size: 9” x 50”
  • X, Y, Z Axis Travel: 32”, 11”, 5”
  • Spindle: 60 - 4500 rpm  
  • Motor: 220V, 3 HP
$64,295.36
As low as $1,272.40/mo
  • Table Size: 9” x 50”
  • X, Y, Z Axis Travel: 32”, 11”, 5”
  • Spindle: 60 - 4500 rpm  
  • Motor: 440V, 3 HP
$64,295.36
As low as $1,272.40/mo
  • Motor: 1.20HP / 115V / 1PH
  • Drilling Capacity max.: Ø 16 mm / 5/8 in
  • Gear Stages: 2 stages, continuously variable
  • Head Travel: 280 mm / 11.024 in
MSRP: $3,911
$3,450.59
As low as $112.14/mo
  • KW: 1.1
  • RPM: 12000
  • Hz: 200
  • Air consumption: 9 L / min
$15,100
As low as $298.82/mo
  • Table Size: 14.93” x 67”
  • X & Y Axis Travel: 39.37” x 14.93”
  • Spindle Taper: NST #50
  • Spindle Motor: 220V, 5HP
$91,993.24
As low as $1,820.54/mo
  • 1/2” Drill chuck, chuck arbor
  • 360° head swivel
  • Adjustable carbide facemill
  • Base taper allows for easier clean up
  • Easy to read internal depth gauge
MSRP: $8,284.20
$6,565
As low as $213.36/mo
  • Calibrated fine down feed built in
  • CSA/CUS Certified
  • Easy to read internal depth gauge
  • Full power to the cutting tools through 6 speed geared head
  • Heavy-duty design allows for a variety of precision drilling applications
MSRP: $13,514.26
$10,492
As low as $340.99/mo
  • Table Size: 9” X 42”
  • X, Y, Z Axis Travel: 30” X 12” X 23”
  • Motor: 3 H.P.
  • Spindle Nose: R-8
$13,495
As low as $438.58/mo
  • Table Size: 10” x 54”
  • X, Y, Z Axis Travel: 31”, 15.5”, 5”
  • Spindle: 60 - 4500 rpm  
  • Motor: 220V, 3 HP
$68,344.79
As low as $1,352.54/mo
  • Table Size: 10” x 54”
  • X, Y, Z Axis Travel: 31”, 15.5”, 5”
  • Spindle: 60 - 4500 rpm  
  • Motor: 440V, 3 HP
$68,344.79
As low as $1,352.54/mo
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $40,002.26
$31,240
As low as $618.23/mo
  • Adjustable gibs throughout
  • Class 7 bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Internal coolant tank built into casting base
MSRP: $67,301.07
$52,126
As low as $1,031.57/mo
  • Table set up area: 39” x 9”
  • Table load capacity (max.): 330 lbs.
  • Motor rating horizontal spindle: 3 Hp
  • Motor rating vertical spindle: 2 Hp
$17,795
As low as $352.16/mo
  • Easy to read internal depth gauge
  • Full power to the cutting tools through Variable Speed geared head
  • Heavy-duty design allows for a variety of precision drilling applications
  • Mill Drill Stand, p/n 350045, shown in some images, is optional
  • Milling table allows for movement
MSRP: $18,244.26
$14,052
As low as $456.69/mo
  • Table Size: 9” x 49”
  • X, Y, Z Axis Travel: 31”, 11”, 5”
  • Spindle: 60 - 4500 rpm  
  • Motor: 220V, 3 HP
$64,293.30
As low as $1,272.36/mo
  • Class 7 Spindle, R-8 Spindle, Chromed Quill
  • Certified Meehanite Castings, Turcite B on Female Surfaces, 10″ x 54″ Table
  • Easy to Read Dials, One Shot Lubrication, Dove Tail Ways Table and Knee
  • Square Ways on Saddle, Hardened and Ground Table, Hardened and Ground X and Y Slideways
MSRP: $18,000
$14,995
As low as $487.33/mo
  • Table Size: 10” x 54”
  • X, Y, Z Axis Travel: 31”, 15.5”, 5”
  • Spindle: 60 - 4500 rpm
  • Motor: 220V, 5 HP
$72,637.40
As low as $1,437.49/mo
  • Table Size: 10” x 54”
  • X, Y, Z Axis Travel: 31”, 15.5”, 5”
  • Spindle: 60 - 4500 rpm
  • Motor: 440V, 5 HP
$72,637.40
As low as $1,437.49/mo
  • KW: 1.1
  • RPM: 3000
  • Amp: 6.5 A
  • Air consumption: 5 L / min
$7,400
As low as $240.50/mo
  • Motor rating main drive: 12.1 HP
  • Table load capacity: 1,760 lbs
  • Number of T-slots: 5 positions
  • Rapid feed X-, Y-, Z-axis: 1.417 in/min
$78,595
As low as $1,555.39/mo
  • Table Size: 19.68” x 86.62”
  • X & Y Axis Travel: 59” x 23.62”
  • Spindle Taper: NST #50
  • Spindle Motor: 220V, 20HP
$142,642.22
As low as $2,822.88/mo
  • 1/2” Drill chuck, chuck arbor
  • 360° head swivel
  • Adjustable carbide facemill
  • Base taper allows for easier clean up
  • Easy to read internal depth gauge
MSRP: $9,122.07
$7,175
As low as $233.18/mo