Magnetic Chucks

  • Layout
MPI 32” 140N Holding Force Double Rare Earth Round Permanent Magnetic Chuck RC-800-REN at Elite Metal Tools
MPI 32” 140N Holding Force Double Rare Earth Round Permanent Magnetic Chuck RC-800-REN
  • Chuck Diameter: 32”
  • Holding Force: 140N/cm² / 203lbs/in²
  • Min Workpiece Size: 35mm / 1.377”
  • Regrinding Limit: 5mm / 0.2”
$24,860.00
$22,279.00
As low as $440/mo
View Details
MPI 20” 140N Holding Force Double Rare Earth Round Permanent Magnetic Chuck RC-500-REN at Elite Metal Tools
MPI 20” 140N Holding Force Double Rare Earth Round Permanent Magnetic Chuck RC-500-REN
  • Chuck Diameter: 20”
  • Holding Force: 140N/cm² / 203lbs/in²
  • Min Workpiece Size: 35mm / 1.377”
  • Regrinding Limit: 5mm / 0.2”
$10,046.00
$8,999.00
As low as $292/mo
View Details
MPI 10”x20” 90N Holding Force Electromagnet Longitudinal Pole Surface Grinding Chuck EMLP-250500-SCG at Elite Metal Tools
MPI 10”x20” 90N Holding Force Electromagnet Longitudinal Pole Surface Grinding Chuck EMLP-250500-SCG
  • Chuck Size: 10” x 20”
  • Holding force: 90N/cm² / 130lbs/in²
  • Min Workpiece Size: 25mm x 25mm x 3mm / 1” x 1” x 0.12”
  • Regrinding limit: 6mm / 0.236”
$5,676.00
$5,175.00
As low as $168/mo
View Details
MPI 10”x24” 90N Holding Force Electromagnet Longitudinal Pole Surface Grinding Chuck EMLP-250600-SGC at Elite Metal Tools
MPI 10”x24” 90N Holding Force Electromagnet Longitudinal Pole Surface Grinding Chuck EMLP-250600-SGC
  • Chuck Size: 10” x 24”
  • Holding force: 90N/cm² / 130lbs/in²
  • Min Workpiece Size: 25mm x 25mm x 3mm / 1” x 1” x 0.12”
  • Regrinding limit: 6mm / 0.236”
$5,891.00
$5,499.00
As low as $178/mo
View Details
MPI 12”x24” 90N Holding Force Electromagnet Longitudinal Pole Surface Grinding Chuck EMLP-300600-SGC at Elite Metal Tools
MPI 12”x24” 90N Holding Force Electromagnet Longitudinal Pole Surface Grinding Chuck EMLP-300600-SGC
  • Chuck Size: 12” x 24”
  • Holding force: 90N/cm² / 130lbs/in²
  • Min Workpiece Size: 25mm x 25mm x 3mm / 1” x 1” x 0.12”
  • Regrinding limit: 6mm / 0.236”
$6,418.00
$5,899.00
As low as $191/mo
View Details
MPI 24” 140N Holding Force Double Rare Earth Round Permanent Magnetic Chuck RC-600-REN at Elite Metal Tools
MPI 24” 140N Holding Force Double Rare Earth Round Permanent Magnetic Chuck RC-600-REN
  • Chuck Diameter: 24”
  • Holding Force: 140N/cm² / 203lbs/in²
  • Min Workpiece Size: 35mm / 1.377”
  • Regrinding Limit: 5mm / 0.2”
$14,237.00
$12,775.00
As low as $415/mo
View Details
MPI 16” 140N Holding Force Double Rare Earth Round Permanent Magnetic Chuck RC-400-REN at Elite Metal Tools
MPI 16” 140N Holding Force Double Rare Earth Round Permanent Magnetic Chuck RC-400-REN
  • Chuck Diameter: 16”
  • Holding Force: 140N/cm² / 203lbs/in²
  • Min Workpiece Size: 35mm / 1.377”
  • Regrinding Limit: 5mm / 0.2”
$7,907.00
$6,999.00
As low as $227/mo
View Details
MPI 12” 140N Holding Force Double Rare Earth Round Permanent Magnetic Chuck RC-300-REN at Elite Metal Tools
MPI 12” 140N Holding Force Double Rare Earth Round Permanent Magnetic Chuck RC-300-REN
  • Chuck Diameter: 12”
  • Holding Force: 140N/cm² / 203lbs/in²
  • Min Workpiece Size: 35mm / 1.377”
  • Regrinding Limit: 5mm / 0.2”
$4,033.00
$3,555.00
As low as $115/mo
View Details
MPI 12”x24” 100N Holding Force Rare Earth Surface Grinder Permanent Magnetic Chuck SGC-300600-REN at Elite Metal Tools
MPI 12”x24” 100N Holding Force Rare Earth Surface Grinder Permanent Magnetic Chuck SGC-300600-REN
  • Chuck Dimensions: 12” x 24”
  • Holding Force: 100N/cm² / 145lbs/in²
  • Min Workpiece Size: 0.02” x 0.02” x 0.04”  
  • Regrinding Limit: 7mm / 0.275”
$5,990.00
$5,095.00
As low as $165/mo
View Details
MPI 5” 140N Holding Force Double Rare Earth Round Permanent Magnetic Chuck RC-130-REN at Elite Metal Tools
MPI 5” 140N Holding Force Double Rare Earth Round Permanent Magnetic Chuck RC-130-REN
  • Chuck Diameter: 5”
  • Holding Force: 140N/cm² / 203lbs/in²
  • Min Workpiece Size: 35mm / 1.377”
  • Regrinding Limit: 5mm / 0.2”
$1,850.00
$1,595.00
As low as $51/mo
View Details
MPI 6” 140N Holding Force Double Rare Earth Round Permanent Magnetic Chuck RC-150-REN at Elite Metal Tools
MPI 6” 140N Holding Force Double Rare Earth Round Permanent Magnetic Chuck RC-150-REN
  • Chuck Diameter: 6”
  • Holding Force: 140N/cm² / 203lbs/in²
  • Min Workpiece Size: 35mm / 1.377”
  • Regrinding Limit: 5mm / 0.2”
$1,865.00
$1,615.00
As low as $52/mo
View Details
MPI 28” 140N Holding Force Double Rare Earth Round Permanent Magnetic Chuck RC-700-REN at Elite Metal Tools
MPI 28” 140N Holding Force Double Rare Earth Round Permanent Magnetic Chuck RC-700-REN
  • Chuck Diameter: 28”
  • Holding Force: 140N/cm² / 203lbs/in²
  • Min Workpiece Size: 35mm / 1.377”
  • Regrinding Limit: 5mm / 0.2”
$17,822.00
$15,965.00
As low as $315/mo
View Details
MPI 10”x20” 100N Holding Force Rare Earth Surface Grinder Permanent Magnetic Chuck SGC-250500-REN at Elite Metal Tools
MPI 10”x20” 100N Holding Force Rare Earth Surface Grinder Permanent Magnetic Chuck SGC-250500-REN
  • Chuck Dimensions: 10” x 20”
  • Holding Force: 100N/cm² / 145lbs/in²
  • Min Workpiece Size: 0.02” x 0.02” x 0.04”  
  • Regrinding Limit: 7mm / 0.275”
$4,722.00
$4,025.00
As low as $130/mo
View Details
MPI 10”x20” 110N Holding Force Electromagnet Transverse Fine Pole Surface Grinding Chuck EMTP-250500-SGC at Elite Metal Tools
MPI 10”x20” 110N Holding Force Electromagnet Transverse Fine Pole Surface Grinding Chuck EMTP-250500-SGC
  • Chuck Size: 10” x 20”
  • Holding force: 110N/cm² / 159lbs/in²
  • Min. Workpiece Size: 25mm x 25mm x 3mm / 1" x 1" x .12"
  • Regrinding limit: 6 mm / .236"
$6,202.00
$5,599.00
As low as $181/mo
View Details
MPI 10” 140N Holding Force Double Rare Earth Round Permanent Magnetic Chuck RC-250-REN at Elite Metal Tools
MPI 10” 140N Holding Force Double Rare Earth Round Permanent Magnetic Chuck RC-250-REN
  • Chuck Diameter: 10”
  • Holding Force: 140N/cm² / 203lbs/in²
  • Min Workpiece Size: 35mm / 1.377”
  • Regrinding Limit: 5mm / 0.2”
$3,123.00
$2,755.00
As low as $89/mo
View Details
MPI 6”x12” 90N Holding Force Electromagnet Longitudinal Pole Surface Grinding Chuck EMLP-150300-SCG at Elite Metal Tools
MPI 6”x12” 90N Holding Force Electromagnet Longitudinal Pole Surface Grinding Chuck EMLP-150300-SCG
  • Chuck Size: 6” x 12”
  • Holding force: 90N/cm² / 130lbs/in²
  • Min Workpiece Size: 25mm x 25mm x 3mm / 1” x 1” x 0.12”
  • Regrinding limit: 6mm / 0.236”
$2,211.00
$1,975.00
As low as $64/mo
View Details
MPI 14” 140N Holding Force Double Rare Earth Round Permanent Magnetic Chuck RC-350-REN at Elite Metal Tools
MPI 14” 140N Holding Force Double Rare Earth Round Permanent Magnetic Chuck RC-350-REN
  • Chuck Diameter: 14”
  • Holding Force: 140N/cm² / 203lbs/in²
  • Min Workpiece Size: 35mm / 1.377”
  • Regrinding Limit: 5mm / 0.2”
$5,826.00
$5,090.00
As low as $165/mo
View Details
MPI 8”x18” 110N Holding Force Electromagnet Transverse Fine Pole Surface Grinding Chuck EMTP-200450-SGC at Elite Metal Tools
MPI 8”x18” 110N Holding Force Electromagnet Transverse Fine Pole Surface Grinding Chuck EMTP-200450-SGC
  • Chuck Size: 8” x 18”
  • Holding force: 110N/cm² / 159lbs/in²
  • Min. Workpiece Size: 25mm x 25mm x 3mm / 1" x 1" x .12"
  • Regrinding limit: 6 mm / .236"
$4,842.00
$4,499.00
As low as $146/mo
View Details
MPI 6”x18” 110N Holding Force Electromagnet Transverse Fine Pole Surface Grinding Chuck EMTP-150450-SGC at Elite Metal Tools
MPI 6”x18” 110N Holding Force Electromagnet Transverse Fine Pole Surface Grinding Chuck EMTP-150450-SGC
  • Chuck Size: 6” x 18”
  • Holding force: 110N/cm² / 159lbs/in²
  • Min. Workpiece Size: 25mm x 25mm x 3mm / 1" x 1" x .12"
  • Regrinding limit: 6 mm / .236"
$3,946.00
$3,599.00
As low as $116/mo
View Details
MPI Dymax 6”x12” 120N Holding Force Rare Earth Surface Grinder Permanent Magnetic Chuck D-150300-REN at Elite Metal Tools
MPI Dymax 6”x12” 120N Holding Force Rare Earth Surface Grinder Permanent Magnetic Chuck D-150300-REN
  • Chuck Dimensions: 6” x 12”
  • Holding Force: 120N/cm² / 174lbs/in²
  • Min Workpiece Size: 0.393” x 0.393” x .196”
  • Regrinding Limit: 6mm / 0.236”
$3,238.00
$2,475.00
As low as $80/mo
View Details
MPI 6” 160N Holding Force Rare Earth Round Permanent Magnetic Chuck MAX-155-REN at Elite Metal Tools
MPI 6” 160N Holding Force Rare Earth Round Permanent Magnetic Chuck MAX-155-REN
  • Chuck Diameter: 6”
  • Holding Force: 160N/cm² / 232lbs/in²
  • Min Workpiece Size: 40mm x 8mm / 1.57” x 0.314”
  • Regrinding Limit: 10mm / 0.393”
$2,169.00
$1,875.00
As low as $60/mo
View Details
MPI 8”x18” 100N Holding Force Rare Earth Surface Grinder Permanent Magnetic Chuck SGC-200450-REN at Elite Metal Tools
MPI 8”x18” 100N Holding Force Rare Earth Surface Grinder Permanent Magnetic Chuck SGC-200450-REN
  • Chuck Dimensions: 8” x 18”
  • Holding Force: 100N/cm² / 145lbs/in²
  • Min Workpiece Size: 0.02” x 0.02” x 0.04”  
  • Regrinding Limit: 7mm / 0.275”
$3,423.00
$2,875.00
As low as $93/mo
View Details
MPI 8”x18” 90N Holding Force Electromagnet Longitudinal Pole Surface Grinding Chuck EMLP-200450-SCG at Elite Metal Tools
MPI 8”x18” 90N Holding Force Electromagnet Longitudinal Pole Surface Grinding Chuck EMLP-200450-SCG
  • Chuck Size: 8” x 18”
  • Holding force: 90N/cm² / 130lbs/in²
  • Min Workpiece Size: 25mm x 25mm x 3mm / 1” x 1” x 0.12”
  • Regrinding limit: 6mm / 0.236”
$3,523.00
$3,135.00
As low as $101/mo
View Details
MPI 12”x32” 110N Holding Force Electromagnet Transverse Fine Pole Surface Grinding Chuck EMTP-300800-SGC at Elite Metal Tools
MPI 12”x32” 110N Holding Force Electromagnet Transverse Fine Pole Surface Grinding Chuck EMTP-300800-SGC
  • Chuck Size: 12” x 32”
  • Holding force: 110N/cm² / 159lbs/in²
  • Min. Workpiece Size: 25mm x 25mm x 3mm / 1" x 1" x .12"
  • Regrinding limit: 6 mm / .236"
$10,219.00
$9,399.00
As low as $305/mo
View Details