Tin Knocker

  • Capacity: T-D-P 18-24 ga
  • Forming Sections: 14
  • Shaft Diameter: 1.25″
  • Forming Speed: 50fpm
  • Water Cooled
  • Foot Operated
  • Universal reversible double end ars, 90 & 22 degrees
  • 1" quick release tip holders w/ No. 2 Tape Sockets
  • Dimensions: 40″L x 24″W x 44″H
  • Motor: 1 HP, 115/230 Volt, 1800 RPM
  • Capacity: 20-26 Gauge Mild Steel
  • Depth of Pocket: 5/16″ (7.9mm)
  • 20 Ga. Capacity
  • 24" throat slitter
  • 90 FPM 
  • Quick adjusting back gauge and scale
  • Drive Cleats 20-26 Ga.
  • Standing Seam 22-26 Ga
  • Male & Female Button Lock 20-24 Ga.
  • Slits & Feeds S & Drive Rolls
  • Roll width 60” Max
  • Roll Diameter 40” Max
  • 270 lbs.
  • 79″ x 28″ x 24″
  • 16 Ga. Mild Steel x 60"
  • 1HP, 115V 1PH
  • Beads are adjustable in depth to 3/16" deep
  • Includes 5 sets of bead tooling
  • Max Cutting Width: 48 ½”
  • Table Height: 35”
  • Overall depth: 26”
  • Shaft Diameter: 3”
  • 24 Gauge Mild Steel Capacity
  • 1/2 HP, 1700 RPM Motor, 115V, 1Phase 
  • 3/16" Flange Height
  • Approx. 35 FPM Speed
  • Weight: 35 lbs
  • Dimensions: 26 x 16 x 12 in
  • Capacity: 20 Ga x 7/32″
  • Minimum Radius: 1 3/4″
  • Weight: 35 lbs
  • Dimensions: 26 x 16 x 12 in
  • Capacity: 24 Ga Mild Steel
  • UPS: UPS Capable
  • Capacity: 22-28 Ga
  • Motor: 5 H.P. motor 230/3/60
  • Speed: 90 FPM
  • Dimensions: 69 x 29 x 49 in
  • 16 Ga Capacity
  • 8" Bend Length Capacity
  • 21/4" Beam Lift
  • 2" 3 sides Depth of Box or Pan
  • 8 Tons
  • 18" Throat Depth
  • 18 Tooled Stations
  • Punch Range: 1/8" up to 21/4"
  • Maximum shearing capacity, mild steel: 16 ga. / 1,6 mm
  • Maximum cutting length: 52 in. / 1320 mm
  • Back gauge range: 30 in. / 762 mm
  • Floor space, gauges in position: 66 x 76 x 42 in/ 1676 x 1930 x 1070 mm
  • 22 Gauge Mild Steel Capacity
  • 30" Material Width
  • 1HP Motor
  • 110 Volt
  • Speed: 90 feet per minute
  • Motor: 5 HP 1800 RPM
  • Drive: Matched Double Vee Belt
  • Feed table height: 34 5/8”
  • Capacity: 26-gauge galvanized/stainless steel & 22-gauge aluminum
  • Maximum Sheet Width: 48″
  • Table top height or working surface height: 34″
  • Point of operation safety guard
  • Capacity: 16 Ga. Mild Steel
  • Blade Length: 5"
  • Angle: 90 Degrees
  • Weight: 170 lbs
  • 16 Ga. Mild Steel Capacity
  • 52" Shearing Length
  • 25" w/ Engraved Rule
  • 25" Scaled Back Gauge
  • Dimensions: 41 x 25 x 30 in
  • Speed: Approx. 35 FPM
  • Weight: 305 lbs
  • lange Height: 3/16″
  • 30" Bar Folder
  • One motion clamp and fold to desired angle
  • 22 Ga. Max Capacity
  • 30" Max Material Length
  • 22 Ga. Capacity
  • 48" Bend Length
  • 3" Box Depth
  • Allows .25" reverse bends in lighter materials
  • Tin Knocker
  • 20 Gauge and Lighter Capacity
  • 25" x 25" x 41"
  • 207 Lbs.