Powermatic

  • Layout
Powermatic 2000B table saw - 5HP 1PH 230V 50" RIP w/Accu-Fence & Router Lift PM25150RK at Elite Metal Tools
Powermatic 2000B table saw - 5HP 1PH 230V 50" RIP w/Accu-Fence & Router Lift PM25150RK
  • Adjustable angle indicators on the blade bevel scale for repeatable bevel cuts
  • Arbor lock for quick and easy blade changes
  • Integrated digital read out for precise bevel cuts
  • Integrated dust collection
  • Integrated hydraulic castor system for ease of movement around the shop
$7,064.27
$5,749.99
As low as $186/mo
View Details
Powermatic 2000B table saw - 5HP 3PH 230/460V 50" RIP w/Accu-Fence PM25350K at Elite Metal Tools
Powermatic 2000B table saw - 5HP 3PH 230/460V 50" RIP w/Accu-Fence PM25350K
  • Adjustable angle indicators on the blade bevel scale for repeatable bevel cuts
  • Arbor lock for quick and easy blade changes
  • Integrated digital read out for precise bevel cuts
  • Integrated dust collection
  • Integrated hydraulic castor system for ease of movement around the shop
$6,327.13
$5,149.99
As low as $167/mo
View Details
Powermatic 14" Bandsaw with Stand and Riser Block | PWBS-14CS 1791216K at Elite Metal Tools
Powermatic 14" Bandsaw with Stand and Riser Block | PWBS-14CS 1791216K
  • 60 watt adjustable lamp built into the body provides direct light on blade and work piece while cutting (bulb not included)
  • Carter™ quick tension lever speeds blade changes and the detension setting extends blade life during non-use
  • Chip blower ensures a clean, visible cut line
  • Durable micro-adjustable dual bearing blade guide system above and below the table for close blade control with less friction
  • Easy to read tensioning gauge settings indicated in "blade width" increments
$2,088.56
$1,699.99
As low as $55/mo
View Details
Powermatic PM2244 Drum Sander, 1-3/4HP, 115V 1792244 at Elite Metal Tools
Powermatic PM2244 Drum Sander, 1-3/4HP, 115V 1792244
  • Belt tracking is designed to reduce the need for manual adjustment
  • Closed stand with storage for keeping abrasives organized
  • Drum carriage is designed to provide strength and consistent performance over time
  • Emergency stop for quick shutoff
  • Included infeed/outfeed tables provide 37-1/2 inches of support for the workpiece
$4,054.27
$3,299.99
As low as $107/mo
View Details
Powermatic 54A Jointer, 1HP 1PH 115/230V 1791279DXK at Elite Metal Tools
Powermatic 54A Jointer, 1HP 1PH 115/230V 1791279DXK
  • 66" long adjustable infeed and outfeed tables provide more working surface
  • Built-in ledge for 1/2" rabbeting capacity
  • Enlarged sheet metal stand provides a sturdy base
  • Extra-long 38" two-way tilting fence with positive stops provides quick positioning for 90° or bevel cuts
  • Fence controls are center mounted for convenience
$2,334.27
$1,899.99
As low as $61/mo
View Details
Powermatic 15HH Planer, 3HP 1PH 230V 1791213 at Elite Metal Tools
Powermatic 15HH Planer, 3HP 1PH 230V 1791213
  • Angled dust chute with 4" port positions collection hose away from the work area while providing efficient chip and dust collection
  • Large cast iron handwheel positions table quickly and easily
  • Large, precision ground cast iron table and extensions provide maximum workpiece support
  • Lockable built-in caster system allows for mobility in the shop
  • Steel top-mounted return rollers speed repetitive cuts
$5,282.84
$4,299.99
As low as $139/mo
View Details
Powermatic 2000B table saw - 3HP 1PH 230V 50" RIP w/Accu-Fence PM23150K at Elite Metal Tools
Powermatic 2000B table saw - 3HP 1PH 230V 50" RIP w/Accu-Fence PM23150K
  • Adjustable angle indicators on the blade bevel scale for repeatable bevel cuts
  • Arbor lock for quick and easy blade changes
  • Integrated digital read out for precise bevel cuts
  • Integrated dust collection
  • Integrated hydraulic castor system for ease of movement around the shop
$5,774.27
$4,699.99
As low as $152/mo
View Details
Powermatic 511 Panel Saw, 3HP 1PH 115V 1510007 at Elite Metal Tools
Powermatic 511 Panel Saw, 3HP 1PH 115V 1510007
  • 3HP worm drive saw motor rotates in carriage to perform rip cuts
  • Casters for easy mobility
  • Dual 4" dust ports
  • Dual 4" dust ports with nylon brush surrounding blade for front and rear dust exhaust
  • Heavy-duty welded one-piece steel frame prevents vibration and ensures solid support
$10,565.70
$8,599.99
As low as $279/mo
View Details
Powermatic PJ882 Jointer, 2HP 1PH 230V 1610079 at Elite Metal Tools
Powermatic PJ882 Jointer, 2HP 1PH 230V 1610079
  • High-mount switch for operator convenience
  • Large 8" x 82" precision ground cast iron table surface for heavy-duty work
  • Parallelogram design allows for easy and accurate adjustment of tables
  • Parallelogram design for close table-to-cutterhead proximity and fast depth of cut adjustments
  • Patented handwheel with worm gear system for precise fence tilting
$4,791.42
$3,899.99
As low as $126/mo
View Details
Powermatic PM2820EVS Drill Press, 1HP 1PH 120V 1792820 at Elite Metal Tools
Powermatic PM2820EVS Drill Press, 1HP 1PH 120V 1792820
  • Designed for a range of materials and applications
  • For unbeatable accuracy, the laser cross hairs provide precise tool point indication.
  • Gear driven power transfers torque consistently and efficiently for a wide range of materials.
  • Handles can be reversed for left or right sided operation.
  • Highly visible digital readout gives users control.
$3,194.27
$2,599.99
As low as $84/mo
View Details
Powermatic DT45 Dovetailer, 1HP 1PH 115/230V 1791304 at Elite Metal Tools
Powermatic DT45 Dovetailer, 1HP 1PH 115/230V 1791304
  • Cast iron and steel construction for added stability and durability
  • Cutter height of 3/16" to 3/4" accommodates different cutting depths and board thicknesses
  • Eccentric spindle collet for resharpened cutters
  • Extra large soft grip handle provides positive control and comfort
  • Four dovetail center lines at 1", 1-1/2", 2", and 2-1/2" create a custom appearance
$7,248.56
$5,899.99
As low as $191/mo
View Details
Powermatic Powermatic 2014 Lathe 1792014 at Elite Metal Tools
Powermatic Powermatic 2014 Lathe 1792014
  • Acme threads on tail stock for smoother operation and longevity
  • Attached tool caddie allows convenient access to centers, wrenches, and accessories
  • Banjo features a non-marring, pinch style clamp for solid tool rest placement
  • Chrome-trimmed hand wheels are ergonomic for a comfortable feel
  • Includes 8 inch tool rest with 1 inch post
$2,948.56
$2,399.99
As low as $77/mo
View Details
Powermatic 60HH 8" Jointer, 2HP 1PH 230V, Helical Head 1610086K at Elite Metal Tools
Powermatic 60HH 8" Jointer, 2HP 1PH 230V, Helical Head 1610086K
  • Adjustment lever offers quick infeed table positioning and fine-tuning of cut depth
  • Extra long tables are mounted on dovetailed ways for extended workpiece support
  • Handwheel operated worm gear system for smooth fence tilting
  • High mount switch for operator convenience
  • Magnetic push blocks can be stored on the machine within constant reach
$4,299.99
$3,499.99
As low as $113/mo
View Details
Powermatic 2020B Lathe, 2HP, 1 or 3PH, 220V 1792020 at Elite Metal Tools
Powermatic 2020B Lathe, 2HP, 1 or 3PH, 220V 1792020
  • Brass-tipped knockout bar concentrates the action in the sliding handle; the brass tip will not damage drive centers
  • Digital RPM readout for accurate speed adjustments
  • Redesigned tool rest geometry allows for better chisel movement along the tool rest
  • Set of dead centers which hold a spindle for visual comparison
  • Sliding headstock with electronic variable speed
$6,265.70
$5,099.99
As low as $165/mo
View Details
Powermatic 31A Belt/Disc Sander, 2HP 3PH 230/460V 1791292K at Elite Metal Tools
Powermatic 31A Belt/Disc Sander, 2HP 3PH 230/460V 1791292K
  • 12" Disc is balanced for flat, even coverage
  • 460V operation requires an additional 460V magnetic switch (part 31A-MSA-2)
  • 6" x 48" sanding belt can be changed and adjusted quickly and easily
  • Belt and disc tables are precision ground cast iron with miter slots for precision and rigidity
  • Belt table tilts down to 45°, and can be set for beveled and mitered angle sanding
$2,702.84
$2,199.99
As low as $71/mo
View Details
Powermatic WB-37, 37" Sander, 20HP 3PH 230/460V with DRO 1790837 at Elite Metal Tools
Powermatic WB-37, 37" Sander, 20HP 3PH 230/460V with DRO 1790837
  • Centralized controls allow you to access all the needed buttons on one simple panel
  • Digital readout will show the user the exact thickness of the finished piece, or will allow you to preset exactly the thickness you prefer for the finished piece
  • Includes 2 Sanding belts, 100 and 180 Grit
  • The auto thicknesser will capture the piece of wood to give the user the exact starting thickness
  • Disc brake slows the machine quickly and will activate immediately to stop machine in an emergency
$27,028.56
$21,999.99
As low as $435/mo
View Details
Powermatic TS29 Shaper, 7.5HP 3PH 230 1791284 at Elite Metal Tools
Powermatic TS29 Shaper, 7.5HP 3PH 230 1791284
  • Five spindle speeds in forward and reverse with lighted indicator
  • Full coverage guard with workpiece hold downs
  • Fully adjustable fence has dual digital readout positioning with micrometer adjustments
  • Includes 3/4", 1" and 1-1/4" spindles
  • Large diameter multiple table inserts accommodate virtually any size cutter
$16,217.13
$13,199.99
As low as $428/mo
View Details
Powermatic Powermatic Micro Dust Air Filtration System | PM1250 1791331 at Elite Metal Tools
Powermatic Powermatic Micro Dust Air Filtration System | PM1250 1791331
  • Cycles air 5X per hour and proven to reduce airborne particles in a 680 sq. ft. area similar to an oversized 2 car garage
  • Easy portability with a convenient carrying handle and includes multiple mounting positions for maximum versatility in the shop
  • Electrostatic filter has a 3000-hour life and easy cleaning accessibility
  • Energy star rated and certified to California Air Resource Board (CARB) and Ozone emission standards
  • Filter cleans easily with vacuum
$921.42
$814.00
As low as $26/mo
View Details
Powermatic DT65 Dovetailer, 1HP 1PH 230V 1791305 at Elite Metal Tools
Powermatic DT65 Dovetailer, 1HP 1PH 230V 1791305
  • Cast iron and steel construction for added stability and durability
  • Cutter height of 3/16" to 3/4" accommodates different cutting depths and board thicknesses
  • Eccentric spindle collet for resharpened cutters
  • Extra large soft grip handle provides positive control and comfort
  • Four dovetail center lines at 1", 1-1/2", 2", and 2-1/2" create a custom appearance
$9,828.56
$7,999.99
As low as $259/mo
View Details
Powermatic 64B, 1.75 HP 115/230V, 30" Fence with Riving Knife 1791229K at Elite Metal Tools
Powermatic 64B, 1.75 HP 115/230V, 30" Fence with Riving Knife 1791229K
  • Accu-Fence® locks to rail without play for increased safety and precision
  • Blade guard and riving knife have quick release for tool-less mounting and removal
  • Built-in dust port increases dust collection efficiency
  • Cast iron trunnion ensures smooth blade positioning
  • Chrome-trimmed handwheels are ergonomically designed
$2,702.84
$2,199.99
As low as $71/mo
View Details
Powermatic 2000B table saw - 3HP 1PH 230V 30" RIP w/Accu-Fence PM23130K at Elite Metal Tools
Powermatic 2000B table saw - 3HP 1PH 230V 30" RIP w/Accu-Fence PM23130K
  • Adjustable angle indicators on the blade bevel scale for repeatable bevel cuts
  • Arbor lock for quick and easy blade changes
  • Integrated digital read out for precise bevel cuts
  • Integrated dust collection
  • Integrated hydraulic castor system for ease of movement around the shop
$5,405.70
$4,399.99
As low as $142/mo
View Details
Powermatic 1632 Open End Belt Sander, 5HP 1PH 230V 1791250 at Elite Metal Tools
Powermatic 1632 Open End Belt Sander, 5HP 1PH 230V 1791250
  • Air pressured oscillating movement for smoother surfaces
  • Choose from 15 or 32.5 FPM dual feed speed
  • Conveniently mounted load meter maintains constant check during operation
  • Extendable workpiece support arm
  • Front facing emergency safety stop
$10,934.27
$8,899.99
As low as $289/mo
View Details
Powermatic PM2200 Cyclonic Dust Collector - with HEPA Filter Kit 1792200HK at Elite Metal Tools
Powermatic PM2200 Cyclonic Dust Collector - with HEPA Filter Kit 1792200HK
  • HEPA Filter collects 99.97% of all particles passing through as small as 0.3 Micron
  • Integrated vacuum lines in the drum retain the bag without the need for a separate bag frame
  • Multiple hose mounting options: three 4" dust ports or one 8" dust port
  • One-handed drum release allows for simple removal of the drum for bag changes
  • Powerful 3 HP motor moves 1,543 Cubic Feet of air per Minute
$4,791.42
$3,899.99
As low as $126/mo
View Details
Powermatic Powermatic 2014 Lathe and Stand 1792014AK at Elite Metal Tools
Powermatic Powermatic 2014 Lathe and Stand 1792014AK
  • Acme threads on tail stock for smoother operation and longevity
  • Attached tool caddie allows convenient access to centers, wrenches, and accessories
  • Banjo features a non-marring, pinch style clamp for solid tool rest placement
  • Chrome-trimmed hand wheels are ergonomic for a comfortable feel
  • Includes 8 inch tool rest with 1 inch post
$3,439.99
$2,799.99
As low as $90/mo
View Details

Founded in 1921 and since then has become one of the most trusted brands in the milling industry. They have worked hard since opening on improving their machines as well as making them more durable and higher quality. They sell products such as dust collectors, fence assembly, routers, panel saws, filtration machines, and so much more. 

If you are interested in dust collectors or anything else Powermatic has to offer, please contact us. Elite Metal Tools offers low prices on top quality machinery and one of a kind customer service.