MPI 230V 630W Capacity Electromagnet Control Unit with U19 Remote Control EMCU-630W

Description

Electromagnet Chuck Control Units are designed to magnetize and demagnetize electromagnetic devices such as electromagnetic chucks and lifters. Magnetization consists of supplying a continuous DC output voltage to the device. Demagnetization cycles consist of a specific combination of positive and negative voltage pulse(s). The workpiece material may retain some residual magnetism due to its chemical and magnetic properties. The control units are designed to operate any 110V DC magnetic device within the specified wattage.

MPI’s Electromagnet Control Unit features an SR interlock safety contact. By using a potential free relay contact. By using a potential free relay contact driven by the machine’s PLC, the controls can be enabled or disabled. The safety contact closes when the magnetic device is properly magnetized and should be used to enable the operation of the connected machine. A 24V signal on E-X3-10 of the control board provides a warning signal to disable the control unit. The safety control unit feature should be engaged during machining or transport.

Features

• Clamping force control for higher accuracy and colder operation
• Demagnetization of the chuck and workpiece for easy unclamping
• Powerful control system with a microprocessor
• Two Design Options
  • Metal Box (IP54 – stock)
  • Panel (IP00 – special order)

Specifications

• Main AC Input Voltage: 230V
• Watt Capacity: 630W
• Output DC Voltage: 110Hz
• Mains Frequency: 50/60Hz
• Operating Temperature: 32-122°F
• Maximum Relative Humidity: 90%
• Maximum Working Altitude: 3,280ft
• Cabinet Protection Class: IP66
• Required Circuit Breaker: 10A C curve
• Required Cable: 3 G 2.5

Options

• Other electrical options available – please contact a sales representative for more information

Cable between electrical grid and control unit is not supplied – make sure to follow required cable specifications