JET

Jet JTM-1254RVS with NEWALL DP700 3X (Q) DRO, X Powerfeed & Air Power Drawbar 698139

Adjustable gibs throughout
Dual locks on all moveable surfaces
Heavy-duty spindle brake
Precision bored and honed milling head
Precision hardened and ground ways and table

$33,108.57

$26,949.00

As low as $533/mo

View Details

Jet 1/2-Ton Electric Chain Hoist 3-Phase 20' Lift | 1/2SS-3C-20 123200

All steel construction
NEMA 4X compliant push button control pendants
Durable powder coat finish
Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
Limit Switches- Upper and lower limiting switches increase safety by preventing the load chain from over traveling

$4,294.00

$2,741.99

As low as $89/mo

View Details

Jet JLP-300A-10SH, 3 Ton Lever Hoist, 10' Lift & Shipyard Hooks 287801

All steel construction
Impact resistant all steel construction for added durability and protection
Needle bearings support the load sheave to increase efficiency and promote smooth operation
JET’s improved easy free chain design is a two-step, no load, free chaining system. The system permits quicker hoist positioning and take up of slack chain, and is engineered not to free chain under load
NEW! Redesigned ergonomic grip allows for greater operator control and increased comfort

$820.00

$535.99

As low as $17/mo

View Details

Jet Servo 150 Series Y-Axis Table Powerfeed 350184

Accessory for JET ELITE Mills

$2,610.00

$2,159.00

As low as $70/mo

View Details

Jet JTM-949EVS Mill With 3-Axis Newall DP700 DRO (Quill) With X-Axis Powerfeed and Air Powered Draw Bar 690546

Automatic oiler releases 3 to 6 cc/cy of lubrication every 30 minutes
Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
Dual locks on all moveable surfaces
Spindle head is internally cooled extending bearing, belt and motor life
Swing away control box houses an e-stop and puts all controls at the operators fingertips

$25,892.86

$20,879.00

As low as $413/mo

View Details

Jet JTM-1050EVS2/230 Mill With Acu-Rite 203 DRO With X-Axis Powerfeed and Air Powered Drawbar 690620

Automatic oiler releases 3 to 6 cc/cy of lubrication at adjustable time intervals
Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
Dual locks on all moveable surfaces
Spindle head is internally cooled extending bearing, belt and motor life
Swing away control box houses an e-stop and puts all controls at the operators fingertips

$29,694.29

$23,899.00

As low as $472/mo

View Details

Jet JTM-4VS Mill With Newall DP700 DRO 691200

Adjustable gibs throughout
Heavy duty splined motor drive
Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
Large Diameter quill is chromed
One shot lubrication system

$19,655.40

$15,879.00

As low as $314/mo

View Details

Jet JLH-150-10PSH 1-1/2 Ton Lever Hoist, 10' Lift with Overload Protection & Shipyard Hooks 376801

All steel construction
Caged needle bearings support the load sheave to increase efficiency and promote smooth operation
Enhanced ergonomic grip allows for greater operator control and increased comfort
Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
Heat Treated Load Plates

$862.00

$561.99

As low as $18/mo

View Details

Jet GH-2280ZX With Taper Attachment and Collet Closer 321575

Articulating LED work lamp
Centrally located controls with jog button
Electronic Chuck Key Holder
Five position automatic carriage stop increases productivity
Full length splash guard and coolant return

$54,942.86

$44,799.00

As low as $886/mo

View Details

Jet 5-Ton Hand Chain Hoist with 15' Lift & Overload Protection | L-100-500WO-15 208115

Double sealed ball bearings support the load sheave to increase efficiency and promote smooth operation
Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
Heat Treated Load Plates
Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist

$1,824.00

$1,165.99

As low as $37/mo

View Details

Jet 5C Lever Type Collet Closer For ELITE EGH-1740 and EGH-1760 892156

Precision ground components
Rear mounted lever action
Some drilling and other modifications may be required for installation
Specifically designed for Elite EGH-1740 and EGH-1760 lathes

$2,931.43

$2,389.00

As low as $77/mo

View Details

Jet 1-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift | TS100-230-015 140237

The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
Two Speed Motor ensures the correct speed for the job with a click of a button
IP55 TEFC Motor with Class F insulation for working in harsh environments

$8,823.00

$5,534.99

As low as $179/mo

View Details

Jet JET — Replacement Blade, 1-5/16" x 0.043" x 155-1/2 5/8VT 413402

Replacement Blade for Jet Sawing
Shop the Jet store for all your replacement part needs

$435.00

View Details

Jet JET — Replacement Blade, 1-5/16" x 0.043x 155-1/2 6/10VT 413403

Replacement Blade for Jet Saws
Shop the Jet store for all your replacement part needs

$435.00

View Details

Jet JET — Replacement Outer Filter for IAFS-3000 415156

$229.10

$220.00

View Details

Jet EVS-949 Mill with 3-Axis Newall DP700 (Knee) DRO and X, Y, Z-Axis JET Powerfeeds and USA Made Air Draw Bar 894371

Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
The mounted control box houses major mill functions as well as an emergency stop button

$42,654.57

$34,719.00

As low as $687/mo

View Details

Jet 3-Ton Aluminum Hand Chain Hoist with 30ft of Lift | AL100-300-30 133330

Extra large hand chain opening for side chain pulling
Sealed housing to provide extra protection against the elements
Complies with ANSI/ASME B30.16 and HAST-2 Standards
Cast steel safety latches
Dual pawl Weston style brake

$2,170.00

$1,385.00

As low as $45/mo

View Details

Jet TS050-230-020,1/2-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift, MT050 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 16ft 140235K

The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
Two Speed Motor ensures the correct speed for the job with a click of a button
IP55 TEFC Motor with Class F insulation for working in harsh environments

$9,794.00

$6,142.00

As low as $199/mo

View Details

Jet TS200-230-010, 2-Ton Two Speed Electric Chain Hoist 3-Phase 10' Lift, MT200 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 6ft 140239K

The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
Two Speed Motor ensures the correct speed for the job with a click of a button
IP55 TEFC Motor with Class F insulation for working in harsh environments

$12,610.00

$7,909.00

As low as $257/mo

View Details

Jet ETM-949 Mill with 3-Axis Newall DP700 (Quill) DRO and X-Axis JET Powerfeed and USA Made Air Draw Bar 894160

Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
The mounted control box houses major mill functions as well as an emergency stop button

$36,118.77

$29,399.00

As low as $581/mo

View Details

Jet ETM-949 Mill with 3-Axis Newall DP700 (Knee) DRO and X-Axis JET Powerfeed 894166

Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
The mounted control box houses major mill functions as well as an emergency stop button

$33,022.77

$26,879.00

As low as $531/mo

View Details

Jet ETM-949 Mill with 3-Axis Newall DP700 (Knee) DRO and X-Axis JET Powerfeed and USA Made Air Draw Bar 894167

Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
The mounted control box houses major mill functions as well as an emergency stop button

$39,297.81

$29,579.00

As low as $585/mo

View Details

Jet JET — Z-Axis Table Powerfeed for 350196

Adjustable stops allow automatic shut off
Built-in clutch helps prevent damage in overload
Includes rapid traverse button
Factory installation is available

$1,173.71

$965.00

As low as $31/mo

View Details

Jet E-1236VS With Taper Attachment 892300

4-Position Carriage Stop
Chuck guards are standard equipment on all ELITE lathes for increased safety
Front facing chip pan allows easy chip removal from the front of the machine
Hardened and ground gears in headstock reduce vibration and deflection
Integrated locking tool cabinet in stand on 12" Lathe

$22,752.86

$18,439.00

As low as $364/mo

View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.