Baileigh Industrial

• 14" Blade
• Variable speed, inverter driven with digital readout for rpm
• Miters 45º Left & Right
• 4.7" Round Tube Capacity at 90º

• 10" Blade
• Manual Feed
• Mieters up to 45º left and right
• 110V, 1PH

• Max. Drill Capacity: 2-1/2" (No.45 steel) & 2-7/8" (HT200 cast iron)
• Max. Tapping Capacity: 1-3/4" (No.45 steel) & 2" (HT200 cast iron)
• Distance from Spindle to Column Center: 13-3/4" to 63"
• Diameter of Column: 13.7"

• 9" Blade
• Manual Feed with Integrated Coolant System
• Miters 45º left
• 110V

• Spindle Speeds: Inverter Driven Variable
• Max. Drill Capacity: 1
• Tapping Capacity: 5/8"
• Drill Capacity Cast Iron: 1-1/16"

• 2" maximum drilling capacity
• Heavy duty construction
• Power down feed
• Large 63" column

• 12.5" Blade
• Manual Feed
• 4" Tube at 90º
• 220V, 1PH

• 1.57" maximum drilling capacity
• Heavy duty construction
• Power down feed
• 39.3" reach

• 1.5HP Motor 
• 5/8" Tapping Capacity 
• 1" Drill Capacity 
• 5.3" Spindle Travel 

• 11" Blade
• Manual Feed
• Miters up to 45º Left & Right
• 110V, 1PH

• Spindle Speed 150-3000rpm
• Spindle Travel 5.3" 
• Drill Capacity Steel 1" 
• Quill Diameter 2.44" 

• Variable-speed inverter-driven head
• 3-speed power down feed
• Auto reverse tapping feature
• Digital RPM readout

• Filter Size 12" x 24"
• CFM 1,255 Max – 916 Filtered Air
• Remote Start Radio Frequency (RF) With Timer Included
• Speeds 3

• Filter Type 99% 5 Micron – 91% 1 Micron
• Number of Filters 2
• Filter Size 20" x 24"
• CFM 2450 Max – 2132 Filtered Air

• 2.95" Quill Diameter 
• Spindle Speed 85-2000rpm 
• 2HP Motor 
• 1.5" Drill Capacity 

• Table Size: 63" x 39"
• Max. Table Height: 39"
• Travel Speed: 25 sec. for Max. Height
• Capacity: 4,400 lbs.

• 14" Blade
• Miters 45º Left & Right with self centering vice
• 220V, 3PH
• 4.33" Round Tube Capacity at 90º

• 2 hp motor runs on 220-volt 3-phase power.
• 26-3/4” swing to tackle large pieces of material
• Drills a maximum capacity of 1.57” with a tapping capacity of up to 1”
• Massive column and cast steel base reduce flexing even when you’re drilling at full capacity

• Miters left and right 
• Centering vise 
• Cuts non-ferrous metals 
• Blade turns at 3200 rpm

• Shelf Size (L x W): 21 ¾” x 14”
• Shelf Max Weight Capacity: 100 lbs.
• Cart Base Max Weight Capacity: 425 lbs.
• Heavy 14ga Steel Construction

• 41/4" Capacity
• Pneumatic centering vise, hydraulic blade descent
• Automatic shut-off and vise release
• 220V, 3PH

The CS-C485SA is a 16-1/2" vertical column cold saw and is a semi automatic machine that uses a Yaskawa® inverter drive to control the saw blade speed up to 120 rpm's. This cold saw comes standard with an industrial grade coolant system, drive motor and hydraulic feeding system that will provide decades of profitable use to any demanding fabrication or machine shop.

• 3.5HP Motor 
• 1.5" Drill Capacity 
• 108-1800rpm Spindle Speed
• 7.48" Spindle Travel 

• Spindle Taper MT3
• Table Slot .625"
• Tapping Capacity 1/2"
• Main Motor 2 hp