Hoists & Cranes

  • 24 volt push button controller with cable strain relief system for durability and reliability
  • 4 button controller for electric hoist or trolley feature 4-pin quick connect plugs
  • Complies with NEMA 4X standards
  • NEMA 4x-rated control pendant
  • Push button controller with cable strain relief system for durability and reliability
MSRP: $228
$165

  • 1/4 Ton Lifting Capacity
  • 20 Ft Standard lift
  • H3 Classification
  • Electromagnetic load brake
MSRP: $2,780
$2,501.50
As low as $81.29/mo

  • Main AC Input Voltage: 230V
  • Watt Capacity: 630W
  • Output DC Voltage: 110Hz
  • Mains Frequency: 50/60Hz
MSRP: $1,956
$1,846
As low as $59.99/mo

  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
  • Limit Switches- Upper and lower limiting switches increase safety by preventing the load chain from over traveling
MSRP: $7,702
$4,915
As low as $159.73/mo

  • Chuck Dimensions: 8” x 20”
  • Holding Force: 100N/cm² / 145lbs/in²
  • Min Workpiece Size: 0.02” x 0.02” x 0.04”  
  • Regrinding Limit: 7mm / 0.275”
MSRP: $3,713
$3,204
As low as $104.13/mo

  • 24 volt push button controller with cable strain relief system for durability and reliability
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
MSRP: $5,524
$3,520
As low as $114.40/mo

  • Built-in bumper guards on the side plates increase safety and extend trolley life
  • Complies with OSHA Regulations, ANSI / ASME B30.11 and B30.17 standards
  • Easily adjustable to wide-flange H-beams, standard I-beams, or curved track with the included spacer washers
  • Hardened steel wheels and double sealed lubricated ball bearings provide smooth movement
  • Welded all-steel frame and powder coat finish provide maximum durability and protection
MSRP: $336
$220

  • 1 Ton Lifting Capacity
  • 20 Ft Standard lift
  • H4 Classification
  • Dual Lifting Speed
MSRP: $5,300
$4,769.84
As low as $155.01/mo

  • Chuck Size: 6” x 18”
  • Holding force: 110N/cm² / 159lbs/in²
  • Min. Workpiece Size: 25mm x 25mm x 3mm / 1" x 1" x .12"
  • Regrinding limit: 6 mm / .236"
MSRP: $3,946
$3,615
As low as $117.48/mo

  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
  • Limit Switches- Upper and lower limiting switches increase safety by preventing the load chain from over traveling
MSRP: $4,794
$3,062
As low as $99.51/mo

  • Chuck Dimensions: 10” x 20”
  • Holding Force: 100N/cm² / 145lbs/in²
  • Min Workpiece Size: 0.02” x 0.02” x 0.04”  
  • Regrinding Limit: 7mm / 0.275”
MSRP: $4,722
$4,032
As low as $131.04/mo

  • Chuck Dimensions: 6” x 12”
  • Holding Force: 120N/cm² / 174lbs/in²
  • Min Workpiece Size: 0.393” x 0.393” x .196”
  • Regrinding Limit: 6mm / 0.236”
MSRP: $3,238
$2,586
As low as $84.04/mo

  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
  • Limit Switches- Upper and lower limiting switches increase safety by preventing the load chain from over traveling
MSRP: $10,230
$6,528
As low as $212.16/mo

  • Heavy-Duty motor puts out up to 0.8HP making it the strongest in it's class
  • TAA Approved
  • Two speeds reduces bump firing to while still allowing high speed movement of materials
  • Indoor and Outdoor use with IP-55 rating for trolley and IP-65 rating for the pendant
  • Expanded flange capacity kits are available
MSRP: $3,438
$2,156.99
As low as $70.10/mo

  • A double sealed ratchet brake system increases safety on the jobsite
  • Available in 3/4, 1-1/2 and 3-Ton pulling capacities
  • Designed to lift, lower, stretch or pull heavy loads
  • Double Sealed Ratchet Brake System
  • Lightweight zinc coated steel is used to resist corrosion
MSRP: $1,072
$669
As low as $21.74/mo

  • Chuck Size: 8” x 18”
  • Holding force: 90N/cm² / 130lbs/in²
  • Min Workpiece Size: 25mm x 25mm x 3mm / 1” x 1” x 0.12”
  • Regrinding limit: 6mm / 0.236”
MSRP: $3,523
$3,242
As low as $105.36/mo

  • Grade 80 black oxide coated load chain for added durability
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
MSRP: $788
$524
As low as $17.03/mo

  • Chuck Dimensions: 12” x 24”
  • Holding Force: 160N/cm² / 232lbs/in²
  • Min Workpiece Size: 0.984” x 0.984” x 0.236”
  • Regrinding Limit: 10mm / 0.393”
MSRP: $4,948
$4,813
As low as $156.42/mo

  • 1 Ton Lifting Capacity
  • 20 Ft Standard lift
  • Premium Galvanized load Chain
  • Double-Pawl Load Brake
$409.86

  • Extra large hand chain opening for side chain pulling
  • Sealed housing to provide extra protection against the elements
  • Complies with ANSI/ASME B30.16 and HAST-2 Standards
  • Cast steel safety latches
  • Dual pawl Weston style brake
MSRP: $1,161
$739.99
As low as $24.04/mo

  • Grade 80 black oxide coated load chain for added durability
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
MSRP: $296
$199

  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
  • Limit Switches- Upper and lower limiting switches increase safety by preventing the load chain from over traveling
MSRP: $7,585
$4,839.99
As low as $157.29/mo

  • Double sealed ratchet brake system increases safety on the jobsite
  • Available in 3/4, 1-1/2 and 3-Ton pulling capacities
  • Designed to lift, lower, stretch, or pull heavy loads
  • Double Sealed Ratchet Brake System
  • Lightweight zinc coated steel is used to resist corrosion
MSRP: $999
$638.99
As low as $20.76/mo

  • Comes standard with Wireless Controller that can infinitely adjust speed from creep to 4ft/min with speed dial and max of 41ft/min in high speed
  • TAA Approved
  • Single phase 120V plug enables use in all areas and the Permanent Magnet Brushless Motor has the lowest required starting current available at just 10amp.
  • Overload protection using slip clutch system to protect hoist from loads over rated capacities
  • DC Brushless motor designed for a longer lifespan than normal Electric Hoist motors reducing maintenance costs
MSRP: $5,982
$3,752.18
As low as $121.94/mo