Tin Knocker

  • Capacity: 16 Ga.
  • Bend Length: 8'1"
  • Beam Lift: 2-1/4" 
  • Depth of Box or Pan: 2" 3sides
  • Capacity: 18 Ga.
  • Bend Length: 10'1"
  • Beam Lift: 2-1/4"
  • Box or Pan Depth: 2" 3sides
  • Capacity: 16 Ga. 
  • Bend Length: 10'1"
  • Beam Lift: 2-1/4"
  • Depth of Box or Pan: 2" 3sides
  • Capacity: 20 Ga Mild Steel 
  • Bend Length: 30" 
  • Cleat Depth: 0.500"
  • Stand Not Included 
  • Max Shearing Capacity (Mild Steel): 16 Ga. 
  • Max Shearing Capacity (Stainless Steel): 20 Ga. 
  • Maximum Cutting Length: 52"
  • Standard Motor: 3 HP 220V Single Phase 
  • Max bend length: 53”
  • Max Capacity: 20-gauge mild steel
  • Max opening: 2”
  • Max folding angle: 95 degrees
  • Maximum Bend Length: 53”
  • Maximum Material Capacity: 20-Gauge Mild Steel
  • Maximum Opening: 1.5”
  • Maximum Folding Angle: 95 Degrees
  • Capacity: 16 Ga.
  • Bend Length: 48" 
  • Max Beam Length: 1.25" 
  • Stand Not Included 
  • Capacity: 22 Ga.
  • Bend Length: 48" 
  • Max Beam Lift: 7/8"
  • Stand Not Included
  • Load Capacity: 2,000 lb (full sheet of 1” plate)
  • Cutting Speed: 300ipm
  • Repeatability (approx.): ± 0.0005”
  • Power Supply: 230V Single Phase
  • Load Capacity: 2,000 lb (full sheet of 1” plate)
  • Cutting Speed: 300ipm
  • Repeatability (approx.): ± 0.0005”
  • Power Supply: 400V Three Phase
  • Capacity: 22Ga Mild Steel 
  • Bend Length: 6' 
  • Beam Lift: 1-1/4"
  • Depth of Box or Pan: 2" 3sides 
  • Capacity: 22 Ga Mild Steel
  • Bend Length: 48.25”
  • Beam Lift: 1”
  • Weight: 350 lbs.
  • Capacity with lower tooling flanges: 72" x 16Ga
  • Capacity without lower tooling flanges: 72" x 20Ga
  • Lift of beam: 1.5"
  • Min reverse bend: 5/8"
  • Actual max bend length: 53”
  • Max Capacity: 20-gauge mild steel
  • Max opening: 1.5”
  • Max folding angle: 135 degrees
  • Maximum Bend Length: 79”
  • Maximum Material Capacity: 20-Gauge Mild Steel
  • Maximum Opening: 1.5”
  • Maximum Folding Angle: 135 Degrees
  • Maximum Bend Length: 50”
  • Maximum Material Capacity: 16-Gauge Mild Steel
  • Maximum Opening: 1.78”
  • Maximum Folding Angle: 135 Degrees
  • Maximum Bend Length: 79"
  • Maximum Material Capacity: 16g
  • Maximum Opening: 1.78"
  • Maximum Folding Angle: 135 degrees
  • Maximum Bend Length: 50”
  • Maximum Material Capacity: 16-Gauge Mild Steel
  • Maximum Opening: 1.78”
  • Maximum Folding Angle: 100 or 150 Degrees (depending on profile)

Founded in 1998 and since then has been supplying companies with both new and used sheet metal machinery. Since opening they have become a trusted supplier in the sheet metal industry. They sell machines such as cleat benders, button locks, and slitters. 

If you are interested in cleat benders or anything else Tin Knocker has to offer, please contact us. Here at Elite Metal Tools we offer low prices and the best customer service,