Semi-automatic Cold Saws

  • Cutting Speed: 3,000 RPM
  • Arbor Bore: 1.97"
  • Motor Rate: 5.5 hp
  • Steel Surcharge may apply
  • Tubing at 90 Deg Round: 4-1/2"
  • Tubing at 45 Deg Round: 4-1/4"
  • Cutting Speed: 3,000 rpm
  • Steel Surcharge may apply
  • Max Vise Opening: 8"
  • Blade Size: 14"
  • Round at 90 Deg: 4.75"
  • Square at 90 Deg: 4.5"
$12,500.00
$12,095.00
  • Max Blade Diameter: 14.5"
  • Spindle RPM: 18 & 36
  • Capacity Round at 90 Deg: 4" 
  • Capacity Square at 90 Deg: 4"
$12,500.00
$12,095.00
  • Max Blade Diameter: 12.5"
  • Spindle Diameter: 40 mm
  • Capacity Round at 90 Deg: 4"
  • Capacity Square at 90 Deg: 3.25"
$10,900.00
$10,495.00
  • 41/4" Capacity
  • Pneumatic centering vise, hydraulic blade descent
  • Automatic shut-off and vise release
  • 220V, 3PH
$16,975.71
$13,989.00
  • Maximum vice opening: 7"
  • Square Tube Cutting at 90 Degrees - 4.25"
  • Square Tube Cutting at 45 Degrees - 3.75"
  • Rectangular Tube Cutting at 90 Degrees - 7.0"W x 3.75"H
  • Head Rotates 45º Right and 90º Left
  • 3.5/4.5 HP Motor 
  • Blade Size 14-1/2" 
  • Blade Speed 1500-3000fpm
  • Solid Round 90º Capacity 4" 
  • Solid Rectangle 90º 4"x7"
  • Tubing at 45 Deg Square: 4" x 4"
  • Maximum Diameter Blade: 14"
  • Arbor Bore: 1-9/16"
  • Steel Surcharge may apply
  • Maximum vice opening: 180mm (7")
  • The NTS 370 can run at 2 different speeds: 25-50 R.P.M.
  • Square Tube Cutting at 90° (Straight Cut) - 4.50"
  • Square Tube Cutting at 45° - 3.75"
  • Maximum Saw Blade Size Ø: 12”
  • Nominal Current: 5.58 A
  • Power: 3 HP
  • Motor Power:2.4 – 3 HP
  • Saw blade size: 18”
  • Cutting capacity (thickness x width): 2” x 12”/ 3” x 11” / 4” x 10”
  • Saw blade speed: 3200 RPM
  • Motor: 10 HP IE3
  • Vertical column saw specifically built for production
  • 51/16" Tube Capacity at 90º
  • 4" Square Capacity at 90º
  • Large automatic clamping vise features adjustable gib guides, removeable face plates, and anti-burr arm
  • Tubing 90 Deg Square: 3" x 3"
  • Maximum Diameter Blade: 10-3/4"
  • Pin Spacing: 2/8/45
  • Steel Surcharge may apply
  • 230v/460v/60/3 Electricals
  • Self-Centering Vise with Angle Scale
  • Flood Coolant System
  • Two (2) Year Limited Warranty

The CS-C485SA is a 16-1/2" vertical column cold saw and is a semi automatic machine that uses a Yaskawa® inverter drive to control the saw blade speed up to 120 rpm's. This cold saw comes standard with an industrial grade coolant system, drive motor and hydraulic feeding system that will provide decades of profitable use to any demanding fabrication or machine shop.

$36,255.71
$29,869.00
  • Max Blade Diameter: 14.5"
  • Infinitely Variable: 13-76 
  • Capacity Round at 90 Deg: 4"
  • Capacity Square at 90 Deg: 4"
$16,995.00
$16,495.00
  • Speeds 4861
  • Blade Size 17.71" 
  • Motor .75HP 
  • Max. Tooth Height .314"
$23,505.71
$19,359.00
  • Accepts Up To 17" Blade
  • Semi-Automatic Operation
  • Dual Miter Swivel Head
  • Tool Gap Compensation Device
$30,161.43
$24,849.00
  • Maximum vice opening: 185mm (7.25")
  • The NTM 350-S can run at 2 different speeds: 33-66 R.P.M.
  • Square Tube Cutting at 90° (Straight Cut) - 3.75"
  • Square Tube Cutting at 45° Right - 3.50"
  • 11" Blade
  • Semi-Automatic operation - manual feed also available
  • Self centering vice
  • 2.75" Tube Capacity 
$10,121.43
$8,345.00
  • Maximum Vice Opening: 120mm (4.70")
  • The NEW 350-S can run at 2 different speeds: 40-80 R.P.M.
  • The NEW 350-S is to be equipped with a 350mm (14") Blade.
  • Electrical: The NEW 350-S can be brought in at either 220 Volt / 3 Phase / 60Hz or 480 Volt / 3 Phase / 60Hz.
  • Maximum Saw Blade Size Ø: 10"
  • Nominal Current: 4.7 A
  • Power: 2.5 HP
  • Motor Power: 1.75 – 2.5 HP
  • Saw blade size: 20” / 22” / 24” (standard)
  • Cutting capacity (thickness x width): 2” x 21”/ 4” x 19” / 6” x 15” / 8” x 8”
  • Saw blade speed: 2400 RPM
  • Motor: 15 HP IE3