JET

  • Layout
Jet JET — CA Aloris Set for 22 in ZX Lathes 650285 at Elite Metal Tools
Jet JET — CA Aloris Set for 22 in ZX Lathes 650285
  • Advanced design provides built-in quick tool changing, versatility with positive rigidity to meet the most exacting working tolerances.
  • Includes super precision tool post, #1 and #2 tool holders
$1,600.00
$1,345.00
As low as $43/mo
View Details
Jet JCT-3645, 4" Stroke, Hex Shank, Open Handle Chipping Hammer 550645 at Elite Metal Tools
Jet JCT-3645, 4" Stroke, Hex Shank, Open Handle Chipping Hammer 550645
  • Comes with standard type retainer
  • Heat treated cylinder and piston for added durability
  • Heavy-Duty, industry proven valve design
  • Open style forged handle is engineered to dissipate the impact energy more efficiently, reducing user fatigue and increasing safety
  • Backed by the industry leading 2-Year Warranty
$951.00
$647.99
As low as $21/mo
View Details
Jet GH-1640ZX With ACU-RITE 303 DRO With Collet Closer 321383 at Elite Metal Tools
Jet GH-1640ZX With ACU-RITE 303 DRO With Collet Closer 321383
  • Articulating LED work lamp
  • Centrally located controls with jog button
  • Electronic Chuck Key Holder
  • Five position automatic carriage stop increases productivity
  • Full length splash guard and coolant return
$45,531.43
$37,299.00
As low as $738/mo
View Details
Jet JTM-1050VS2 Mill With 3-Axis Newall DP700 DRO (Quill) With X, Y and Z-Axis Powerfeeds And Power Draw Bar 690234 at Elite Metal Tools
Jet JTM-1050VS2 Mill With 3-Axis Newall DP700 DRO (Quill) With X, Y and Z-Axis Powerfeeds And Power Draw Bar 690234
  • Adjustable gibs throughout
  • Chrome lead screws on X and Y axis
  • Chrome-plated motor shaft with bearing support at end
  • Hardened and ground square vertical knee ways and cross ways
  • Heavy duty motor drive
$29,057.63
$23,399.00
As low as $463/mo
View Details
Jet JTM-1254VS with NEWALL DP700 3X (Q) DRO, X Powerfeed & Air Power Drawbar 698079 at Elite Metal Tools
Jet JTM-1254VS with NEWALL DP700 3X (Q) DRO, X Powerfeed & Air Power Drawbar 698079
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
$33,096.29
$26,939.00
As low as $533/mo
View Details
Jet 3-Ton Aluminum Hand Chain Hoist with 10ft of Lift | AL100-300-10 133310 at Elite Metal Tools
Jet 3-Ton Aluminum Hand Chain Hoist with 10ft of Lift | AL100-300-10 133310
  • Extra large hand chain opening for side chain pulling
  • Sealed housing to provide extra protection against the elements
  • Complies with ANSI/ASME B30.16 and HAST-2 Standards
  • Cast steel safety latches
  • Dual pawl Weston style brake
$1,258.00
$803.00
As low as $26/mo
View Details
Jet JET — CA Aloris Set for 18 in ZX Lathes 650280 at Elite Metal Tools
Jet JET — CA Aloris Set for 18 in ZX Lathes 650280
  • Advanced design provides built-in quick tool changing, versatility with positive rigidity to meet the most exacting working tolerances.
  • Includes super precision tool post, #1 and #2 tool holders
$1,600.00
$1,361.00
As low as $44/mo
View Details
Jet JLH-900WO-10 9 Ton Lever Hoist, 10' Lift with Overload Protection 376701 at Elite Metal Tools
Jet JLH-900WO-10 9 Ton Lever Hoist, 10' Lift with Overload Protection 376701
  • All steel construction
  • Caged needle bearings support the load sheave to increase efficiency and promote smooth operation
  • Enhanced ergonomic grip allows for greater operator control and increased comfort
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
$3,578.00
$2,350.99
As low as $76/mo
View Details
Jet GH-1880ZX With ACU-RITE 303 DRO 321595 at Elite Metal Tools
Jet GH-1880ZX With ACU-RITE 303 DRO 321595
  • Articulating LED work lamp
  • Centrally located controls with jog button
  • Electronic Chuck Key Holder
  • Five position automatic carriage stop increases productivity
  • Full length splash guard and coolant return
$46,440.00
$38,199.00
As low as $755/mo
View Details
Jet EVS-949 Mill with 2-Axis Newall DP700 DRO and X, Y, Z-Axis JET Powerfeeds 894356 at Elite Metal Tools
Jet EVS-949 Mill with 2-Axis Newall DP700 DRO and X, Y, Z-Axis JET Powerfeeds 894356
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
$37,936.86
$30,879.00
As low as $611/mo
View Details
Jet TS500-230-010,5-Ton Two Speed Electric Chain Hoist 3-Phase 10' Lift, MT500 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 6ft 140127K at Elite Metal Tools
Jet TS500-230-010,5-Ton Two Speed Electric Chain Hoist 3-Phase 10' Lift, MT500 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 6ft 140127K
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
  • 5 Pocket Chain Sprocket provides reduced vibration, smoother operation, and reduced chain wear during long lifting or lowering of loads
$18,118.00
$11,364.00
As low as $369/mo
View Details
Jet JTM-1254RVS with NEWALL DP700 DRO X & Y Powerfeeds & Air Power Drawbar 698129 at Elite Metal Tools
Jet JTM-1254RVS with NEWALL DP700 DRO X & Y Powerfeeds & Air Power Drawbar 698129
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
$32,899.71
$26,779.00
As low as $529/mo
View Details
Jet 1/8-Ton Electric Chain Hoist 1-Phase 15' Lift | JSH-275-15 110115 at Elite Metal Tools
Jet 1/8-Ton Electric Chain Hoist 1-Phase 15' Lift | JSH-275-15 110115
  • Aluminum Housing- Aluminum alloy housing decreases the weight for convenient transportation
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
  • Heat Treated Gears- Heat treated alloy steel geared drive train for long lasting durability
  • JET VOLT and SSC Series Electric Hoists and JET ET Series Electric Trolleys are not rated or designed for outdoor use or wet environments
  • Limit Switches- Upper and lower limiting switches increase safety by preventing the load chain from over traveling
$3,061.00
$1,956.99
As low as $63/mo
View Details
Jet JLP-150A-10SH, 1-1/2 Ton Lever Hoist, 10' Lift & Shipyard Hooks 287701 at Elite Metal Tools
Jet JLP-150A-10SH, 1-1/2 Ton Lever Hoist, 10' Lift & Shipyard Hooks 287701
  • All steel construction
  • Impact resistant all steel construction for added durability and protection
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
  • JET’s improved easy free chain design is a two-step, no load, free chaining system. The system permits quicker hoist positioning and take up of slack chain, and is engineered not to free chain under load
  • NEW! Redesigned ergonomic grip allows for greater operator control and increased comfort
$581.00
$415.00
View Details
Jet JLH-600WO-10 6 Ton Lever Hoist, 10' Lift with Overload Protection 376601 at Elite Metal Tools
Jet JLH-600WO-10 6 Ton Lever Hoist, 10' Lift with Overload Protection 376601
  • All steel construction
  • Caged needle bearings support the load sheave to increase efficiency and promote smooth operation
  • Enhanced ergonomic grip allows for greater operator control and increased comfort
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
$2,100.00
$1,377.99
As low as $44/mo
View Details
Jet JLH-600WO-20 6 Ton Lever Hoist, 20' Lift with Overload Protection 376603 at Elite Metal Tools
Jet JLH-600WO-20 6 Ton Lever Hoist, 20' Lift with Overload Protection 376603
  • All steel construction
  • Caged needle bearings support the load sheave to increase efficiency and promote smooth operation
  • Enhanced ergonomic grip allows for greater operator control and increased comfort
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
$2,354.00
$1,545.30
As low as $50/mo
View Details
Jet 1-1/2-Ton Hand Chain Hoist with 10' Lift & Overload Protection | L-100-150WO-10 101100 at Elite Metal Tools
Jet 1-1/2-Ton Hand Chain Hoist with 10' Lift & Overload Protection | L-100-150WO-10 101100
  • Double sealed ball bearings support the load sheave to increase efficiency and promote smooth operation
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
$703.00
$472.00
View Details
Jet 3-Ton Aluminum Hand Chain Hoist with 15ft of Lift | AL100-300-15 133315 at Elite Metal Tools
Jet 3-Ton Aluminum Hand Chain Hoist with 15ft of Lift | AL100-300-15 133315
  • Extra large hand chain opening for side chain pulling
  • Sealed housing to provide extra protection against the elements
  • Complies with ANSI/ASME B30.16 and HAST-2 Standards
  • Cast steel safety latches
  • Dual pawl Weston style brake
$1,440.00
$919.00
As low as $29/mo
View Details
Jet ETM-949 Mill with 3-Axis ACU-RITE 303 (Knee) DRO and X-Axis JET Powerfeed and USA MadeAir Draw Bar 894146 at Elite Metal Tools
Jet ETM-949 Mill with 3-Axis ACU-RITE 303 (Knee) DRO and X-Axis JET Powerfeed and USA MadeAir Draw Bar 894146
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
$36,302.86
$29,549.00
As low as $584/mo
View Details
Jet Aloris CA Intro-Pro Set for Elite EGH-17" Lathes 892095 at Elite Metal Tools
Jet Aloris CA Intro-Pro Set for Elite EGH-17" Lathes 892095
  • #1 Turning and facing holder
  • Specifically designed for Elite EGH-1740 and EGH-1760 lathes
  • Super Precision Tool Post
$1,761.43
$1,459.00
As low as $47/mo
View Details
Jet Aloris CA Intro-Pro Set for Elite EGH-18" & 21" Lathes 892096 at Elite Metal Tools
Jet Aloris CA Intro-Pro Set for Elite EGH-18" & 21" Lathes 892096
  • #1 Turning and facing holder
  • Specifically designed for Elite EGH-1880, EGH-2180, and EGH-21120 lathes
  • Super Precision Tool Post
$1,761.43
$1,459.00
As low as $47/mo
View Details
Jet 1-Ton Aluminum Hand Chain Hoist with 15ft of Lift | AL100-100-15 133115 at Elite Metal Tools
Jet 1-Ton Aluminum Hand Chain Hoist with 15ft of Lift | AL100-100-15 133115
  • Extra large hand chain opening for side chain pulling
  • Sealed housing to provide extra protection against the elements
  • Complies with ANSI/ASME B30.16 and HAST-2 Standards
  • Cast steel safety latches
  • Dual pawl Weston style brake
$675.00
$459.00
View Details
Jet 5-PT, 5-Ton Heavy Duty Manual Trolley 252050 at Elite Metal Tools
Jet 5-PT, 5-Ton Heavy Duty Manual Trolley 252050
  • Built-in bumper guards on the side plates increase safety and extend trolley life
  • Complies with OSHA Regulations, ANSI / ASME B30.11 and B30.17 standards
  • Easily adjustable to wide-flange H-beams, standard I-beams, or curved track with the included spacer washers
  • Hardened large steel wheels and thicker double sealed lubricated ball bearings provide smooth movement
  • Welded heavy gauge steel frame and powder coat finish provide maximum durability and protection
$1,358.00
$865.98
As low as $28/mo
View Details
Jet JAT-650, 800 RPM, 1/4" Screwdriver 505650 at Elite Metal Tools
Jet JAT-650, 800 RPM, 1/4" Screwdriver 505650
  • Ergonomically Designed Grip
  • Fast-action chuck permits the changing of standard 1/4" hex bits
  • Heavy-duty ball bearing construction increases durability
  • Variable-speed trigger for precise speed control
  • Backed by the industry leading 2-Year Warranty
$326.00
$223.99
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.