Searching thousands of products...

  • 20" Abrasive Wheel 
  • Rugged Cast iron Trunnion & Arm 
  • 1" Wheel Arbor 
  • Sealed Ball Bearings 
  • Totally Enlcosed Cabinet, Side Access Ports For Long Stock
  • 15HP Motor 
  • V-Belt Drive, Sealed Ball Bearings 
  • Air Chain Vise 
  • 20" Abrasive Wheel 
  • Rugged Cast iron Trunnion & Arm 
  • 1" Wheel Arbor 
  • Sealed Ball Bearings 
  • Totally Enlcosed Cabinet, Side Access Ports For Long Stock
  • 15HP Motor 
  • V-Belt Drive, Sealed Ball Bearings 
  • Air Chain Vise 
  • Extra-heavy Cast iron base, trunnion and arm.
  • 5HP, TEFC. 1 PH (220 Volt only) 
  • Spindle RPM - 4400.
  • Dimensions - L 22" x W 14" x H 24".
  • 5 HP, TEFC. 3 PH motor (220 or 440V)
  • Spindle RPM - 4400.
  • Dimensions - L 22" x W 14" x H 24".
  • Stock stand included.
  • Main motor: 10HP, 220V/440V
  • Sliding table size: 14" x 126"
  • Maximum rip capacity: 51-1/4"
  • Maximum sheet capacity: 124" x 134"
  • Motor: 5 HP, 230V, single-phase
  • Sliding table size: 12-1/4" x 63"
  • Maximum rip capacity: 33"
  • Main table dimensions: 14-3/8" x 27"
  • Drive Motor 2 Speed: 5 hp/3 hp
  • Blade Size Diameter Min/Max: 10” - 17”
  • Blade Bore: 1.25”
  • Max. Vise Clamping Capacity: 5.9”
  • Mounted on a DCV-6 dust collector/vacuum
  • Manual switch on saw and dust collector
  • Uses 12″ or 14″ abrasive wheels. 1″ wheel arbor
  • 4400 Spindle RPM
$4,995.00
$4,837.00
  • Mounted on a DCV-6 dust collector/vacuum
  • Manual switch on saw and dust collector
  • Uses 12″ or 14″ abrasive wheels. 1″ wheel arbor
  • 4400 Spindle RPM
$4,695.00
$4,585.00
  • Motor: 7-1/2 HP, 220V/440V
  • Max capacity of crosscut fence: 68-1/2"
  • Maximum sheet capacity: 63" x 101-1/2"
  • Main Table Dimensions: 35-1/4" x 21-1/2"
  • Comes with stand and chain vise
  • 3450 RPM, 4400 spindle RPM.
  • 5HP TEFC motor,1phase 220v 
  • Made in the USA
  • Comes with stand and chain vise
  • 3450 RPM, 4400 spindle RPM.
  • 5HP TEFC motor 3 phase 220/440 volt
  • Made in the USA
  • Magnetic Starter with 110v Control Circuit and Overload Protection
  • Fixed Table Models 26-3/4" (680mm) x 29" (736mm) Heavy-duty Cast Iron Table with two-way tilt (15°L & 45°R)
  • Blade Speed Indicator
  • Two (2) year limited warranty
  • Magnetic Starter with 110v Control Circuit and Overload Protection
  • Hydraulic Table Models 26-3/4" (680mm) x 29" (736mm) Heavy-duty Cast Iron Table with two-way tilt (15°L & 45°R) Four (4) T-Slots on Top Table Travel 13"
  • Blade Tension Indicator
  • Two (2) year limited warranty
  • Magnetic Starter with 110v Control Circuit and Overload Protection
  • Fixed Table Models 26-3/4" (680mm) x 29" (736mm) Heavy-duty Cast Iron Table with two-way tilt (15°L & 45°R)
  • 3/4" (19mm) Carbon Hardback Blade
  • Two (2) year limited warranty
  • Magnetic Starter with 110v Control Circuit and Overload Protection
  • 1/2" (13mm) and 3/4" (19mm) Chevron type Blade Guides with Back-Up Roller
  • Hydraulic Table Models 26-3/4" (680mm) x 29" (736mm) Heavy-duty Cast Iron Table with two-way tilt (15°L & 45°R) Four (4) T-Slots on Top Table Travel 13"
  • Two (2) year limited warranty
  • 5 Hp TEFC Motor, with Brake (full stop from max. speed within 10 seconds)
  • 1" (25.4mm) Chevron type Blade Guides with Back-Up Roller
  • Blade Speed Indicator
  • Two (2) Year Limited Warranty
  • 5 Hp TEFC Motor, with Brake (full stop from max. speed within 10 seconds)
  • Auxiliary Table 19" (483mm)W x 26-3/4" (679mm)L
  • Blade Tension Indicator
  • Two (2) Year Limited Warranty
  • 10" High speed nonferrous saw for cutting aluminum, brass and plastic
  • 3.25" round solid capacity
  • Uses high speed carbide tipped blade (non included)
  • Single quick release cam-lock vise
$1,975.00
$1,899.00
  • Spindle Arbor Size: 1”
  • Spindle RPM: 2500
  • Capacities: 4″ solid, 6″ shapes@ 90 degrees, 3″ solid, 5″ shapes@ 45 degrees Left OR Right
  • 20HP unit amp draws: 220V 46 amps and 440V 23 amps
  • Spindle Arbor Size: 1”
  • Spindle RPM: 2500
  • Capacities: 4″ solid, 6″ shapes@ 90 degrees, 3″ solid, 5″ shapes@ 45 degrees Left OR Right
  • 20HP unit amp draws: 220V 46 amps and 440V 23 amps
  • Wheel: 20” or 22” (Not included)
  • Spindle: 1”
  • RPM: 2500
  • Capacities: 4″ solids, 6″ most shapes. At 45 deg: 3″ solids, 5″ most shapes.