Cold Saws

• Cutting Speeds (Mild Steel): Variable Speed 11 to 177 rpm
• Round Tube: Up to 3-1/2"
• Round Solid: Up to 1-3/4"
• Call For Special Pricing

• 350mm (14") Ferrous Cold Saw for steel, stainless and tough to cut alloys.
• Spring loaded whole hand trigger starts or stops the sawing process for easy smooth cutting and increased user safety
• Quick tension and release mitering capabilities with stops at 45° right, 45° left, and 90° (center), capable of slotting
• Two-piece cast iron blade guard system permits quick and easy blade changes without removing the guards
• Hardened and ground worm screw and wheel drive gear box operates in an oil bath for added durability

• Maximum vice opening: 160mm (6.3")
• The NTS 315 can run at 2 different speeds: 33-66 R.P.M.
• Square Tube Cutting at 90° (Straight Cut) - 3.50"
• Square Tube Cutting at 45° Right - 3.50"

• 315MM/12.5" Cold Saw
• 36RPM
• Miters Left and Right
• Self Centering Vise

• 14" Blade
• Miters 45º Left & Right with self centering vice
• 220V, 3PH
• 4.33" Round Tube Capacity at 90º

• Vertical column saw specifically built for production
• 5^1/16" Tube Capacity at 90º
• 4" Square Capacity at 90º
• Large automatic clamping vise features adjustable gib guides, removeable face plates, and anti-burr arm

• Accepts Up To 16" Blade
• Semi-Automatic Operation
• Dual Miter Swivel Head
• Automatic Blade Shut-Off

• Motor: 2 & 3 HP 230V Three Phase
• Speed RPM: 40/80
• Saw Blade Diameter: 14” / 350 mm / Ø 32 mm - 1/14"
• Span of Vice: 5.315”

• Automatic CNC hydraulic circular cold saw performing cuts from 0° to 45° to the right and left produced according to the current safety standards.
• Additional Vice
• Variable Speed Inverter
• Stroke feeder material 39”

• 315mm (12") Ferrous Cold Saw for steel, stainless and tough to cut alloys.
• Spring loaded whole hand trigger starts or stops the sawing process for easy smooth cutting and increased user safety
• Two-piece cast iron blade guard system permits quick and easy blade changes without removing the guards
• Quick clamping cam-action vise with adjustable gib and material support bar for burr-free cutting operations
• Hardened and ground direct drive worm shaft and bronze worm wheel transmits maximum torque to the saw blade

• Maximum Vice Opening: 185mm (7.25")
• The NTA 370 is to be equipped with a 370mm (14.5") Blade.
• NTA 370 can run at 2 different speeds: 25-50 R.P.M. (Unless Equipped with Variable Speed Inverter)
• Electrical: The NTA 370 can be brought in at either 220 Volt / 3 Phase / 60Hz or 480 Volt / 3 Phase / 60Hz.

• Cutting Speeds (Mild Steel): 3,000 rpm
• Maximum Saw Blade Diameter: 12-1/2"
• Length Tolerance: + or - 0.006" per index
• Call For Special Pricing

• 230v/460v/60/3 Electricals
• Self-Centering Vise with Angle Scale
• Flood Coolant System
• Two (2) Year Limited Warranty

• 9" Blade
• Manual Feed with Integrated Coolant System
• Miters 45º left
• 110V

• Maximum vice opening: 180mm (7")
• The NTS 370 can run at 2 different speeds: 25-50 R.P.M.
• Square Tube Cutting at 90° (Straight Cut) - 4.50"
• Square Tube Cutting at 45° - 3.75"

The CS-C485SA is a 16-1/2" vertical column cold saw and is a semi automatic machine that uses a Yaskawa® inverter drive to control the saw blade speed up to 120 rpm's. This cold saw comes standard with an industrial grade coolant system, drive motor and hydraulic feeding system that will provide decades of profitable use to any demanding fabrication or machine shop.

• 275mm (10") Ferrous Cold Saw for steel, stainless and tough to cut alloys.
• Spring loaded whole hand trigger starts or stops the sawing process for easy smooth cutting and increased user safety
• Two-piece cast iron blade guard system permits quick and easy blade changes without removing the guards
• Quick clamping cam-action vise with adjustable gib and material support bar for burr-free cutting operations
• Hardened and ground direct drive worm shaft and bronze worm wheel transmits maximum torque to the saw blade

• Solid Round Cutting at 90 Degrees - 2.25"
• Solid Round Cutting at 45 Degrees - 2.25"
• Round Tube Cutting at 90 Degrees - 5.50"
• Round Tube Cutting at 45 Degrees - 5.0"

• Maximum vice opening: 120mm (4.7")
• The NEW 300 EDV is to be equipped with a 300mm blade.
• The NEW 300 EDV can run at 2 different speeds: 40-80 R.P.M.
• Solid Round Cutting at 90 Degrees - 2.0"

• Max Blade: 12"
• Max Vise Opening: 6.25"
• Capacity at 90° Round: 4"
• Capacity at 90° Square: 3.5"

• 3HP / 220V / 3PH
• 6-3/10" STROKE
• Recirculation coolant system
• Adjustable material length stop

• Max Vise Opening: 6.25"
• Max Blade: 14"
• Capacity Round at 90: 4"
• Capacity Square at 90: 3.75"

• Tubing 90 Deg Square: 3" x 3"
• Maximum Diameter Blade: 10-3/4"
• Pin Spacing: 2/8/45
• Call For Special Pricing

• Tubing at 90 Deg Round: 4-1/2" 
• Maximum Diameter Blade: 14"
• Arbor Bore: 1-9/16"
• Call For Special Pricing