Baileigh Industrial

  • Rolling Capacity: 20 ga. (0.036”)
  • Shear Capacity: 20 ga. (0.036”)
  • Min. Rolling Dia.: 1.70”
  • Bending Capacity: 20 ga. (0.036”)
$2,791.64
$2,299.00

  • Rolling Capacity: 20 ga. (0.036”)
  • Shear Capacity: 20 ga. (0.036”)
  • Bending Capacity: 20 ga. (0.036”)
  • Finger Lengths: 1", 2-1/8", 3-1/8", 6", 8", 10-1/8"
$1,759.50
$1,449.00

  • Spindle Speed 150-3000rpm
  • Spindle Travel 5.3" 
  • Drill Capacity Steel 1" 
  • Quill Diameter 2.44" 
$5,642.74
$4,649.00

  • Built For Years and Years of Production
  • 7.5 HP Motor
  • Jog, Single or Continuous Cutting Modes
  • Side Gauges
$36,233.07
$29,839.00

  • Air Operated 90-115 PSI
  • Max. Capacity 11ga.
  • 50 Strokes Per Minute
  •  5" Blade Length 
$6,349.50
$5,229.00

  • 50 Ton of Pressure
  • 78" Bed Length
  • 2-Axis CNC System
  • 4HP Main Motor
$50,440.21
$41,539.00

  • Prefect for Production Bending, Punching and Shearing of Small Parts
  • Cylinder Stroke Accuracy to +/- .002"
  • Easy To Use Programmable NC Controller
  • Manual Back Gauge Standard
$29,724.47
$24,479.00

  • Electric Back Gauge With Manual Micrometer Adjustment Standard
  • Extra-Wide Guideways For Exceptional Rigidity
  • Adjustable 2-Step Downward Travel For Higher Productivity
  • Oversized Hydraulic Tank With High-Performance Pump Smooths And Stabilizes Oil Flow
$51,484.42
$42,399.00

  • Notching Capacity Pipe: 1/4", 3/8", 1/2", 3/4", 1", 1-1/4", 1-1/2",2"
  • Power: 220V / 1-phase
  • Designed to notch schedule 40 pipe ranging from 0.25” to 2” in size
  • Makes perfect 90° notches in seconds
$6,531.64
$5,379.00

  • 10 Gauge Mild Steel Capacity
  • 13 Powerful Hold Downs Clamps
  • Multiple Cutting Edges Allowing for Longer Blade Life
  • Can Be Operated In Jog, Single-Cycle, or Continuous Cycle Mode
$49,592.32
$40,839.00

  • 52" x 1/4"-Mild Steel Capacity
  • Front and Back Gauges
  • Fast Blade Gap Adjustment
  • 220 / 3-Phase
$46,335.93
$38,159.00

  • Power- 220V / Three Phase
  • 140 Tons Of Bending Force
  • Standard With a Multi-Vee Bottom Die And Gooseneck Punch
  • Accuracy of .01mm
$97,141.64
$79,999.00

  • 2.95" Quill Diameter 
  • Spindle Speed 85-2000rpm 
  • 2HP Motor 
  • 1.5" Drill Capacity 
$6,855.71
$5,649.00

  • 2 hp motor runs on 220-volt 3-phase power.
  • 26-3/4” swing to tackle large pieces of material
  • Drills a maximum capacity of 1.57” with a tapping capacity of up to 1”
  • Massive column and cast steel base reduce flexing even when you’re drilling at full capacity
$14,741.43
$11,999.00

  • 1-1/2", 2" Notching Capacity (Pipe)
  • Manual 
  • 36lbs
  • 20"x7"x7" Dimensions 
$1,055.21
$912.00

  • 3HP Motor 
  • 50 Strokes Per Minute 
  • 9ga. Max. Capacity Mild Steel 
  • 220V/3-Phase 
$14,395.31
$11,854.99

  • 70" x 1/4" Mild Steel Capacity
  • Front Material Gauges
  • Fast Blade Gap Adjustment
  • Shadow Line for Material Placement
$60,263.79
$49,629.00

  • The Industry's Largest Horizontal Bending Press
  • 7.5 HP Motor
  • Produces 78 Tons of Fabricating Force
  • Custom Tooling is Available Upon Request
$48,570.21
$39,999.00

  • 4HP Motor 
  • 15 Strokes Per Minute 
  • Max. Capacity .237" 
  • 30º-140º Variable Notch Angle 
$26,360.93
$21,709.00

  • 224 Tons Of Bending Pressure
  • Available In 10' Or 13' Tables
  • Accuracy Of + - .01mm
  • Comes Standard With A Multi-Vee Bottom Die And Gooseneck Punch
$117,286.64
$96,589.00

  • Back Gauge Length: 24"
  • Thickness (SS): 16 ga. (20 ga.)
  • Front Gauge Length: 24"
  • Blade Angle: 1°
$6,932.36
$5,709.00

  • Electric Back Gauge With Manual Micrometer Adjustment Standard
  • Extra-Wide Guideways For Exceptional Rigidity
  • Adjustable 2-Step Downward Travel For Higher Productivity
  • Oversized Hydraulic Tank With High-Performance Pump
$45,461.59
$37,439.00

  • 28 Strokes Per Minute
  • 8 Gauge Mild Steel Shearing Capacity
  • Built For Heavy Duty Production
  • 10 HP Motor
$40,511.19
$33,359.00

  • Notching Capacity (OD) .75" - 3"
  • Angle Adjustment 0 – 60°
  • Belt Size 6" x 79"
  • Belt Speed 5400 (fpm)
$8,753.79
$7,209.00

Baileigh Industrial first arose in 1999 with cutting edge designs and materials that handle maximum capacities with ease. They are located in Manitowoc, Wisconsin along with other locations all around the world. They specialize in Metal Forming and shaping, Hydraulic benders made from heavy steel plates and Industrial grade hydraulics, and Heavy duty machines in manual and CNC configurations. They also produce Planers such as Helical Head Planers and Spiral Head Planers.

If you are in need of Heavy duty machines or Hydraulic benders or interested in Baileigh Industrials’ Planers please contact us. Here at Elite Metal Tools we offer low prices and one of a kind customer service.