By Category

Hoists & Cranes

  • Layout
MPI 6”x18” 100N Holding Force Rare Earth Surface Grinder Permanent Magnetic Chuck SGC-150450-REN at Elite Metal Tools
MPI 6”x18” 100N Holding Force Rare Earth Surface Grinder Permanent Magnetic Chuck SGC-150450-REN
  • Chuck Dimensions: 6” x 18”
  • Holding Force: 100N/cm² / 145lbs/in²
  • Min Workpiece Size: 0.02” x 0.02” x 0.04”  
  • Regrinding Limit: 7mm / 0.275”
$2,339.00
$1,994.00
As low as $64/mo
View Details
MPI 8”x24” 100N Holding Force Rare Earth Surface Grinder Permanent Magnetic Chuck SGC-200600-REN at Elite Metal Tools
MPI 8”x24” 100N Holding Force Rare Earth Surface Grinder Permanent Magnetic Chuck SGC-200600-REN
  • Chuck Dimensions: 8” x 24”
  • Holding Force: 100N/cm² / 145lbs/in²
  • Min Workpiece Size: 0.02” x 0.02” x 0.04”  
  • Regrinding Limit: 7mm / 0.275”
$3,925.00
$3,362.00
As low as $109/mo
View Details
Jet 1-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift | TS100-460-015 144005 at Elite Metal Tools
Jet 1-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift | TS100-460-015 144005
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
$8,324.00
$5,221.00
As low as $169/mo
View Details
Jet 3-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift | TS300-230-20 140118 at Elite Metal Tools
Jet 3-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift | TS300-230-20 140118
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
$14,015.00
$8,789.99
As low as $285/mo
View Details
Jet 1/2-Ton Aluminum Hand Chain Hoist with 10ft of lift | AL100-050-10 133051 at Elite Metal Tools
Jet 1/2-Ton Aluminum Hand Chain Hoist with 10ft of lift | AL100-050-10 133051
  • Extra large hand chain opening for side chain pulling
  • Sealed housing to provide extra protection against the elements
  • Complies with ANSI/ASME B30.16 and HAST-2 Standards
  • Cast steel safety latches
  • Dual pawl Weston style brake
$582.00
$411.00
View Details
Jet 10-Ton Hand Chain Hoist with 30' Lift & Overload Protection | L-100-1000WO-30 209130 at Elite Metal Tools
Jet 10-Ton Hand Chain Hoist with 30' Lift & Overload Protection | L-100-1000WO-30 209130
  • Double sealed ball bearings support the load sheave to increase efficiency and promote smooth operation
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
$5,794.00
$3,701.58
As low as $120/mo
View Details
Jet HD-3T, 3-Ton Wide Beam Clamp 202730 at Elite Metal Tools
Jet HD-3T, 3-Ton Wide Beam Clamp 202730
  • Clamp jaw is designed to distribute the load away from the beam flange edge
  • Clamp jaw is designed to distribute the load away from the beam flange edge, increasing safety
  • Complies with ANSI / ASME B30.17 and B30.20 standards
  • Load tested to 125% of capacity with certificate
  • Used for quick mounting of a hoist on a broad range of beams up to 12-3/5 inches wide for increased versatility
$226.00
$163.00
View Details
Jet JLP-300A-10, 3 Ton Lever Hoist with 10' Lift 287501 at Elite Metal Tools
Jet JLP-300A-10, 3 Ton Lever Hoist with 10' Lift 287501
  • Grade 80 black oxide coated load chain for added durability
  • Impact resistant all steel construction for added durability and protection
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
  • JET’s improved easy free chain design is a two-step, no load, free chaining system. The system permits quicker hoist positioning and take up of slack chain, and is engineered not to free chain under load
$774.00
$516.00
As low as $16/mo
View Details
MPI 6”x18” 160N Holding Force Rare Earth Compact Milling Permanent Magnetic Chuck CMC-150450-REN at Elite Metal Tools
MPI 6”x18” 160N Holding Force Rare Earth Compact Milling Permanent Magnetic Chuck CMC-150450-REN
  • Chuck Dimensions: 6” x 18”
  • Holding Force: 160N/cm² / 232lbs/in²
  • Min Workpiece Size: 0.984” x 0.984” x 0.236”
  • Regrinding Limit: 10mm / 0.393”
$2,205.00
$2,148.00
As low as $69/mo
View Details
Jet VOLT 3T Variable-Speed Electric Hoist 3PH 230V 20' Lift 183230 at Elite Metal Tools
Jet VOLT 3T Variable-Speed Electric Hoist 3PH 230V 20' Lift 183230
  • Electromagnetic brake design is an industry-proven safety feature that secures the load even if power is interrupted to the hoist
  • Eliminates bump-firing when positioning the work piece reducing downtime and maintenance
  • Heavy-duty nylon chain bag with reinforcing metal brackets included
  • Industry proven Grade 80 black oxide coated load chain
  • JET VOLT and SSC Series Electric Hoists and JET ET Series Electric Trolleys are not rated or designed for outdoor use or wet environments
$10,811.00
$6,893.99
As low as $224/mo
View Details
Jet JG-75, 3/4 Ton Grip Puller Without Cable 286575 at Elite Metal Tools
Jet JG-75, 3/4 Ton Grip Puller Without Cable 286575
  • A double sealed ratchet brake system increases safety on the jobsite
  • Available in 3/4, 1-1/2 and 3-Ton pulling capacities
  • Designed to lift, lower, stretch or pull heavy loads
  • Double Sealed Ratchet Brake System
  • Lightweight zinc coated steel is used to resist corrosion
$506.00
$317.99
View Details
Bison Lifting Equipment 1/4 Ton Single Phase Electric Lifting Chain Hoist HH-B025 at Elite Metal Tools
Bison Lifting Equipment 1/4 Ton Single Phase Electric Lifting Chain Hoist HH-B025
  • 1/4 Ton Lifting Capacity
  • 20 Ft Standard lift
  • H3 Classification
  • Electromagnetic load brake
$2,226.00
$2,003.00
As low as $65/mo
View Details
Jet VOLT 3T Variable-Speed Electric Hoist 3PH 230V 10' Lift 183310 at Elite Metal Tools
Jet VOLT 3T Variable-Speed Electric Hoist 3PH 230V 10' Lift 183310
  • Electromagnetic brake design is an industry-proven safety feature that secures the load even if power is interrupted to the hoist
  • Eliminates bump-firing when positioning the work piece reducing downtime and maintenance
  • Heavy-duty nylon chain bag with reinforcing metal brackets included
  • Industry proven Grade 80 black oxide coated load chain
  • JET VOLT and SSC Series Electric Hoists and JET ET Series Electric Trolleys are not rated or designed for outdoor use or wet environments
$9,726.00
$6,201.00
As low as $201/mo
View Details
Jet JLP-075A-5, 3/4 Ton Lever Hoist, 5' Lift 287300 at Elite Metal Tools
Jet JLP-075A-5, 3/4 Ton Lever Hoist, 5' Lift 287300
  • Grade 80 black oxide coated load chain for added durability
  • Impact resistant all steel construction for added durability and protection
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
  • JET’s improved easy free chain design is a two-step, no load, free chaining system. The system permits quicker hoist positioning and take up of slack chain, and is engineered not to free chain under load
$434.00
$284.58
View Details
Jet JG-75A, 3/4 Ton Grip Puller with Cable 286575K at Elite Metal Tools
Jet JG-75A, 3/4 Ton Grip Puller with Cable 286575K
  • Double sealed ratchet brake system increases safety on the jobsite
  • Available in 3/4, 1-1/2 and 3-Ton pulling capacities
  • Designed to lift, lower, stretch, or pull heavy loads
  • Double Sealed Ratchet Brake System
  • Lightweight zinc coated steel is used to resist corrosion
$758.00
$508.00
As low as $16/mo
View Details
Jet TS500-460-015,5-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift, MT500-4 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 11ft 144014K at Elite Metal Tools
Jet TS500-460-015,5-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift, MT500-4 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 11ft 144014K
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
  • 5 Pocket Chain Sprocket provides reduced vibration, smoother operation, and reduced chain wear during long lifting or lowering of loads
$18,610.00
$11,671.00
As low as $379/mo
View Details
Jet 5-Ton Two Speed Electric Chain Hoist 3-Phase 10' Lift | TS500-460-010 144013 at Elite Metal Tools
Jet 5-Ton Two Speed Electric Chain Hoist 3-Phase 10' Lift | TS500-460-010 144013
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
$15,794.00
$9,905.00
As low as $321/mo
View Details
Jet 1-1/2-Ton Hand Chain Hoist with 15ft of Lift | AL100-150-15 133122 at Elite Metal Tools
Jet 1-1/2-Ton Hand Chain Hoist with 15ft of Lift | AL100-150-15 133122
  • Extra large hand chain opening for side chain pulling
  • Sealed housing to provide extra protection against the elements
  • Complies with ANSI/ASME B30.16 and HAST-2 Standards
  • Cast steel safety latches
  • Dual pawl Weston style brake
$860.00
$551.99
As low as $17/mo
View Details
Jet 1/4-Ton Electric Chain Hoist 1-Phase 10' Lift | JSH-550-10 110110 at Elite Metal Tools
Jet 1/4-Ton Electric Chain Hoist 1-Phase 10' Lift | JSH-550-10 110110
  • Aluminum Housing- Aluminum alloy housing decreases the weight for convenient transportation
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
  • Heat Treated Gears- Heat treated alloy steel geared drive train for long lasting durability
  • JET VOLT and SSC Series Electric Hoists and JET ET Series Electric Trolleys are not rated or designed for outdoor use or wet environments
  • Limit Switches- Upper and lower limiting switches increase safety by preventing the load chain from over traveling
$2,950.00
$1,885.00
As low as $61/mo
View Details
MPI 12” 160N Holding Force Rare Earth Round Permanent Magnetic Chuck MAX-300-REN at Elite Metal Tools
MPI 12” 160N Holding Force Rare Earth Round Permanent Magnetic Chuck MAX-300-REN
  • Chuck Diameter: 12”
  • Holding Force: 160N/cm² / 232lbs/in²
  • Min Workpiece Size: 40mm x 8mm / 1.57” x 0.314”
  • Regrinding Limit: 10mm / 0.393”
$3,200.00
$2,870.00
As low as $93/mo
View Details
Jet 1/2-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift | TS050-230-020 140235 at Elite Metal Tools
Jet 1/2-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift | TS050-230-020 140235
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
$6,834.00
$4,286.00
As low as $139/mo
View Details
Magswitch CE11000 Cordless Electric 11000 Pound Breakaway Force Magnetic Lifter 8140980 at Elite Metal Tools
Magswitch CE11000 Cordless Electric 11000 Pound Breakaway Force Magnetic Lifter 8140980
  • Maximum Breakaway Force: 33,070 lb / 15,000 kg
  • Breakaway Force (@ SWL 3:1): 11,000 lb / 5,000 kg
  • Number of Cycles per Charge: 300
  • Hold Surface (LxW): 26.7” x 15”
$12,499.00
As low as $406/mo
View Details
Jet JLP-150A-5SH, 1-1/2 Ton Lever Hoist, 5' Lift & Shipyard Hooks 287700 at Elite Metal Tools
Jet JLP-150A-5SH, 1-1/2 Ton Lever Hoist, 5' Lift & Shipyard Hooks 287700
  • All steel construction
  • Impact resistant all steel construction for added durability and protection
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
  • JET’s improved easy free chain design is a two-step, no load, free chaining system. The system permits quicker hoist positioning and take up of slack chain, and is engineered not to free chain under load
  • NEW! Redesigned ergonomic grip allows for greater operator control and increased comfort
$548.00
$399.00
View Details
Jet 3SS-3C-10, 3-Ton Electric Chain Hoist 3-Phase 10' Lift 331000 at Elite Metal Tools
Jet 3SS-3C-10, 3-Ton Electric Chain Hoist 3-Phase 10' Lift 331000
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
  • Limit Switches- Upper and lower limiting switches increase safety by preventing the load chain from over traveling
$7,023.00
$4,479.99
As low as $145/mo
View Details