Floor Drill Presses

Clausing 23.6" Drill Press with VS Mechanical Clutch 3MT 1.2/1.8 HP Floor AZ32V

Drilling capacity in steel: up to 1.26" (32mm) maximum
Drilling capacity in cast iron: up to 1.38" (35mm) maximum
Built-in low voltage electrical equipment in machine head
Drill guard with microswitch

$13,495.00

As low as $438/mo

View Details

Clausing 23.6" Drill Press with EVS Mechanical Clutch 4MT 3 HP Floor w/Auto Tap AZ34

Tapping capacity in steel: up to 1.30" (33mm) maximum
Tapping capacity in cast iron: up to 1.54" (39mm) maximum
Machine base with 2 T-slots, coolant tank and pump
Built-in low voltage electrical equipment in machine head

$15,295.00

As low as $302/mo

View Details

Clausing 23.6" Drill Press with Step Pulley Manual Feed 3MT 1.2/1.8 HP Floor SZ32

Drilling capacity in steel: up to 1.26" (32mm) maximum
Drilling capacity in cast iron: up to 1.38" (35mm) maximum
Feed crank wheel for manual feed
Depth scale and adjustable depth stop

$11,795.00

As low as $383/mo

View Details

Clausing 23.6" Drill Press with Step Pulley Manual Feed 3MT 1.2/1.8 HP Fixed Table 3SZ32

Mounted to a fixed or oversized table offer greater ease in positioning the workpiece and the flexibility to handle bulky or heavy workpieces.
Each drill head on a multiple head drill can be equipped differently to perform the operation required by that head such as... automatic drilling cycle, automatic tapping or any of the equipment offered.
Drilling machines can be set-up with rotating heads adding flexibility
3 head drill press

$44,185.00

$42,995.00

As low as $850/mo

View Details

Clausing 19.7"Drill Press with GH Manual Feed Fixed Table 2TS25

2 head drill press
Mounted to a fixed or oversized table offer greater ease in positioning the workpiece and the flexibility to handle bulky or heavy workpieces.
Each drill head on a multiple head drill can be equipped differently to perform the operation required by that head such as... automatic drilling cycle, automatic tapping or any of the equipment offered.
Drilling machines can be set-up with rotating heads adding flexibility

$27,510.00

$26,795.00

As low as $530/mo

View Details

Clausing 23.6" Drill Press with Step Pulley Manual Feed 3MT 1.2/1.8 HP Fixed Table 1SZ32

Mounted to a fixed or oversized table offer greater ease in positioning the workpiece and the flexibility to handle bulky or heavy workpieces.
Each drill head on a multiple head drill can be equipped differently to perform the operation required by that head such as... automatic drilling cycle, automatic tapping or any of the equipment offered.
Drilling machines can be set-up with rotating heads adding flexibility
Single head drill press

$16,495.00

As low as $326/mo

View Details

Clausing 19.7" Drill Press with GH Manual Feed Fixed Table 3TS25

3 head drill press
Mounted to a fixed or oversized table offer greater ease in positioning the workpiece and the flexibility to handle bulky or heavy workpieces.
Each drill head on a multiple head drill can be equipped differently to perform the operation required by that head such as... automatic drilling cycle, automatic tapping or any of the equipment offered.
Drilling machines can be set-up with rotating heads adding flexibility

$37,795.00

$36,495.00

As low as $722/mo

View Details

Clausing 27.5" Drill Press with EVS Manual Feed 4MT 4 HP Floor w/Auto Tap SZ40

Drilling capacity in steel: up to 1.57" (40mm) maximum
Drilling capacity in cast iron: up to 1.77" (45mm) maximum
Depth scale and adjustable depth stop
Built-in low voltage electrical equipment in machine head

$16,295.00

As low as $322/mo

View Details

Clausing 23.6" Drill Press with EVS Manual Feed 4MT 3 HP Floor w/Auto Tap SZ34

Drilling capacity in steel: up to 1.57" (40mm) maximum
Drilling capacity in cast iron: up to 1.77" (45mm) maximum
Machine base with 2 T-slots, coolant tank and pump
Drill guard with microswitch

$14,695.00

As low as $477/mo

View Details

Clausing 23.6" Drill Press with Step Pulley Manual Feed 3MT 1.2/1.8 HP Fixed Table 2SZ32

Mounted to a fixed or oversized table offer greater ease in positioning the workpiece and the flexibility to handle bulky or heavy workpieces.
Each drill head on a multiple head drill can be equipped differently to perform the operation required by that head such as... automatic drilling cycle, automatic tapping or any of the equipment offered.
Drilling machines can be set-up with rotating heads adding flexibility
2 head drill press

$30,185.00

$29,495.00

As low as $583/mo

View Details

Clausing 23.6" Drill Press with VS Mechanical Clutch 3MT 1.2/1.8 HP Floor Tapping AZ32VRS

Tapping capacity in steel: up to .87" (30mm) maximum
Tapping capacity in cast iron: up to 1.18" (30mm) maximum
Large worktable with 3 T-slots,
Emergency STOP

$14,460.00

As low as $469/mo

View Details

Dake SB-16 Drill Press

Quick Change Bit
Motor HP 1/2
Drill Capacity 5/8"
Speed Range 240-3400fpm
Overall Height 64"

$2,231.00

As low as $72/mo

View Details

Clausing 23.6" Drill Press with Step Pulley Manual Feed 3MT 1.2/1.8 HP Fixed Table 6SZ32

Mounted to a fixed or oversized table offer greater ease in positioning the workpiece and the flexibility to handle bulky or heavy workpieces.
Each drill head on a multiple head drill can be equipped differently to perform the operation required by that head such as... automatic drilling cycle, automatic tapping or any of the equipment offered.
Drilling machines can be set-up with rotating heads adding flexibility
6 head drill press

$84,495.00

As low as $1,672/mo

View Details

Clausing 19.7" Drill Press with GH Manual Feed 3MT 1/1.5 HP Floor (single phase) TL25/1

“RS" models are equipped with automatic feed reversing TL25 system for tapping
Spindle reversing switch
High/low speed range selector
Drill guard with microswitch

$11,695.00

As low as $380/mo

View Details

Clausing 19.7" Drill Press with GH Manual Feed Fixed Table 5TS25

5 head drill press
Mounted to a fixed or oversized table offer greater ease in positioning the workpiece and the flexibility to handle bulky or heavy workpieces.
Each drill head on a multiple head drill can be equipped differently to perform the operation required by that head such as... automatic drilling cycle, automatic tapping or any of the equipment offered.
Drilling machines can be set-up with rotating heads adding flexibility

$60,685.00

$57,995.00

As low as $1,147/mo

View Details

Dake Force 10DA Hydraulic Shop Press - Dake 10Ton | 110V, 1PH

110V, 1PH
Sturdy, welded channel iron frame for durability
Double acting cylinder
Quiet, low pressure hydraulic system

$4,264.00

As low as $138/mo

View Details

Clausing 19.7" Electric VS Bench Drill Press w/ Table Tapping KM25EVRS

Tapping capacity in steel: .71" (18mm) maximum
Tapping capacity in cast iron: .87" (22mm) maximum
“EVRS" models are equipped with electronic variable speed and automatic feed reversing system for tapping
Automatic tool ejector

$10,895.00

As low as $354/mo

View Details

Clausing 19.7" Drill Press with GH Manual Feed 3MT 1/1.5 HP Floor w/Auto Feed TLA25

Drilling capacity in steel: 1" (25mm) maximum
Drilling capacity in cast iron: 1.18" (30mm) maximum
Depth scale and adjustable depth stop
Automatic tool ejector

$11,695.00

As low as $380/mo

View Details

Clausing 19.7" Electric VS Bench Drill Press 3/4/1.1 HP Tapping KS25EVRS

Tapping capacity in steel: .71" (18mm) maximum
Tapping capacity in cast iron: .87" (22mm) maximum
“EVRS" models are equipped with electronic variable speed and automatic feed reversing system for tapping
Automatic tool ejector

$10,395.00

As low as $337/mo

View Details

Palmgren 1HP Single Phase 17” 16-Speed Floor Step Pulley Drill Press 9680177

Voltage: 120/240
Amps: 10/5 A
Capacity Cast Iron: 5/8 in
RPM: 138-3476

$1,299.00

As low as $42/mo

View Details

Clausing 19.7" Electric VS Floor Drill Press 3/4/1.1 HP KL25EV

Drilling capacity in steel: 1" (25mm) maximum
Drilling capacity in cast iron: 1.18" (30mm) maximum
“EV" models are equipped with electronic variable speed
Automatic tool ejector

$11,100.00

As low as $360/mo

View Details

Clausing 23.6" Drill Press with Step Pulley Manual Feed 3MT 1.2/1.8 HP Fixed Table 4SZ32

Mounted to a fixed or oversized table offer greater ease in positioning the workpiece and the flexibility to handle bulky or heavy workpieces.
Each drill head on a multiple head drill can be equipped differently to perform the operation required by that head such as... automatic drilling cycle, automatic tapping or any of the equipment offered.
Drilling machines can be set-up with rotating heads adding flexibility
4 head drill press

$58,160.00

As low as $1,150/mo

View Details