Ironworker Tooling Accessories

Maximum Flexibility for Smaller Ironworkers

Cut solids rods, squares, angles and bar-stock all with ONE tool. The Multi-Shear makes quick work of solid round 1/4", 3/8", 1/2", 5/8", 3/4" rod, and 13/16" square. Also cuts flat bar up to 1/4" x 6" and angle up to 2" x 2" x 1/4".

$1,345.71
$1,109.00
Save $237!

Work With the Right Angle

A useful tool for anyone, the Edwards Fabricator's Protractorguides your work to the Shear or Punch stations through 180°. Gauged at 15°increments with an additional designation of 22.5°, the protractor features a long leg and a reversible design to accommodate both right and left hand operators.


Easily Minimizes Distortion

By maintaining constant pressure through the punch cycle, theUrethane Stripper minimizes distortion. A must-have when working with light-gauge material.

$827.14
$695.00

A Quick, Clean, Time-Saving Tool

The Edwards Pipe Notcher eliminates hours of cutting and grinding required for clean saddle joint connections. Simply place your pipe into the bump-die housing and cut a perfect saddle each and every time. Contact Edwards for Schedule 80, tube dies and custom dies.

$521.43
$429.00

Multiple Sizes... No Problem!

$1,215.71
$999.00
Save $217!

Transform your shop press into a Brake.  This Press Brake features our rugged, machined punch and 4-way die.  The 4-way Press Brake die has the following dimensions 1/16", 1/8", 3/16", and 1/4".  

$3,145.71
$2,599.00
Save $547!

Shears a variety of rod

The Edwards Rod Shear and Housing is a heavy-duty accessory tool that comes ready to work your 1/4", 3/8", 1/2", 5/8", 3/4" and 1" solid rod.

$1,865.71
$1,539.00
Save $327!

Precise, Repeatable Bends

$1,570.00
$1,299.00
Save $271!

Notch with Versatility

Coper Notcher tooling, also known as a Nibbler, creates anything from a small nibble to a large notch out of plate or angle. Our three sizes of Coper Notchers are designed to uniquely maximize the capacity and utility of each Ironworker. When versatility is key, our Coper Notcher is indispensable.

 

$1,518.57
$1,249.00
Save $270!

Efficiently Work Angle Iron

The Angle Notcher takes a precise 92° notch from the bottom leg of angle up to 3" x 3" x 1/4" profiles. Bend 90° and quick and clean you're on your way to building a steel frame.

$1,627.14
$1,339.00
Save $288!

Heavy Duty Precision Available in standard and oversize, the robust 1" x 12" x 16" Heavy Duty Gauging Table Kit takes the guesswork out of making precise, repeatable standard or oversize holes. Movable fences clamp down to the table surface with heavy-duty hardware to guide your material to the same punch location every time. The kit includes heavy duty table, mounting plate, hardware and one short and one long movable fence.

$1,030.00
$849.00
Save $181!

A standard feature on new Edwards Ironworkers from 25 Ton to 100 Ton, add our Pedestal Die Table to your existing Edwards Ironworker to punch flange or web surfaces of 2" x 2" steel angle, channel and beam sections. You can even punch larger angle sections leg-down. The Pedestal Die Table allows for the accessory Gauging Table Kit to be easily installed for a larger working and layout surface. Also available in Oversize for your larger Punch applications.

$599.00

When a Standard Punch isn't Enough The Oversize Punch Assembly takes the place of your standard Punch Assembly to accomodate punches and dies in various shapes and sizes from 1" to 1-9/16". Oversize Punch and Die Sets sold separately. See our standard stocked Punch and Die Sets and contact us for custom sizes. Punched holes or shapes larger than 1-9/16" require the 241 Punch Assembly.

$874.29
$719.00
Save $155!

Use this "plug-and-play" accessory when production cutting long material to repeatable lengths. The adjustable proximity switch automatically cycles your machine as you guide the material. The48" Auto Cut, compatible with current Edwards Ironworkers, features a rugged solid-steel housing, guarding snoot, 1" x 48" machined back-gauge stock, electrical cording and adjustable, electrical tiebacks. Installs in minutes with simple instructions

$1,108.57
$909.00
Save $200!

Precise, Repeatable Bends

$1,121.43
$919.00
Save $202!

Precise, Repeatable Bends

$1,267.14
$1,039.00
Save $228!

Making repeatable bends?

Our adjustable Press Brake Back Gauge makes for easy set-up of repeatable bends. Simply bolt it up to the Edwards IronworkerBrake Tooling assembly or Press Brake Tooling for our 20 Ton Shop Press and 40 Ton Shop Press, and a simple hand crank glides the carriage backstop to your desired brake location.

$741.43
$609.00

When bigger is better, use 241 The Edwards 241 Punch Assembly accommodates punch and die sets in various shapes and sizes from 1" through 4". This tooling can be used to punch large holes and slots in anything from sheet metal to plate to steel beams. Shown with optional Oblong Punch and Die Set. Contact Edwards for pricing and availability of the 241 Punch and Die Set to meet your needs.

$1,817.14
$1,499.00
Save $318!

Get started with the basics! Selected to accomodate some of the most commonly used bolts, our Punch/Die Starter Set includes 8 standard round punch and die sets with 1/32" clearance. Sized in 1/8" increments from 3/16" to 1-1/16" and organized in a handy steel box, these are a must-have. Customize your set - choose any eight of our standard round punch and die sets to fit your needs.
$461.43
$379.00

Set Your Stop

Fitted to the back of the Ironworker, the 48" Back Gaugeaccessory provides an adjustable stop for the Angle Shear andFlat Bar Shear stations of your Edwards Ironworker. The sturdy construction and positive attachment to the machine frame ensures accurate, repeatable cuts for your production jobs.

$335.00

Precise, Repeatable Bends

$1,790.00
$1,479.00
Save $311!

Heavy Duty Precision Available in standard and oversize, the robust 1" x 12" x 16" Heavy Duty Gauging Table Kit takes the guesswork out of making precise, repeatable standard or oversize holes. Movable fences clamp down to the table surface with heavy-duty hardware to guide your material to the same punch location every time. The kit includes heavy duty table, mounting plate, hardware and one short and one long movable fence.

$952.86
$789.00
Save $164!

Precision Punching Add precision and speed to your repeated punching projects with our 3/8" thick Gauging Table Kit. The large 12" x 16" table bolts to standard or oversize Pedestal Die Tables. The included adjustable fences and handles clamp down with heavy-duty hardware to guide your material to the same punch location every time. Custom table size and additional fences available.

$288.57
$250.00