Cold Saws

  • Cutting Speed: 3,000 rpm
  • Arbor Bore: 1.97"
  • Factory Wired: 230v/ 460 3-ph
  • Call For Special Pricing

  • 10" Blade 
  • 23/4" Round Tube Capacity at 90º
  • 37/8" Rectangle Capacity at 90º
  • Bronze gears in gearbox, built to last.

  • Max Vise Opening: 6.25"
  • Max Blade: 14"
  • Capacity Round at 90: 4"
  • Capacity Square at 90: 3.75"

  • Automatic CNC hydraulic circular cold saw performing cuts from 0° to 45° to the right and left produced according to the current safety standards.
  • Additional Vice
  • Variable Speed Inverter
  • Stroke feeder material 39”

  • 315mm (12") Ferrous Cold Saw for steel, stainless and tough to cut alloys.
  • Spring loaded whole hand trigger starts or stops the sawing process for easy smooth cutting and increased user safety
  • Two-piece cast iron blade guard system permits quick and easy blade changes without removing the guards
  • Quick clamping cam-action vise with adjustable gib and material support bar for burr-free cutting operations
  • Hardened and ground direct drive worm shaft and bronze worm wheel transmits maximum torque to the saw blade
$3,228.57
$2,599
Save $629.57!

  • Blade Spindle Speeds: 13-89 rpm, infinitely variable
  • Work Height: 35.25"
  • Automatic Feed Lengths: 1/8" - 20" (with 1 feed)
  • Capacity Round at 90 Deg: 4"

  • Tubing 90 Deg Square: 3" x 3"
  • Maximum Diameter Blade: 10-3/4"
  • Pin Spacing: 2/8/45
  • Call For Special Pricing

  • Motor: 2 & 3 HP 230V Three Phase
  • Speed RPM: 40/80
  • Saw Blade Diameter: 14” / 350 mm / Ø 32 mm - 1/14"
  • Span of Vice: 5.315”
$4,869
$4,080
Save $789!

  • Cuts Non-ferrous metals - Blade turns at 3200 rpm
  • 41/4" Capacity
  • Miters left and right
  • 220V, 3PH

  • Maximum vice opening: 100mm (3.9")
  • The NEW 250 DV is to be equipped with a 250mm blade.
  • The NEW 250 DV can run at 2 different speeds: 40-80 R.P.M.
  • Solid Round Cutting at 90 Degrees - 1.50"

  • Maximum Vice Opening: 185mm (7.25")
  • The NTA 370 is to be equipped with a 370mm (14.5") Blade.
  • NTA 370 can run at 2 different speeds: 25-50 R.P.M. (Unless Equipped with Variable Speed Inverter)
  • Electrical: The NTA 370 can be brought in at either 220 Volt / 3 Phase / 60Hz or 480 Volt / 3 Phase / 60Hz.

  • Tubing at 90 Deg Rectangle: 5-1/2" x 4"
  • Maximum Diameter Blade: 14"
  • Pin Spacing: 4/12/64
  • Call For Special Pricing

  • Maximum Diameter Blade: 14"
  • Arbor Bore: 1-9/16"
  • Tubing 90 Deg Round: 4-1/2"
  • Call For Special Pricing

  • Maximum vice opening: 120mm (4.7")
  • The NEW 300 EDV is to be equipped with a 300mm blade.
  • The NEW 300 EDV can run at 2 different speeds: 40-80 R.P.M.
  • Solid Round Cutting at 90 Degrees - 2.0"

  • 2HP / 220V / 3PH
  • 5-1/2" STROKE
  • Recirculation coolant system
  • Adjustable material length stop

  • Max. Blade Diameter:11''
  • Motor: 10hp
  • Power: 220V / 3ph
  • Vice Style: Single Action with Hydraulic Feed

 


  • 14" Blade
  • Miters 45º Left & Right with self centering vice
  • 220V, 3PH
  • 4.33" Round Tube Capacity at 90º

  • Vertical column saw specifically built for production
  • 51/16" Tube Capacity at 90º
  • 4" Square Capacity at 90º
  • Large automatic clamping vise features adjustable gib guides, removeable face plates, and anti-burr arm
$20,575
$19,595
Save $980!

  • Accepts Up To 16" Blade
  • Semi-Automatic Operation
  • Dual Miter Swivel Head
  • Automatic Blade Shut-Off
$16,295
$15,480.25
Save $814.75!

  • Maximum vice opening: 180mm (7")
  • The NTS 370 can run at 2 different speeds: 25-50 R.P.M.
  • Square Tube Cutting at 90° (Straight Cut) - 4.50"
  • Square Tube Cutting at 45° - 3.75"

  • 315MM/12.5" Cold Saw
  • 36RPM
  • Miters Left and Right
  • Self Centering Vise

  • Maximum vice opening: 185mm (7.25")
  • The NTM 350-S can run at 2 different speeds: 33-66 R.P.M.
  • Square Tube Cutting at 90° (Straight Cut) - 3.75"
  • Square Tube Cutting at 45° Right - 3.50"

  • Maximum vice opening: 185mm (7.25")
  • 2 Speeds: 36-72 R.P.M.
  • Square Tube Cutting at 90° (Straight Cut) - 3.75"
  • Square Tube Cutting at 45° Right - 3.50"

  • 10" Cold Saw
  • 42 RPM
  • Miter Left or Right 45 Degrees
  • Enclosed Stand