Cantek

  • Layout
Cantek Planer Sander Series 230V Three Phase 36” Wide Belt Sander SPL900NDA at Elite Metal Tools
Cantek Planer Sander Series 230V Three Phase 36” Wide Belt Sander SPL900NDA
  • Abrasive belt size: 36” x 75” 
  • Min part length: 16.9”
  • Max thickness opening: 4.7”
  • Feed speed (variable): 31 to 59 FPM 
$52,710
As low as $1,043.13/mo
View Details
Cantek 50 HP 230V 12" Multi Ripsaw MRS-300 at Elite Metal Tools
Cantek 50 HP 230V 12" Multi Ripsaw MRS-300
  • Maximum Cutting Width: 11.8” (300mm)
  • Saw Motor HP: 50 HP – Voltage 230/3/60
  • Feed Speeds: 25 – 100 FPM (7.5~30 m/min)
  • Table Size: 60″ x 30” (1530x760mm)
$41,685
As low as $824.94/mo
View Details
Cantek 15HP 230V 30” Pneumatic Cut-Off Saw with Foot Pedal Control (LH or RH) PCS30 at Elite Metal Tools
Cantek 15HP 230V 30” Pneumatic Cut-Off Saw with Foot Pedal Control (LH or RH) PCS30
  • Cutting Capacity (Thickness x Width): 2″x27″, 4″x24″, 6″x21″, 8″x16″, 10”x10”
  • Cycle Speed: 10-15 strokes/min
  • Cycle Operation: Pneumatic
  • Saw Blade Size: 30”
$21,000
As low as $415.59/mo
View Details
Cantek Classic S Single Phase 25" x 60" Wide Belt Sander S251 at Elite Metal Tools
Cantek Classic S Single Phase 25" x 60" Wide Belt Sander S251
  • Abrasive Belt Size: 25” x 60”
  • Working Width: 24″
  • Minimum Part Length: 13″
  • Minimum Thickness Opening: 5.9″
$15,330
As low as $303.38/mo
View Details
Cantek 230V Three Phase 37” Two Head Wide Belt Sander with Variable Feed Speed C372 at Elite Metal Tools
Cantek 230V Three Phase 37” Two Head Wide Belt Sander with Variable Feed Speed C372
  • Abrasive belt size: 37” x 60”
  • Main motor (First head): 20HP 
  • Max thickness opening: 5”
  • Feed speed (variable): 13 to 52 FPM 
$32,025
As low as $633.77/mo
View Details
Cantek 32" Three Phase 20 HP Band Resaw with Feeder HB800 at Elite Metal Tools
Cantek 32" Three Phase 20 HP Band Resaw with Feeder HB800
  • Table size: 45-1/4″ x 31-1/2″
  • Throat capacity: 30-5/8″
  • Height capacity: 15-3/8″
  • Comes with a feeder
$19,110
As low as $378.18/mo
View Details
Cantek 7.5HP Non-Tilt Spindle Shaper SS512CB at Elite Metal Tools
Cantek 7.5HP Non-Tilt Spindle Shaper SS512CB
  • Table Size: 31.5” x 39.4″
  • Spindle Speeds (5): 3000/4000/6000/8000/10000 RPM
  • Spindle Taper: 5 MT
  • Spindle Diameter: 1.25”
$10,710
As low as $348.07/mo
View Details
Cantek 25” x 20” Double Surface Planer GT635ARD-20 at Elite Metal Tools
Cantek 25” x 20” Double Surface Planer GT635ARD-20
  • 25″ x 20″ capacity
  • Cast-iron machine body and table for vibration free cutting
  • Top planing head motor: 25 HP
  • Feed speed (variable): 26-80 FPM
$54,390
As low as $1,076.37/mo
View Details
Cantek Three Phase Standard Automatic Edgebander MX340M at Elite Metal Tools
Cantek Three Phase Standard Automatic Edgebander MX340M
  • Feeding speed: 23 FPM
  • Panel thickness: 0.472~1.77”
  • Edge thickness: 0.0158”~0.118”
  • Power: 5 HP Three Phase
$19,740
As low as $390.65/mo
View Details
Cantek 230V Three Phase 29FPM Automatic Compact Edgebander with Quick-Change Glue Pot MX340 at Elite Metal Tools
Cantek 230V Three Phase 29FPM Automatic Compact Edgebander with Quick-Change Glue Pot MX340
  • Panel thickness: 0.315” - 1.77”
  • Min panel length: 6.7”
  • Working table height: 33.5”
  • Dust collection outlet: Ø 5” x 2 = 1200 CFM 
$26,145
As low as $517.40/mo
View Details
Cantek 3 HP Single Phase 10” Tilt Arbor Table Saw TA10 at Elite Metal Tools
Cantek 3 HP Single Phase 10” Tilt Arbor Table Saw TA10
  • Table size: 36″x27″
  • Max. rip to right of blade: 50″
  • Max. depth of cut at 90°: 3″
  • Max. depth of cut at 45°: 2″
$3,150
As low as $102.37/mo
View Details
Cantek 10HP 460V Semi-Optimizing Automatic Defect Cut-Off Saw CFS100 at Elite Metal Tools
Cantek 10HP 460V Semi-Optimizing Automatic Defect Cut-Off Saw CFS100
  • Max. Cutting Range (W x H) – 11.8” x 2.75” OR 5.9” x 3.9” with 18” Blade
  • Saw Spindle Speed: 3200 RPM
  • Feed Motor (Servo Motor): 2.7HP
  • Max. Feed Speed: Variable to 262 ft/min
$64,680
As low as $1,280.01/mo
View Details
Cantek SR-Series 230V Three Phase 37”x75” Variable-Speed Two-Head Wide Belt Sander with Steel Contact Drum SR37DA at Elite Metal Tools
Cantek SR-Series 230V Three Phase 37”x75” Variable-Speed Two-Head Wide Belt Sander with Steel Contact Drum SR37DA
  • Working width: 36”
  • Max thickness opening: 4.7”
  • Feed speed (variable): 13 to 59 FPM
  • Pass line height: 37”
$50,190
As low as $993.26/mo
View Details
Cantek SR-Series 230V Three Phase 37”x75” Variable-Speed Two-Head Wide Belt Sander with Rubber Contact Drum SR37DA at Elite Metal Tools
Cantek SR-Series 230V Three Phase 37”x75” Variable-Speed Two-Head Wide Belt Sander with Rubber Contact Drum SR37DA
  • Working width: 36”
  • Max thickness opening: 4.7”
  • Feed speed (variable): 13 to 59 FPM
  • Pass line height: 37”
$48,090
As low as $951.70/mo
View Details
Cantek 12” 460V Glue Line Ripsaw C12RSH at Elite Metal Tools
Cantek 12” 460V Glue Line Ripsaw C12RSH
  • Feed speeds variable: 50 to 120 FPM
  • Maximum workpiece thickness: 3.35″
  • Minimum workpiece length: 8″
  • Table size: 39″ x 57″
$22,785
As low as $450.91/mo
View Details
Cantek 20HP 230V Bottom Cutting Straight Line Ripsaw with 10’ Guarantee Glue Line R18 (20HP) at Elite Metal Tools
Cantek 20HP 230V Bottom Cutting Straight Line Ripsaw with 10’ Guarantee Glue Line R18 (20HP)
  • Minimum Length: 6″
  • Maximum Sawblade Diameter: 18″
  • Sawblade Included with Machine: 14″
  • Sawblade Bore: 2″
$32,760
As low as $648.32/mo
View Details
Cantek 5 HP Three Phase 5’ Sliding Table Saw with Scoring P30 at Elite Metal Tools
Cantek 5 HP Three Phase 5’ Sliding Table Saw with Scoring P30
  • Sliding table dimension: 63” x 12.4”
  • 5 HP Three Phase main motor with ¾ HP scoring motor
  • Cutting width – ripping: 51” max
  • 0-45° Manual Tilting adjustment for main saw blade
$9,765
As low as $317.36/mo
View Details
Cantek 60 HP 460V Multi Ripsaw MRS-12 at Elite Metal Tools
Cantek 60 HP 460V Multi Ripsaw MRS-12
  • Saw Motor: 60 HP 460 volt
  • Feed Speeds: 25 – 100 FPM
  • Table Size: 30” x 60″
  • Table Height from floor: 33.5″
$50,190
As low as $993.26/mo
View Details
Cantek 24” Heavy Duty Cardan Shaft Drive Double Surface Planer GT610HI at Elite Metal Tools
Cantek 24” Heavy Duty Cardan Shaft Drive Double Surface Planer GT610HI
  • Max. Working Width: 24”
  • Max. Working Thickness: 8”
  • Min. Working Thickness: 5/16″
  • Min. Working Length: 12”
$77,175
As low as $1,527.29/mo
View Details
Cantek 7.5HP Spindle Shaper with Tilting Spindle SS512TB at Elite Metal Tools
Cantek 7.5HP Spindle Shaper with Tilting Spindle SS512TB
  • Table Size: 31.5” x 39.4″
  • Tilting Spindle: -5° to +45°
  • Spindle Taper: 5 MT
  • Spindle Diameter: 1.25”
$13,230
As low as $429.97/mo
View Details
Cantek 5 HP Three Phase 10” Tilt Arbor Table Saw TA10 at Elite Metal Tools
Cantek 5 HP Three Phase 10” Tilt Arbor Table Saw TA10
  • Table size: 36″x27″
  • Max. rip to right of blade: 50″
  • Max. depth of cut at 90°: 3″
  • Max. depth of cut at 45°: 2″
$3,150
As low as $102.37/mo
View Details
Cantek 10HP 230V 18” Non-Ferrous Pneumatic Cut-Off Saw with Foot Pedal Control (LH or RH) PCS18M at Elite Metal Tools
Cantek 10HP 230V 18” Non-Ferrous Pneumatic Cut-Off Saw with Foot Pedal Control (LH or RH) PCS18M
  • Cutting Capacity (Thickness x Width): 2″ x 12″, 3″ x 11″, 4″ x 10″
  • Cycle Speed: 45 strokes/min
  • Cycle Operation: Air
  • Saw Blade Size (Optional): 18″
$10,920
As low as $354.90/mo
View Details
Cantek 7.5 HP Three Phase 20” Heavy Duty Planer with Spiral Head P508HV at Elite Metal Tools
Cantek 7.5 HP Three Phase 20” Heavy Duty Planer with Spiral Head P508HV
  • Planning width: 20"
  • Planning thickness: 11-13/16"
  • Depth of cut: 5/16"
  • Table size: 22" x 29"
$15,855
As low as $313.77/mo
View Details
Cantek Standard Three Phase Automatic Edgebander with Pre-milling MX350M at Elite Metal Tools
Cantek Standard Three Phase Automatic Edgebander with Pre-milling MX350M
  • Feeding speed: 23 FPM (7 m/min.)
  • Panel thickness: 0.472~1.77” (12~45 mm)
  • Edge thickness: 0.0158”~0.118”  (0.4 ~ 3 mm)
  • Working table height: 33.7” (856mm)
$26,250
As low as $519.48/mo
View Details

First opening in 1991 and since then have become an internationally acclaimed brand and a pioneer of the global market. They are located in Antalya, Turkey. Cantek is a big supplier of solid wood and panel machinery. They have made a big expansion in their company in the past 31 years in the woodworking machinery industry. 

If you are interested in woodworking saws or anything else Cantek has to offer please contact us. Here at Elite Metal Tools we work our hardest to satisfy all questions and have low prices.