Cantek

  • Layout
Cantek 5HP 230V 14” Pneumatic Cut-Off Saw with Foot Pedal Control (LH or RH) PCS14 at Elite Metal Tools
Cantek 5HP 230V 14” Pneumatic Cut-Off Saw with Foot Pedal Control (LH or RH) PCS14
  • Cutting Capacity (Thickness x Width): 1″ x 10″, 2″ x 9″, 3″ x 8″
  • Cycle Speed: 95 strokes/min
  • Cycle Operation: Air
  • Saw Blade Size: 14″
$6,300.00
As low as $204/mo
View Details
Cantek 230V 3-Sided Linear Brush Sander LBS-300-5S at Elite Metal Tools
Cantek 230V 3-Sided Linear Brush Sander LBS-300-5S
  • Max. working width: 11″
  • Max. working height: 4″
  • Feed speed (Variable): 6.5 ~ 27 FPM
  • Speed of sanding wheel: 200 ~ 1200 RPM            
$17,850.00
As low as $353/mo
View Details
Cantek 12” x 166” Oscillating Edge Sander OES-512D at Elite Metal Tools
Cantek 12” x 166” Oscillating Edge Sander OES-512D
  • Sanding motor: 10 HP
  • Sanding belt size: 12” x 166”
  • Front & Rear Table Size: 10.43” x 60.9”
  • Table: side: 13.8” x 17.7”
$11,550.00
As low as $375/mo
View Details
Cantek 230V Three Phase 43” Wide Belt Sander with 20HP Motor and 60” Belt C431 at Elite Metal Tools
Cantek 230V Three Phase 43” Wide Belt Sander with 20HP Motor and 60” Belt C431
  • Abrasive belt size: 44” x 60”
  • Max width stock: 43”
  • Max thickness opening: 5.9”
  • Feed speed (variable): 13 to 52 FPM
$27,299.00
As low as $540/mo
View Details
Cantek 7.5HP 20” Miter Cut-Off Saw PCM508 at Elite Metal Tools
Cantek 7.5HP 20” Miter Cut-Off Saw PCM508
  • Cutting Angles: +60° ~ 0° ~-60°
  • Cycle Speed: 30-45 cuts/min
  • Saw Blade Size: 20″
  • Saw Arbor Diameter: 1″
$17,850.00
As low as $353/mo
View Details
Cantek 15HP 230V 30” Pneumatic Cut-Off Saw with Foot Pedal Control (LH or RH) PCS30 at Elite Metal Tools
Cantek 15HP 230V 30” Pneumatic Cut-Off Saw with Foot Pedal Control (LH or RH) PCS30
  • Cutting Capacity (Thickness x Width): 2″x27″, 4″x24″, 6″x21″, 8″x16″, 10”x10”
  • Cycle Speed: 10-15 strokes/min
  • Cycle Operation: Pneumatic
  • Saw Blade Size: 30”
$18,795.00
As low as $371/mo
View Details
Cantek 15HP 230V 24” Pneumatic Cut-Off Saw with Foot Pedal Control (LH or RH) PCS24 at Elite Metal Tools
Cantek 15HP 230V 24” Pneumatic Cut-Off Saw with Foot Pedal Control (LH or RH) PCS24
  • Cutting Capacity (Thickness x Width): 2″x21″, 4″x19″, 6″x15″, 7″x8″
  • Cycle Speed: 40 strokes/min
  • Cycle Operation: Air / mechanical
  • Saw Blade Size: 24″ max. (20″ min.)
$13,860.00
As low as $450/mo
View Details
Cantek 10HP 230V 18” Pneumatic Cut-Off Saw with Foot Pedal Control (LH or RH) PCS18 at Elite Metal Tools
Cantek 10HP 230V 18” Pneumatic Cut-Off Saw with Foot Pedal Control (LH or RH) PCS18
  • Cutting Capacity (Thickness x Width): 2″ x 12″, 3″ x 11″, 4″ x 10″
  • Cycle Speed: 45 strokes/min
  • Cycle Operation: Air
  • Saw Blade Size (Optional): 18″
$6,930.00
As low as $225/mo
View Details
Cantek 230V Three Phase 37” Two Head Wide Belt Sander with Variable Feed Speed C372 at Elite Metal Tools
Cantek 230V Three Phase 37” Two Head Wide Belt Sander with Variable Feed Speed C372
  • Abrasive belt size: 37” x 60”
  • Main motor (First head): 20HP 
  • Max thickness opening: 5”
  • Feed speed (variable): 13 to 52 FPM 
$29,085.00
As low as $575/mo
View Details
Cantek 230V Single Phase 36” Wide Belt Sander with 60” Belt C371 at Elite Metal Tools
Cantek 230V Single Phase 36” Wide Belt Sander with 60” Belt C371
  • Abrasive belt size: 37” x 60” 
  • Main motor: 10HP 
  • Feed speed (variable): 13 to 52 FPM
  • Max thickness opening: 5”
$20,895.00
As low as $413/mo
View Details
Cantek 230V Three Phase 36” Wide Belt Sander with 60” Belt C371 at Elite Metal Tools
Cantek 230V Three Phase 36” Wide Belt Sander with 60” Belt C371
  • Abrasive belt size: 37” x 60” 
  • Main motor: 20HP 
  • Feed speed (variable): 13 to 52 FPM
  • Max thickness opening: 5”
$20,199.00
As low as $399/mo
View Details
Cantek 9” x 138” Oscillating Edge Sander PW-120E at Elite Metal Tools
Cantek 9” x 138” Oscillating Edge Sander PW-120E
  • Working Capacity (LxH) 47” x 8”
  • Belt Size (LxH) 138 ½” x 9”
  • Sanding Belt Speed 1080 m/min (3544 FPM)
  • Motor 3HP: 230-volt 3 phase
$7,875.00
As low as $255/mo
View Details
Cantek 15HP 460V 24” Pneumatic Cut-Off Saw with Foot Pedal Control (LH or RH) PCS24 at Elite Metal Tools
Cantek 15HP 460V 24” Pneumatic Cut-Off Saw with Foot Pedal Control (LH or RH) PCS24
  • Cutting Capacity (Thickness x Width): 2″x21″, 4″x19″, 6″x15″, 7″x8″
  • Cycle Speed: 40 strokes/min
  • Cycle Operation: Air / mechanical
  • Saw Blade Size: 24″ max. (20″ min.)
$14,385.00
As low as $467/mo
View Details
Cantek 10HP 24” Miter Cut-Off Saw PCM610 at Elite Metal Tools
Cantek 10HP 24” Miter Cut-Off Saw PCM610
  • Cutting Angles: +60° ~ 0° ~ -60°
  • Cycle Speed: 35-40 cuts/min
  • Saw Blade Size: 24″
  • Saw Arbor Diameter: 1″
$28,140.00
As low as $556/mo
View Details
Cantek Classic S Single Phase 24" x 60" Wide Belt Sander S251 at Elite Metal Tools
Cantek Classic S Single Phase 24" x 60" Wide Belt Sander S251
  • Abrasive Belt Size: 25” x 60”
  • Working Width: 25″
  • Minimum Part Length: 13″
  • Minimum Thickness Opening: 5″
$13,860.00
As low as $450/mo
View Details
Cantek 230V Three Phase 25” Wide Belt Sander C251 at Elite Metal Tools
Cantek 230V Three Phase 25” Wide Belt Sander C251
  • Abrasive belt size: 25” x 60”
  • Maximum width stock: 24”
  • Maximum thickness opening: 4”
  • Infeed table: 11-1/2”
$11,865.00
As low as $385/mo
View Details
Cantek 6” x 108” 1.5 HP Single Phase Edge Sander CT-108 at Elite Metal Tools
Cantek 6” x 108” 1.5 HP Single Phase Edge Sander CT-108
  • Sanding belt size: 6″ x 108″
  • Motor: 1.5 HP (1-Phase)
  • Front table: 37″ x 7 ¾”
  • Side table: 19″ x 12″
$3,150.00
As low as $102/mo
View Details
Cantek Professional SR 230V Three Phase 37” Two Head Wide Belt Sander with 75” Belt SR37DA at Elite Metal Tools
Cantek Professional SR 230V Three Phase 37” Two Head Wide Belt Sander with 75” Belt SR37DA
  • 1st Main Motor: 20 HP
  • Working Width: 36″
  • Minimum Part Length: 16.9″
  • Maximum Thickness Opening: 4.7″
$43,260.00
As low as $856/mo
View Details
Cantek 9” x 165” Oscillating Edge Sander OES-509D at Elite Metal Tools
Cantek 9” x 165” Oscillating Edge Sander OES-509D
  • Sanding motor: 7.5 HP
  • Sanding belt size: 9” x 165”
  • Front & Rear Table Size: 10.43” x 60.9”
  • Table: side: 13.8” x 17.7”
$9,975.00
As low as $324/mo
View Details
Cantek Classic S Single Phase 36” x 60” Wide Belt Sander S371 at Elite Metal Tools
Cantek Classic S Single Phase 36” x 60” Wide Belt Sander S371
  • Main Motor: 15 HP
  • Working Width: 37″
  • Minimum Part Length: 12.5″
  • Maximum Thickness Opening: 5″
$18,795.00
As low as $371/mo
View Details
Cantek 10HP 230V 18” Non-Ferrous Pneumatic Cut-Off Saw with Foot Pedal Control (LH or RH) PCS18M at Elite Metal Tools
Cantek 10HP 230V 18” Non-Ferrous Pneumatic Cut-Off Saw with Foot Pedal Control (LH or RH) PCS18M
  • Cutting Capacity (Thickness x Width): 2″ x 12″, 3″ x 11″, 4″ x 10″
  • Cycle Speed: 45 strokes/min
  • Cycle Operation: Air
  • Saw Blade Size (Optional): 18″
$9,345.00
As low as $303/mo
View Details
Cantek Classic S 20HP 230V Three Phase 36" x 60" Two Head Wide Belt Sander S372 at Elite Metal Tools
Cantek Classic S 20HP 230V Three Phase 36" x 60" Two Head Wide Belt Sander S372
  • Feed Motor: 1 HP
  • Working Width: 37″
  • Minimum Part Length: 12.5″
  • Maximum Thickness Opening: 5″
$24,675.00
As low as $488/mo
View Details
Cantek 10HP 460V Semi-Optimizing Automatic Defect Cut-Off Saw CFS100 at Elite Metal Tools
Cantek 10HP 460V Semi-Optimizing Automatic Defect Cut-Off Saw CFS100
  • Max. Cutting Range (W x H) – 11.8” x 2.75” OR 5.9” x 3.9” with 18” Blade
  • Saw Spindle Speed: 3200 RPM
  • Feed Motor (Servo Motor): 2.7HP
  • Max. Feed Speed: Variable to 262 ft/min
$58,065.00
As low as $1,149/mo
View Details
Cantek 20HP 230V 36” Pneumatic Cut-Off Saw with Foot Pedal (LH or RH) PCS36 at Elite Metal Tools
Cantek 20HP 230V 36” Pneumatic Cut-Off Saw with Foot Pedal (LH or RH) PCS36
  • Cutting Capacity (Thickness x Width): 2″x33″, 4″x31″, 6″x29″, 8”x25”, 10”x20”, 12”x12”
  • Cycle Speed: 10-15 strokes/min
  • Cycle Operation: Pneumatic
  • Saw Blade Size: 36”
$26,250.00
As low as $519/mo
View Details

First opening in 1991 and since then have become an internationally acclaimed brand and a pioneer of the global market. They are located in Antalya, Turkey. Cantek is a big supplier of solid wood and panel machinery. They have made a big expansion in their company in the past 31 years in the woodworking machinery industry. 

If you are interested in woodworking saws or anything else Cantek has to offer please contact us. Here at Elite Metal Tools we work our hardest to satisfy all questions and have low prices.