Heating & Cooling

  • Amp: 18 A
  • BTU: 51195
  • Temperature Range: 40° to 100° F
  • Temperature Rise: 45°
$2,507.00
$1,604.48

  • 60,000 BTU/H – 5 Ton capacity air-cooled
  • Runs on 1PH 230V 60-amp circuit
  • Internal high lift condensate pumps and a 5- gallon reservoir tank
  • Three fan speeds
$13,995.00
$10,496.25

  • Effective Volume: 52,970 cu.ft
  • Typical Extraction: 285 ppd
  • Airflow: 1,750 CFM
  • Power Supply: 3680W, 60 Hz, 440V Three Phase
$11,491.00
$10,595.00

  • Fire Rate (BTU/HR): 80,000
  • Heat Exchanger Length: 30 ft
  • Electric Supply: 120 V AC, 60 HZ, 1 Amp: 36” cord, grounded 3 prong plug
  • Flue and Outside Air Connection: 4” O.D. connection for flue adapter provided at the heater
$2,705.00
$2,164.00

  • Process Airflow - Dry Air: 136 CFM
  • Regen Airflow - Wet Air: 42 CFM
  • Typical Extraction @ 27°C 60%: 69 ppd
  • Power Supply: 1400W, 60 Hz, 110V Single Phase
$3,958.00
$3,725.00

  • High Fire Rate (BTU/HR): 150,000
  • Low Fire Rate (BTU/HR): 115,000
  • Heat Exchanger Length: 60 ft
  • Electric Supply: 120 V AC, 60 HZ, 1 Amp: 36” cord, grounded 3 prong plug
$4,455.00
$3,564.00

  • Motor: 5HP 240V Three Phase
  • Speed: 60 FPM
  • Passline Height: 34”
  • Gauge Capacity w/additional tooling: 16-28

  • Motor: 10HP 460V Three Phase
  • Line Speed: 60 FPM
  • Gauge Capacity: 18-26 Ga
  • Passline Height: 36”
$98,500.00
$94,696.95

  • Two (2) 5” x 16” flexible chutes
  • Air housing with 5” duct collars and clamps
  • Necessary hardware to install the KDC to the unit
$250.00
$229.00

  • Two (2) 6” x 18” flexible chutes
  • Air housing with 6” duct collars and clamps
  • Necessary hardware to instill the KDC to the unit
$295.00
$259.00

  • Two (2) 8” x 21” flexible chutes
  • Air housing with 8” duct collars and clamps
  • Necessary hardware to install the KDC to the unit
$375.00
$319.00

  • Two (2) 10” x 24” flexible chutes
  • Air housing with 10” duct collars and clamps
  • Necessary hardware to install the KDC to the unit
$395.00
$329.00

  • Two (2) 12” x 36” flexible chutes
  • Air housing with 12” duct collars and clamps
  • Necessary hardware to install the KDC to the unit
$595.00
$459.00

  • 60,000 btu/h cooling capacity
  • Runs on 460V 20-amp 3PH circuit
  • Variable frequency drive airflow control
  • Removable wheels and forklift skid access for easy movement
$20,595.00
$15,446.25

  • Effective Volume: 8,369 cu.ft
  • Typical Extraction: 57 ppd
  • Airflow: 282 CFM
  • Power Supply: 470W, 60 Hz, 110V Single Phase

  • Motor: 440V Three Phase
  • Max Width: 72”
  • TDFC Width: 44”-56”-68”
  • Slip and Drive Width: 48”-60”-72”

  • Effective Volume: 8,369 cu.ft
  • Typical Extraction: 52 ppd
  • Airflow: 282 CFM
  • Power Supply: 470W, 60 Hz, 110V Single Phase

  • Effective Volume: 8,369 cu.ft
  • Typical Extraction: 56 ppd
  • Airflow: 360 CFM
  • Power Supply: 880W, 60 Hz, 110V Single Phase

  • High Fire Rate (BTU/HR): 205,000
  • Low Fire Rate (BTU/HR): 160,000
  • Heat Exchanger Length: 70 ft
  • Electric Supply: 120 V AC, 60 HZ, 1 Amp: 36” cord, grounded 3 prong plug
$5,008.00
$4,006.00

  • Gauge Range: 18-26 Ga
  • Motor: 7.5HP 440V Three Phase
  • Line Speed: 75 FPM
  • Passline Height: 34”

  • Motor: 5HP 440V Three Phase
  • Line Speed: 50 FPM
  • Gauge Capacity: 20-26 Ga
  • 24” Full Hardened Tool Steel Guides

  • KW: 10
  • BTU: 34130
  • Amp: 42 A
  • Temperature Range: 40°-100° F
$2,507.00
$1,604.48

  • Gauge Range: 18-26 Ga
  • Motor: 7.5HP 220V Three Phase
  • Line Speed: 75 FPM
  • Passline Height: 34”